• BALLAST WEIGHT-VARIOUS # AVAILABLE - CALL OR E-MAIL WITH QUESTIONS. (INVENTORY VARIES) -NOW IN STOCK-.$1.00 PER POUND 
• SPANNER WRENCH for LOWER SCREW-IN BALL JOINT - LIKE NEW SHAPE, USED TWICE, SPEEDWAY P.N. 910-82160, for USE WITH MOOG K772, -$8.50
• UB MACHINE CUSTOM WEIGHT CLAMPS - CUSTOM WEIGHT CLAMP FOR 2x3 RAILS - $15 (QTY of 2)
• 7 LB SHOP FIRE EXTINGUISHER - RECHARGEABLE DRY CHEMICAL STYLE EXTINGUISHER, SAFE AND IN THE GREEN (FULL), PURCHASED NEW IN 11/05 - $20 (QTY of 2)-SOLD (1), (1) LEFT
• INTERCOMP LOW PROFILE BILLET SCALE PAD - *NEW* LOW PROFILE SCALE PAD, NEW, IN THE WRAPPER - RETAILS NEW FOR $400, P.N. 505397 - $200
• CUSTOM TRACK BAR ADJUSTER TOOL, GOOD CONDITION, 1/2" DRIVE, MAC 1/2" DRIVE ON SIDE, MAC 1/2" SWIVEL THE OTHER, 17" TOTAL LENGTH, TIG WELDED SHAFT, NICE TOOL - $10
• SILVERLINE MITYVAC BRAKE BLEEDER KIT - VACUUM KIT - KIT P.N. 4500 IN GOOD WORKING CONDITION WITH CARRYING CASE - $35
• (2) MACHINE/EQUIPMENT LEVELERS - PAIR of MACHINE LEVELERS - 3/4" ACME THREAD WITH JAM NUTS AND POLY FEET - $5/pr
• REAR END TRANSMISSION LUBE HEATER - TRANSFER UNIT - COMPLETE UNIT FROM A CUP TEAM (GINN MOTORSPORTS - MARK MARTIN NAVY CAR) - 12"x12"x16" ALUMINUM CUBE WITH CARRYING HANDLE - CUBE HAS A PLUG-IN HEATER WITH INSULATION BLANKET, OIL TEMPERATURE GAUGE, IMPACT DRIVEN TRANSFER PUMP WITH BRAIDED LINES WITH DISCONNECTS - $195
• 
• LONGACRE GAS CAN WEIGHER SCALING SYSTEM - READS TO 1/10LB - 12"x12" PAD - BATTERY POWERED UNIT IS IN GOOD WORKING CONDITION, PURCHASED FROM A CUP TEAM - HAS REPAIRED CABLE, NEEDS A CHARGER (THEY ARE CHEAP) - THIS UNIT WAS $650 NEW - P.N. 72330 - WORKS ACCURATELY, NO PROBLEMS, NICE USED CONDITION - $295
• JAZ PRODUCTS FUEL FUNNEL - LARGE TRIANGLE FUNNEL, RED IN COLOR, P.N. 55001406 - $12-SOLD
• MESH EQUIPMENT BAG - MEASURES 12"x24" FOR STORING APPAREL or EQUIPMENT - $5
• LARGE CLAM "C" STYLE RIM WIDTH CHECKER - LARGE RIM CHECKER FOR CHECKING RIM WIDTH WITH THE TIRE MOUNTED - MEASURES FROM 2"-12" - $20
• NASCAR FLUIDYNE RACING COOL DOWN UNIT - COMPLETE FLUIDYNE COOL DOWN UNIT FROM A FORMER BUSCH (NATIONWIDE) SERIES TEAM - UNIT IS IN FINE SHAPE, ALL ALUMINUM PANELS IN DECENT SHAPE, PLUGS IN TO STANDARD 110V SERVICE - PUMP, FAN AND HEATER ALL WORK - INCLUDES ALL PICTURED LINES FOR HOOKUP TO THE CAR - ROLLS AROUND THE PITS EASY IN 4 CASTERS - GOOD FOR GT TOURING, NATIONWIDE or ARCA TEAMS - $495
• 
• REBCO ELECTRONIC SCALE SYSTEM - REBCO ELECTRONIC SCALE SET UP, FULL ASSEMBLY WITH CARRYING CASE, P.N. REB110-111 - SYSTEM WAS USED (3) SEASONS BY AN ASPHALT MODIFIED TEAM - SCALES WORK GREAT, ALL PADS ARE WITHIN 1 lb - $725-SOLD 
• 
• HOWE WIDE 5 HUB NUT SOCKET - LARGER HUB NUT SOCKET FOR WIDE 5 NUT - 5x5 AND OTHER COMMON HUB APPLICATIONS - 2 3/8", 6 SIDE, USED ONE SEASON - $15
• LONGACRE TOE-IN GAUGE - EXCELLENT CONDITION - USED ONLY ONCE GAUGE WITH INDICATORS - P.N. LON 79620 - $70
• HOLLEY PLASTIC CARBURETOR TOTE - BLACK IN COLOR, SIMILAR TO P.N. HOW8610 - $20
• QUICK CHANGE INSPECTION PLUG WRENCH - GOOD CONDITION, HAS 1 7/8" SIDE BELL INSPECTION PLUG and 1 3/8" FILL PLUG ENDS - STEEL WRENCH made by JW MOTORSPORTS - $15
• ALUMINUM PAPER TOWEL RACK - SINGLE ROLL TOWEL RACK FOR TRAILER INTERIOR - SIMILAR TO PIT PAL PRODUCTS P.N. 226 - *NEW* NEVER INSTALLED - $15 (QTY of 5)
• ENGINE REMOTE STARTER BUTTON - REMOTE STARTER BUTTON WITH CLAMP-ON LEADS - GOOD WORKING CONDITION - $15
• WEHRS MACHINE WIDE 5 BEARING WASHER/ CLEANER - CUSTOM 2 1/2 GALLON BUCKET WITH PLASTIC BUSHINGS AND WASHERS FOR PLACING BEARINGS TO BE WASHED - DRILL DRIVEN SHAFT ROTATES AROUND MOUNTED BRUSHES ON THE INSIDE WALLS OF THE BUCKET - $25
• HEAVY DUTY SMALL TUBING BENDER - MULTI-FIT BRAKE LINE HAND TUBING BENDER - BENDS 1/8", 3/16" and 1/4" LINES - $5
• ECONOMY CASTER CAMBER GAUGE - POLE POSITION PRODUCTS CASTER CAMBER GAUGE - 3 TABS CLIP TO THE RIM for QUICK READ OUT - CAMBER READS +4deg to -4deg, CASTER READS +12deg to -4deg - LIKE NEW CONDITION - $40-SOLD
• STAINLESS STEEL PRESSURIZED WATER FIRE EXTINGUISHER - FILL WITH WATER AND AIR, PERFECT FOR WASHING OR COOLING THE CAR DOWN AT THE TRACK - GOOD WORKING CONDITION - $50 (QTY of 3)
• CUSTOM PRESSURE TESTER - CONNECTS TO STANDARD "I/M" STYLE AIR HOSE, 0-30psi PRESSURE REGULATOR, ON/OFF "T" VALVE, 2 7/8" DIA, 0-60psi GAUGE, 18" LONG 300psi GOODYEAR CONNECTOR HOSE - $60
• REBCO 2" AIR GAUGE - AIR PRESSURE GAUGE - 0-30psi, DECENT UNIT, WORKS GOOD AND ACCURATE - NO DAMAGE - $20
• LONGACRE 3" AIR PRESSURE GAUGE - GLOW-IIN-THE-DARK AIR PRESSURE GAUGE - 0-60psi, OLDER UNIT, WORKS GOOD AND ACCURATE - NO DAMAGE - $40
• INTERCOMP DIGITAL CASTER/CAMBER GAUGE - INDICATES TO 1/10deg +/- 20deg LIGHTWEIGHT ALUM DESIGN - INCLUDES MAGNETIC ADAPTER - CARRYING CASE INCLUDED - P.N. 100005 - $215-SOLD
• 2000 LB SET-UP TURN PLATES - 1 TON CAPACITY BENDER EQUIPMENT BRAND AUTOMOTIVE TURN PLATES - LW ALUMINUM 30deg +/- RIGHT and LEFT CAPACITY - 11 1/2" ROLL OUT BASE PAD - USED BY THE #5 CRAFTSMAN TRUCK TEAM - $200-SOLD

OIL SYSTEM

• MISC. REMOTE ADAPTERS, CALL FOR SPECIFICS
• 28 TOOTH OIL PUMP COG PULLEY, 28 TOOTH COG PULLEY, NEW, NEVER INSTALLED, .625" INSIDE DIAMETER - $25
• VALVE TRAIN ROCKER ARM ARM MOROSO OIL DEFLECTOR SHIELDS - $19/PR
• SBC STEEL OIL PUMP DRIVE - GOOD CONDITION, NO PROBLEMS - $5
• DRY SUMP SYSTEM OIL SCAVENGER - -12AN OUTLET, (3) -12AN INLETS - ALUMINUM RAIL STYLE, GOOD USED CONDITION - $30
• PETERSON DRY SUMP TANK CENTER BAFFLE, UNDAMAGED CENTER BAFFLE FROM A CRAFTSMAN TRUCK, FITS 3 GALLON PETERSON TANKS - $20
• (2) PETERSON DRY SUMP TANK TOP SECTION, UNDAMAGED CUSTOM TOP SECTION FROM A CRAFTSMAN TRUCK, (2) -16AN INLETS, 2-1/4" BREATHER HOLE TOP, FITS 3 GALLON PETERSON TANKS - $25
• MELLING HIGH VOLUME OIL PUMP - *NEW* IN THE BOX, P.N. M-55HV - $39
• MODINE OIL COOLER - 2"x6"x15", -12AN IN/OUT, LIKE NEW SHAPE, HARD TO TELL IT WAS EVEN INSTALLED, PRESSURE CHECKED GOOD - MODINE P.N. 1B111C - $150 (QTY of 2)
• WEAVER BROS 4 STAGE OIL PUMP - 4 STAGE BELT DRIVEN OIL PUMP - PUMP WAS CARRIED AS A SPARE FOR AN ARCA TEAM - SPINS NICE, PUMP VANES LOOK GOOD - $425-SOLD
• 
• RICHARDSON RACING PRODUCTS DRY SUMP OIL SCAVENGE MANIFOLD, -16AN MAIN, (3) F-12AN INLETS - $25
• MODINE OIL COOLER, 2 1/2" X 6" X 15", -16AN IN/OUT, VERY GOOD SHAPE, PRESSURE CHECKED GOOD, MODINE PART NO. 1B111C - $125 (QTY of 2)-SOLD (1), (1) LEFT
• SBC STEEL OIL PUMP DRIVE, GOOD CONDITION, NO PROBLEMS, - $5
• 32 TOOTH GILMER DRIVE OIL PUMP COG PULLEY - 32 TOOTH COG PULLEY - NEW, NEVER INSTALLED, SHELF WORN, .625" INSIDE DIAMETER - $20
• PETERSON FLUID SYSTEMS SCAVENGER RETURN MANIFOLD. *NEW*- SHELF WORN ONLY. (2) -12AN INLET AND -16AN OUTLET FOR STAGE 3 PUMP - SIMILAR TO PART NO. PTR10-0002, EXCEPT (2) -12AN INLETS ARE FEMALE (OVER $125 NEW). - NOW ONLY $65
• STOCK STYLE ADAPTER FOR REMOTE OIL FILTER - $15
• 28 TOOTH OIL PUMP COG PULLEY, 28-TOOTH COG PULLEY, NEW, NEVER INSTALLED, .625" INSIDE DIAMETER - $25
• MELLING SBC HI-VOLUME OIL PUMP and PICK-UP *NEW* -  IN THE BOXES - PUMP P.N. 10555 WITH BOLT-IN PICK-UP - P.N. 12557 - $50
• REAR END / TRANSMISSION COOLER PUMP - HIGH PERFORMANCE PUMP W/INTEGRAL COOLING FAN - 3/8" NPT FITTINGS IN/OUT - FLOWS 1-2 GALLONS/MINUTE AT 60psi - RUNS ON 12 VOLT POWER - 8 amps MAX - COLEMAN P.N. 17-522 (TILTON P.N. 40-524) - RUNS GREAT - $95-SOLD
• LARGE SETRAB ALUMINUM OIL COOLER - MEASURES 25 1/4" x 17 3/4" x 1 1/4" THICK - FITS IN FRONT of MANY STYLES of C&R RADIATORS -12AN FITTINGS IN/OUT - SETRAB P.N. 52-09370-01 - REMOVED FROM A CUP CAR - GOOD UNDAMAGED USED CONDITION - $125 (QTY of 2)
• 5 GALLON DRY SUMP TANK - MODIFIED PETERSON ALUMINUM TANK - COMPLETE WITH BRACKETS - MEASURES 24" TALL (PLUS NECK) x 9" DIA - MINOR CUSTOM MODIFICATIONS - NO DENTS - VERY GOOD CONDITION - $165
• 5 GALLON DRY SUMP TANK - MODIFIED OVAL CRAFT ALUMINUM TANK - COMPLETE WITH BRACKETS - MEASURES 25" TALL TOTAL x 10" DIA - MINOR CUSTOM MODIFICATIONS - NO DENTS (2) 2" WIDE HEATER BANDS - VERY GOOD CONDITION - $165
• DRY SUMP TANK INSULATION COVERS - SET of HEINTZ PERFORMANCE DRY SUMP TANK INSULATION BLANKET COVERS - ASSEMBLE WITH VELCRO - COMFORTABLY FITS 20"-22" TALL x 9"-10" DIA - 5 GALLON TANKS - EXCELLENT CONDITION COVER - $25 (QTY of 3)-SOLD (1), (2) LEFT
• DRY SUMP TANK INSULATION COVERS - SET of HEINTZ PERFORMANCE DRY SUMP TANK INSULATION BLANKET COVERS - ASSEMBLE WITH VELCRO - COMFORTABLY FITS 22"-24" TALL x 9"-10" DIA - 5 GALLON TANKS - EXCELLENT CONDITION COVER - $25 (QTY of 3)
• DRY SUMP TANK INSULATION COVERS - SET of HEINTZ PERFORMANCE DRY SUMP TANK INSULATION BLANKET COVERS - ASSEMBLE WITH VELCRO - COMFORTABLY FITS 24"-26" TALL x 9"-10" DIA - 5 GALLON TANKS - EXCELLENT CONDITION COVER - $25 (QTY of 2)
• DRY SUMP TANK INSULATION COVERS - SET of HEINTZ PERFORMANCE DRY SUMP TANK INSULATION BLANKET COVERS - ASSEMBLE WITH VELCRO - COMFORTABLY FITS 26"-28" TALL x 9"-10" DIA - 5 GALLON TANKS - EXCELLENT CONDITION COVER - $25 (QTY of 2)
• DRY SUMP TANK INSULATION TOP COVER - MISC HEAT SHIELDING - DRY SUMP TANK INSULATION BLANKET COVER - TOP ONLY - ASSEMBLE WITH VELCRO - 9"-10" DIA - 5 GALLON TANKS - VERY GOOD CONDITION - COVER TOP ONLY - CAN ALSO BE USED TO TRIM AND USE IN OTHER HEAT SCREEN APPLICATION AREAS - $5 (QTY of 4)
• DRY SUMP TANK INSULATION BOTTOM COVER - MISC HEAT SHIELDING - DRY SUMP TANK INSULATION BLANKET COVER - BOTTOM ONLY - ASSEMBLE WITH VELCRO - 9"-10" DIA - 5 GALLON TANKS - VERY GOOD CONDITION - COVER BOTTOM ONLY - CAN ALSO BE USED TO TRIM AND USE IN OTHER HEAT SCREEN APPLICATION AREAS - $5
• WEAVER BROS DRY SUMP PULLEY - 18 TOOTH COG PULLEY, STD BORE - P.N. 1135-18L-100 IN DECENT USED CONDITION - $15
• DRY SUMP COG PULLEY - WEAVER BROTHERS DRY SUMP COG PULLEY - P.N. 1213, 30 TOOTH PULLEY - DECENT USED SHAPE - $25
• DRY SUMP SYSTEM PRESSURE INDICATOR BLOCK - "DIAMOND" BRAND P.N. 02-6730, -12AN IN/OUT WITH A FITTING SEAT ON TOP - $25
• SCAVENGER RETURN MANIFOLD for DRY SUMP OIL SYSTEM - EXCELLENT CONDITION (3) 3/4" P INLET and 1" P OUTLET FOR STAGE 4 PUMP - $25
• OIL FILTER SANDWICH ADAPTOR - UNKNOWN BRAND - DESIGNED for WHERE A REMOTE FILTER IS USED - NICE SHAPE, A COUPLE of MINOR NICKS, (2) 1/2"P INLET/OUTLET - TEMPERATURE BYPASS - $20
• COLEMAN OIL FILTER SANDWICH ADAPTOR - DESIGNED FOR WHERE A REMOTE FILTER IS USED - NICE SHAPE, A COUPLE of MINOR NICKS, (2) 1/2" P INLET/OUTLET P.N. COL 300-000 - $20-SOLD
• LONG COOLING OIL COOLER - MEASURES 11"x6"x1 1/2" LIGHTWEIGHT ALUMINUM CONSTRUCTION -8AN FITTINGS INSTALLED - GOOD USED UNIT W/MOUNT BRACKET - $40
• TILTON DIFFERENTIAL / TRANSMISSION COOLER PUMP - HIGH PERFORMANCE PUMP W/INTEGRAL COOLING FAN - 3/8" NPT FITTINGS IN/OUT - FLOWS 1-2 GALLONS/MINUTE AT 60psi - RUNS ON 12 VOLT POWER - 8amps MAX - TILTON 40-524 - RUNS GREAT - $95 (QTY of 3)-SOLD (2), (1) LEFT
• SALDANA RACING PRODUCTS STYLE SPRINT CAR DRY SUMP TANK - MEASURES 6"x25" - CUSTOM VERSION of P.N. OT-624-CC - SLIP-ON 3/4" TUBE TOWARD THE TOP W/24" BRAIDED LINE W/-16 END -12AN M BUNG TOWARD THE BOTTOM W/MOUNTING BRACKET - NICE USED TANK, NO DAMAGE - $155 (THIS TANK ALSO LISTED IN "SPRINT CAR ITEMS")
• BR MOTORSPORTS ECONOMY STYLE SPRINT CAR DRY SUMP TANK - MEASURES 6"x22" - (2) -12AN M BUNG TOWARD THE TOP - (1) -12AN M BUNG TOWARD THE BOTTOM - NICE USED TANK, NO DAMAGE - $125
• FINNED ALUMINUM LINEAR COOLING LINE - FINNED ALUMINUM COOLING LINE WITH "T" SLOT MOUNTING - 3/4" PIPE TAPPED EACH SIDE - 3' LENGTH BENT AT 15deg 2/3 WAY ACROSS - $15
• FINNED ALUMINUM LINEAR COOLING LINE - FINNED ALUMINUM COOLING LINE WITH "T" SLOT MOUNTING - 3/4" PIPE TAPPED EACH SIDE - 3' LENGTH  - $20
• FINNED ALUMINUM LINEAR COOLING LINE - FINNED ALUMINUM COOLING LINE WITH "T" SLOT MOUNTING - 3/4" PIPE TAPPED EACH SIDE - 2' LENGTH  - $15
• OIL FILTER BY-PASS PLATE - BILLET ALUMINUM PLATE BOLTS TO BLOCK WITH 1/2" and 3/4" PIPE THREADED PROVISIONS - $15-SOLD
• MOROSO INLINE SCAVENGER RACING OIL FILTER - -8AN IN/OUT - 4" BODY - GOOD CONDITION - STAINLESS PAN SCREEN FILTER SCAVENGE FOR DRY SUMP SYSTEMS - $25-SOLD
• SCAVENGE RETURN MANIFOLD for DRY SUMP OIL SYSTEM - GOOD CONDITION (3) -12AN M INLETS "Y" INTO -16AN M OUTLET - $25
• PETERSON DRY SUMP PUMP MOUNTING BRACKETS - PAIR of GOOD CONDITION 1/2" THICK ALUMINUM PUMP MOUNTING BRACKETS - $10-SOLD
• PETERSON FLUID PULLEY FLANGE/GUARD - GOOD CONDITION FLANGE TYPICALLY FOR COG PULLEYS - P.N. 05-1640 - $10
• ACCUSUMP OIL ACCUMULATOR - 3 QT, COMPLETE, HOLDS GOOD PRESSURE WITH LIQUID FILLED GAUGE, MANUAL VALVE OPERATION - REMOVED FROM A RUNNING CAR, INTERNALLY INSPECTED AND TESTED - $145-SOLD
• REAR END / TRANSMISSION COOLER PUMP - HIGH PERFORMANCE PUMP W/INTEGRAL COOLING FAN - 3/8" NPT FITTINGS IN/OUT - FLOWS 1-2 GALLONS/MINUTE AT 60psi - RUNS ON 12 VOLT POWER - 8 amps MAX - COLEMAN P.N. 17-522 (TILTON P.N. 40-524) - RUNS GREAT - $95 (QTY of 2)-BOTH SOLD
• PETERSON 3 GALLON DRY SUMP TANK - PETERSON FLUID SYSTEMS ALUMINUM TANK COMPLETE WITH STRAPS/BRACKET/FITTINGS and CAP - MEASURES 16 1/2" TALL x 9" DIAMETER - 1 1/2" RAISED BREATHER ADDED - EXCELLENT FRESHLY CLEANED CONDITION - $225-SOLD
• EARL'S OIL COOLER - MEASURES 9"W x 5"H x 2"THICK - LIGHT WEIGHT ALUMINUM CONSTRUCTION -10AN M FITTINGS INSTALLED - GOOD USED UNIT - $75
• LARGE SETRAB ALUMINUM OIL COOLER - MEASURES 27" WIDE x 21 1/2" TALL x 1 1/4" THICK - FITS IN FRONT of MANY STYLES of C&R RADIATORS -12AN FITTINGS IN/OUT (both RT side) - Modified SETRAB P.N. 52-09370-01 REMOVED FROM A CUP CAR - GOOD UNDAMAGED USED CONDITION - $95
• 
• EARL'S STYLE OIL COOLER - MEASURES 9"W x 5"H x 2" THICK - LIGHT WEIGHT CONSTRUCTION -6AN M FITTINGS INSTALLED - (2) 36" LONG STAINLESS STEEL BRAIDED LINES INSTALLED WITH 90deg ELBOWS - ONE LINE HAS A TEMPERATURE SENSOR PROVISION ALUMINUM BLOCK PLUMBED INTO IT - VERY NICE LINES - VERY GOOD USED UNIT - $95-SOLD
• STOCK CAR PRODUCTS SINGLE STAGE REAR END PUMP *NEW* - NEW BARE PUMP ASSEMBLY P.N. SCP 101 - .800" WIDE SINGLE STAGE REAR END COOLER PUMP W/-8AN FITTINGS - REMOVED FROM THE SPARE PARTS SHELF AT A TOP CRAFTSMAN TRUCK TEAM (#5 TRUCK) - NEVER INSTALLED - $175
• 
• PETERSON 4 GALLON LATE MODEL DRY SUMP TANK - semi CUSTOM VERSION of P.N. 08-0814-DB - COMPLETE WITH STRAP/BRACKETS/FITTINGS and CAP - WITH LAY DOWN STYLE INTEGRAL OIL FILTER (needs screen element) (Plumbs to filter with a Wiggins clamp) - MEASURES 20" TALL x 9" DIAMETER - VERY GOOD CONDITION - DECENT BOTTOM - $245
• 
• PETERSON MODIFIED 5 GALLON DRY SUMP TANK - MODIFIED PETERSON ALUMINUM TANK - COMPLETE WITH BRACKETS - MEASURES 22" TALL (PLUS NECK) x 9" DIA - MINOR CUSTOM MODIFICATIONS - NO DENTS - VERY GOOD CONDITION - $125
• REAR END / TRANSMISSION LUBE HEATER - TRANSFER UNIT - COMPLETE UNIT FROM A CUP TEAM (BILL DAVIS #22 CAT CAR) - 10"x10"x12" ALUMINUM CUBE WITH CARRYING HANDLE - CUBE HAS DUAL PLUG-IN HEATERS WITH OIL TEMPERATURE GAUGE, -20AN FITTING ON TOP FOR EASY FILLING AND POURING - $115
• C&R RADIATOR STACKED UNIVERSAL ENGINE OIL COOLER - *NEW* - ALUMINUM OIL COOLER - FITS IN FRONT OR BEHIND OVERALL MEASUREMENTS of 26"x4"x4" W/4" CHANNEL - 24" CORE -12AN IN/OUT FITTINGS - $250
• FLUIDYNE STACKED UNIVERSAL ENGINE OIL COOLER - *NEW* - ALUMINUM OIL COOLER - FITS IN FRONT OR BEHIND OVERALL MEASUREMENTS of 28"x3 1/2"x3 1/2" W/4" CHANNEL - 24" CORE -12AN IN/OUT FITTINGS - $250

          FILTERS and FILTER MOUNTS

• REMOTE OIL FILTER CANISTER MOUNT - $20
• MOROSO  INLINE SCAVENGER RACING OIL FILTER, -8AN IN/OUT, GOOD CONDITION, STAINLESS SCREEN SCAVENGE FOR DRY SUMP SYSTEM - $25
• MOROSO SCAVENGER IN LINE OIL FILTER - -10AN IN/OUT STAINLESS SCREEN IN-LINE FILTER, P.N. MOR 23850 - $35 (QTY of 2)-REDUCED to $25-SOLD (1), (1) LEFT
• PETERSON FLUID SYSTEMS INLINE OIL FILTER - -10AN FILTER, 60 MICRON ELEMENT, 7" LONG, P.N. PTR 09-0457 - $150
• PETERSON FLUID SYSTEMS INLINE OIL FILTER - -12AN in/out FILTER, 60 MICRON STAINLESS ELEMENT, 7" LONG, with 1 1/2" ROUND MOUNTING BRACKET, P.N. PTR09-0457, SHOWING WEAR, GOOD USABLE UNIT - $65
• OBERG STYLE PARKER RACOR 600 RACING OIL FILTER, 60 MICRON FILTER, 6" SQUARE FILTER, HEAVY DUTY 600 SERIES, INCLUDES 1" ROUND MOUNTING BRACKET - $110-SOLD
• OBERG 6" TATTLE TALE OIL FILTER - VINTAGE STYLE 6" TATTLE TALE OIL FILTER WITH FILTER SCREEN, GREAT WORKING CONDITION WITH NO DAMAGE - $75 ( QTY of 2)
• OBERG 6" TATTLE TALE OIL FILTER - VINTAGE STYLE 6" TATTLE TALE OIL FILTER WITH FILTER SCREEN, GREAT WORKING CONDITION WITH NO DAMAGE, DUAL SANDWICH STYLE - $75
• REMOTE CANISTER STYLE FILTER BRACKET - USES STANDARD SBC FILTER WITH IN/OUT FITTINGS - CAN BE USED FOR ENGINE or TRANS APPLICATIONS - $20-SOLD
• (3) MOROSO INLINE SCAVENGER RACING OIL FILTER, -12AN IN/OUT, GOOD CONDITION, STAINLESS SCREEN SCAVENGE FOR DRY SUMP SYSTEM - $35/EA-SOLD (1), (2) LEFT
• PETERSON FLUID SYSTEMS INLINE SCAVENGER FILTER - -10AN FILTER, SCAVENGE SCREEN, 3 3/4" LONG, P.N. PTR09-0402 - $35-SOLD
• FRAM HP6 FILTER BRACKET, VERY GOOD CONDITION BRACKET, USES -12AN AEROQUIP O-RING FITTINGS, PART NO. HPK600 - $35
• MOROSO STYLE REMOTE FILTER BRACKET, VERY GOOD CONDITION BRACKET, USES SMALLER FORD AND CHRYSLER SPIN ON FILTERS, 3" DIA SEAT, VERY SIMILIAR TO PART NO. MOR23700 - $20-SOLD
• OBERG STYLE RACOR RACING OIL FILTER - 60 MICRON FILTER, 6" SQUARE FILTER - RACOR BRAND, SIMILAR TO OBERG P.N. 6001B - HEAVY DUTY 600 SERIES - EXCELLENT CONDITION - $95-SOLD
• FRAM HP6 FILTER BRACKET - VERY GOOD CONDITION BRACKET WITH -12AN AEROQUIP O-RING FITTINGS - P.N. HPK600 - $40
• MOROSO STYLE OIL FILTER BY-PASS - ALUMINUM BYPASS IN GOOD CONDITION WITH 1/2" P IN/OUT - SIMILAR TO MOROSO P.N. 23770 - $15
• MOROSO STYLE DUAL REMOTE OIL FILTER MOUNT - ALUMINUM MOUNT IN GOOD CONDITION WITH 1/2" P IN/OUT - $15-SOLD
• MOROSO STYLE SCAVENGER IN LINE OIL FILTER - -8AN IN/OUT, STAINLESS SCREEN IN-LINE FILTER - SIMILAR TO P.N. MOR23870 - BODY MEASURES ONLY 2 3/4" - $15-SOLD
• FRAM HP6 FILTER BRACKET *NEW* - NEW BRACKET WITH -12AN AEROQUIP O-RING FITTINGS - P.N. HPK600 - SHELF WORN ONLY - $40
• MOROSO REMOTE FILTER MOUNT BRACKET - VERY GOOD CONDITION BRACKET USES SMALLER FORD AND CHRYSLER SPIN ON FILTERS - 3" DIA SEAT - P.N. MOR23710 - INLET-LEFT, OUTLET-RIGHT - $25
• MOROSO REMOTE FILTER MOUNT BRACKET - VERY GOOD CONDITION USES SMALLER FORD AND CHRYSLER SPIN ON FILTERS - 3" DIA SEAT - P.N. MOR23710 - INLET-LEFT, OUTLET-RIGHT - INCLUDES INSTALLED -12AN M FITTINGS - $30
• MOROSO STYLE REMOTE FILTER MOUNT BRACKET - VERY GOOD CONDITION BRACKET - USES CHEVROLET-TYPE SPIN ON FILTERS - SIMILAR TO P.N. MOR23760 - INLET-LEFT, OUTLET-RIGHT - INCLUDES (1) -12AN STRAIGHT AEROQUIP FITTING - $25
• OBERG 6" TATTLE TALE OIL FILTER - VINTAGE STYLE 6" TATTLE TALE OIL FILTER WITH FILTER SCREEN, GREAT WORKING CONDITION WITH NO DAMAGE - $65
• OBERG STYLE RACOR RACING OIL FILTER - 60 MICRON FILTER, 6" SQUARE FILTER - RACOR BRAND, SIMILAR TO OBERG P.N. 6001B - HEAVY DUTY 600 SERIES - EXCELLENT CONDITION - $95
• PETERSON FLUID SYSTEMS INLINE OIL FILTER - SEMI-CUSTOMED -10AN M ONE END and -10AN O-RING STYLE OTHER END - STAINLESS FILTER ELEMENT - 4 1/2" LONG BODY - similar to P.N. PTR09-0402 - $35
• FRAM HP6 FILTER BRACKET - VERY GOOD CONDITION BRACKET WITH (2) MALE -12AN AEROQUIP O-RING FITTINGS - P.N. HPK600 - $35
• RACING REMOTE OIL FILTER BRACKET - VERY GOOD CONDITION BRACKET from a CUP TEAM WITH (2) MALE -12AN INLET/OUTLETS 1 1/8"x 16 THREAD - ACCEPTS FRAM FILTER PH3519-A or WIX FILTER 51268R - $35 (QTY of 2)
• MOROSO REMOTE OIL FILTER MOUNT - MOUNT IS IN GOOD CONDITION WITH -12AN ALUMINUM FITTINGS INLET AND OUTLET - MOROSO P.N. 23750 - $25-SOLD
• PETERSON FLUID SYSTEMS INLINE SCAVENGER FILTER - -8AN FILTER, SCAVENGER SCREEN, 2 3/4" LONG - $35
• PETERSON FLUID SYSTEMS 600 SERIES INLINE FILTER - -10AN FITTINGS IN/OUT FILTER, W/STAINLESS ELEMENT, BODY IS 4" LONG - $35 (QTY of 2)-BOTH SOLD
• PETERSON FLUID SYSTEMS INLINE SCAVENGER FILTER - (MODIFIED) -10AN INVERTED FLARE IN/ -10AN M OUT FILTER, SCAVENGE SCREEN, 3 3/4" LONG - similar to P.N. PTR09-0402 - $35
• PETERSON FLUID SYSTEMS 600 SERIES INLINE FILTER - MODIFIED W/HEATER ELEMENT - -8AN FITTINGS IN/OUT FILTER, INLET ON THE TOP SIDE/OUTLET OUT THE END CAP - BODY is 4" LONG - HEATER ELEMENT IS INSTALLED FROM INLET SIDE - $35 (QTY of 2)
• PETERSON STYLE INLINE FILTER - ANODIZING BLACK IN COLOR - -8AN FITTINGS IN/OUT FILTER W/STAINLESS ELEMENT, BODY is 7 3/4" LONG, 2" O.D. w/MOUNTING BRACKET for a FLAT PANEL - $40
• FRAM HP6 FILTER BRACKET, VERY GOOD CONDITION BRACKET with -12AN and -16AN AEROQUIP O-RING FITTINGS, PART NO. HPK600 - $35
• MOROSO STYLE "MINI" INLINE SCAVENGER RACING OIL FILTER -8AN IN/OUT, 2 3/4" BODY - GOOD CONDITION - STAINLESS PAN SCREEN FILTER SCAVENGE FOR DRY SUMP SYSTEMS - $20 (QTY of 2)-SOLD (1), (1) LEFT
• PETERSON FLUID SYSTEMS 400 SERIES IN-LINE FILTER -16AN FITTINGS IN/OUT FILTER - 9" TOTAL LENGTH, 2 1/4" O.D. - $40
• PETERSON FLUID SYSTEMS 400 SERIES IN-LINE FILTER W/INLET ACCESSORY PORT -16AN FITTINGS IN/OUT FILTER, W/-10AN INLET ACCESSORY PORT W/STAINLESS ELEMENT - 9" TOTAL LENGTH, 2 1/4" O.D. - $50
• DUAL REMOTE OIL FILTER BRACKET - GOOD CONDITION - STANDARD CHEVY SPIN ON REMOTE LOCATION - DUAL FILTER MOUNT BRACKET - ALUMINUM CONSTRUCTION KEITH BLACK CASTING NUMBER of SP350 D (USES NAPA 1515 STYLE FILTERS) - $25-SOLD
• CUSTOM REMOTE OIL FILTER MOUNT HOUSING - FITS LARGE SPIN ON HP6 FILTER - (2) INLETS ON THE TOP FOR 1/2"P, (1) INLET ON TOP FOR -12AN AND (1) INLET ON THE SIDE FOR -12AN - $25
• MOROSO REMOTE OIL FILTER MOUNT BRACKET - VERY GOOD CONDITION BRACKET USES SMALLER FORD AND CHRYSLER SPIN ON FILTERS -3" DIA SEAT - P.N. MOR 23710 - INLET-LEFT, OUTLET-RIGHT - $25
• SCAVENGER RETURN MANIFOLD for DRY SUMP OIL SYSTEM - GOOD CONDITION - (2) -16AN M INLETS "Y" INTO -16AN F OUTLET - $25
• PETERSON FLUID SYSTEMS SCAVENGER RETURN MANIFOLD - LIKE NEW CONDITION - (3) -12AN FEMALE INLET AND -16AN MALE OUTLET - FOR STAGE 4 PUMP - SIMILAR TO P.N. 10-0004, EXCEPT (3) -12AN INLETS ARE FEMALE (OVER $125 NEW) - NOW $65
• MOROSO REMOTE OIL FILTER MOUNT - MOUNT IN GOOD CONDITION WITH 1/2" PIPE INLET AND OUTLET - MOROSO P.N. 23750 - $25
• REMOTE OIL FILTER BRACKET - GOOD CONDITION - STANDARD CHEVY SPIN ON REMOTE LOCATION - FILTER MOUNT BRACKET - ALUMINUM CONSTRUCTION CASTING NUMBER of 1022 (appears to USE NARROW DIA SPIN ON STYLE FILTERS W/ 13/16" THREADS) - $25

     PANS

• CHAMP PAN SBC OIL PAN, STANDARD PAN, PART NO. CP-100, WITH KICK-OUT LEFT SIDE DIPSTICK, FITS '86 AND OLDER 2-PC CRANK, NO DAMAGE, NICE CLAIMER PAN - $100
• CHAMP PAN SBC OIL PAN - STANDARD PAN, P.N. CP-100, WITH KICK-OUT LEFT SIDE DIPSTICK, FITS '86 and OLDER 2 PC CRANK - 7" DEEP WITH TRAP DOORS AND WINDAGE TRAY - NO DAMAGE EXCEPT LIGHT SURFACE RUST IN THE VERY BOTTOM EDGE FROM SITTING, NICE CLAIMER PAN - INCLUDES PICK-UP - $100
• SBC CLAIMER STYLE CIRCLE TRACK OIL PAN - PAN IS FOR LEFT SIDE DIPSTICK, '80 and OLDER SBC BLOCK, GOOD CONDITION PAN, 2 TRAP DOORS, NO WELDS OR DENTS - 7 1/2" DEEP - $50-SOLD
• CHAMP PANS - SBC "STOCK APPEARING" CIRCLE TRACK OIL PAN - PAN IS FOR LEFT SIDE DIPSTICK, '80 and OLDER SBC BLOCK, CHAMP PANS P.N. CP40, GOOD CONDITION PAN, 3 TRAP DOORS WITH BUILT IN WINDAGE TRAY, 1" INSPECTION PLUG ADDED - INCLUDES STOCK STYLE PICK-UP - NO REPAIR WELDS OR DENTS - $65
• KEVCO CHEVROLET CIRCLE TRACK OIL PAN - SBC - RH DIPSTICK, SBC, P.N. KEV1090 - *NEW* INSTALLED BUT NEVER RAN - 8 QUART CAPACITY PAN FACTORY RED - 7 1/4" DEEP, 12 1/2" LONG, 11" WIDE SUMP - THIS PAN HAS 3 GATES, A SCRAPER AND A REMOVABLE TRAY - $85
• SBC CIRCLE TRACK OIL PAN - OLDER NARROWER VERSION of CHAMP PAN P.N. CP 100 - PAN IS 12" WIDE, 7" DEEP, 7QT PAN - HAS TRAP DOORS AND SCRAPERS - INCLUDES CP106SB PICK-UP - $100-SOLD
• SBC CLAIMER STYLE CIRCLE TRACK OIL PAN - PAN IS FOR LEFT SIDE DIPSTICK, '80 and OLDER SBC BLOCK, GOOD CONDITION PAN, 2 TRAP DOORS, NO WELDS, ONLY MINOR DENTS - INCLUDES PICK-UP - 7" DEEP - 10"x10" BOTTOM - $55

SEATS/SAFETY AND ACCESSORIES    

• ULTRASHIELD ALUMINUM RACING SEAT - ECONOMY LAYBACK SEAT - 17" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED VINYL COVER IS BLACK IN COLOR, VINYL SIDES WITH CLOTH CENTER - COMPLETE SEAT IN OVERALL GOOD USED CONDITION - MINOR AGE NICKS, NO MAJOR RIPS OR TEARS - GOOD QUALITY ECONOMY SEAT - $90-SOLD 
• KIRKEY ALUMINUM PRO SERIES RACING SEAT - PRO SERIES SEAT - 14 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLUE IN COLOR, CLOTH COVER WITH VINYL SIDES, COMPLETE SEAT IN OVERALL GOOD USED CONDITION - MAJORITY OF THE SEAT IS NICE, EXCEPT THE HIP AREA HAS SOME DAMAGE FROM THE COVER PEELING BACK WITH A COUPLE RIPS ACROSS THE HIP SUPPORTS - GOOD QUALITY INTERMEDIATE SEAT - $135-SOLD
• ULTRA SHIELD ALUMINUM RACING SEAT - ECONOMY LAYBACK SEAT 16 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK. USED COVER IS BLACK IN COLOR, CLOTH COVER WITH VINYL SIDES, COMPLETE SEAT IN OVERALL VERY GOOD USED CONDITION WITH ONLY A COUPLE SMALL WELDING SPLATTER HOLES IN THE BASE OF THE COVER, NO OTHER RIPS or TEARS - GOOD QUALITY ECONOMY SEAT - $75
• KIRKEY ALUMINUM RACING SEAT - STANDARD LAYBACK SEAT - 18" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, VINYL COVER WITH VINYL SIDES, COMPLETE SEAT IN OVERALL EXCELLENT USED CONDITION WITH NO RIPS or TEARS - GOOD QUALITY STANDARD SEAT - $95
• KIRKEY SPRINT ALUMINUM RACING SEAT - STANDARD ORIGINAL STYLE SPRINT CIRCLE TRACK SEAT, 15" BASE FRONT, 14" TAPER TO THE BACK - 10deg, STANDARD SIZE SEAT - NO COVER PADS - NICE FRAMED SEAT - RUMORED TO BE A MID 90s KINSER SEAT - $115-SOLD
• KIRKEY ALUMINUM PRO SERIES RACING SEAT W/SUPPORTS - PRO SERIES SEAT - 15" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, CLOTH WITH VINYL SIDES - COMPLETE SEAT IN OVERALL DECENT USED CONDITION - IT IS SHOWING IT'S AGE WITH SMALL RIPS and TEARS and FADED A BIT - SEAT HAS BOTH RIGHT AND LEFT BUTLER HEAD SUPPORTS, BOTH RIGHT AND LEFT SHOULDER SUPPORTS AND BOTH RIGHT AND LEFT BUTLER LEG SUPPORTS - GOOD USED INTERMEDIATE SEAT - $140-SOLD
• KIRKEY ALUMINUM SPORTSMAN RACING SEAT - SPORTSMAN SERIES SEAT - 19" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, CLOTH COVER WITH VINYL SIDES - COMPLETE SEAT IN OVERALL DECENT USED CONDITION - (2) SMALL 2" RIPS, (1) BY THE LEFT ARM, (1) BY THE LEFT LEG AND THE THREE SNAPS ALONG THE BOTTOM ARE MISSING - SEAT ALSO HAS RIGHT AND LEFT LEG SUPPORTS - DECENT QUALITY ECONOMY SEAT WITH LEG OPTIONS - $120
• KIRKEY LIGHT WEIGHT SPRINT STYLE ALUMINUM RACING SEAT - 14 1/2" BASE FRONT, STANDARD SIZE SEAT, 10deg LAYBACK - NO CLOTH COVER, BUT HAS A RIGHT SIDE HEAD SUPPORT INSTALLED WITH BLACK COVER - OLDER DESIGN FRAME SHOWING WEAR AND MINOR MODS - FAIR/O.K. CONDITION LIGHT WEIGHT 360 SPRINT SEAT - PRICED CHEAP AT - $75-SOLD
• KIRKEY ALUMINUM PRO SERIES RACING SEAT - PRO SERIES SEAT - 15 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, CLOTH COVER WITH VINYL SIDES COMPLETE SEAT IN OVERALL FAIR USED CONDITION - SEAT FRAME IS NICE, COVER IS FAIR WITH SOME WELDING SPLATTER MARKS AND A 2" HOLE BURNED IN THE SEAT BASE OF THE COVER - NO RIPS OR TEARS IN THE COVER, JUST BURN HOLES - OVERALL DECENT QUALITY PRO SERIES SEAT - $115-SOLD
• OVAL CRAFT DELUXE ALUMINUM RACING SEAT - DELUXE CUSTOM 17" BASE FRONT, STANDARD SIZE SEAT - DOUBLE WALL ALUMINUM, EXTRA DEEP LOWER BODY BASE - 20deg LAYBACK - COVER IS BLACK IN COLOR, CLOTH WITH VINYL SIDES - SEAT WAS MOCKED UP IN THE CAR BUT NEVER RACED - OVERALL EXCELLENT CONDITION SEAT - GOOD QUALITY INTERMEDIATE SEAT - $175-SOLD 
• KIRKEY ALUMINUM SPORTSMAN RACING SEAT - SPORTSMAN SERIES SEAT - 15 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLUE IN COLOR - CLOTH COVER WITH VINYL SIDES COMPLETE SEAT IN OVERALL DECENT USED CONDITION - NO RIPS or TEARS, BUT THE COVER DOES HAVE A FEW MINOR WELDING BURN HOLES IN IT - DECENT QUALITY ECONOMY SEAT - $100-SOLD
• ISP DELUXE PRO FULL CONTAINMENT ALUMINUM RACING SEAT - BUSCH (NATIONWIDE) SERIES CAR TAKE-OUT - 18 1/2" FRONT WIDTH WITH A STANDARD MID-BODY TAPERING TO 17 1/2" REAR WIDTH - COMPLETE HALO WITH SHOULDER SUPPORTS - CLOTH IS BLACK IN COLOR, VINYL SIDES, CLOTH CENTER COMPLETE WITH FRAME AND COVER - VERY GOOD USED CONDITION COVER, NO RIPS or TEARS - DOUBLE WALL CONSTRUCTION, ISP REINFORCED THROUGHOUT - VERY NICE SEAT - $775
• BUTLER DELUXE PRO/ ADVANTAGE FULL CONTAINMENT ALUMINUM RACING SEAT - CUP SERIES CAR TAKE-OUT, FORMER HERMIE SADLER CUP SEAT - 17" FRONT WIDTH WITH A STANDARD MID-BODY TAPERING TO 16 1/2" REAR WIDTH - COMPLETE HALO WITH SHOULDER SUPPORTS - CLOTH IS BLACK, VINYL SIDES, CLOTH CENTER COMPLETE WITH FRAME AND COVER - VERY GOOD USED CONDITION COVER, NO RIPS or TEARS - DOUBLE WALL CONSTRUCTION, BUTLER REINFORCED THROUGHOUT - $750-SOLD
• BUTLER BUILT ALUMINUM RACING SEAT - 16" BASE FRONT, STANDARD SIZE SEAT, SINGLE WALL ALUMINUM, STANDARD BODY BASE - 20deg LAYBACK - USED COVER IS BLACK IN COLOR, CLOTH WITH VINYL SIDES, SOME MINOR AGE NICKS AND A COUPLE MINOR AGE TEARS, OTHERWISE OVERALL DECENT CONDITION SEAT THAT IS STARTING TO SHOW IT'S AGE - INCLUDES INSTALLED RIGHT AND LEFT LEG SUPPORTS - GOOD QUALITY "MID RANGE ECONOMY" SEAT - $125
• KIRKEY ALUMINUM SPORTSMAN RACING SEAT - SPORTSMAN SERIES SEAT - 15 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS RED IN COLOR, CLOTH COVER WITH VINYL SIDES COMPLETE SEAT IN OVERALL DECENT USED CONDITION - ONE MINOR RELIEF NOTCH CUT IN EACH SIDE ON THE TOP - DECENT QUALITY ECONOMY SEAT - $75-SOLD 
• BUTLER BUILT DELUXE ALUMINUM RACING SEAT - DELUXE 15 1/2" BASE FRONT, STANDARD SIZE SEAT, DOUBLE WALL ALUMINUM, STANDARD LOWER BODY BASE - 20deg LAYBACK - USED COVER IS BLACK IN COLOR, CLOTH WITH VINYL SIDES, SOME MINOR AGE NICKS AND A LITTLE BIT of NORMAL WEAR ON THE FRONT COVER - OVERALL VERY DECENT CONDITION SEAT - GOOD QUALITY "INTERMEDIATE" SEAT - BACK LABELED FOR WARD BURTON - FORMER CUP SEAT - $175
• KIRKEY LIGHT WEIGHT LATE MODEL STYLE ALUMINUM RACING SEAT - 17" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - 4-PIECE COVER IS BLACK IN COLOR, CLOTH CONSTRUCTION IN OVERALL VERY NICE CONDITION - ALSO HAS RIGHT SIDE HEAD SUPPORT AND RIGHT SIDE LEG SUPPORT INSTALLED WITH BLACK COVER - EXCELLENT CONDITION LIGHT WEIGHT SEAT - P.N. 48700 - $225
• RCI ALUMINUM RACING SEAT - BIG BOY - OLDER ECONOMY LAYBACK RCI SEAT - 20" BASE FRONT - STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, OLDER VINYL COVER COMPLETE SEAT IN OVERALL DECENT CONDITION, SHOWING IT'S AGE - NO TEARS, JUST A FEW TYPICAL AGE NICKS - GOOD CHEAP ECONOMY SEAT - $75
• D&M ALUMINUM RACING SEAT - LARGE WIDTH - OLDER ECONOMY LAYBACK D&M SEAT - 17 1/2" BASE FRONT, STANDARD SIZE SEAT, 20deg LAYBACK - USED COVER IS BLACK IN COLOR, OLDER CLOTH CENTER WITH VINYL SIDES COVER - COMPLETE SEAT IN OVERALL DECENT USED CONDITION, SHOWING IT'S AGE - NO TEARS, JUST A FEW TYPICAL AGE NICKS - GOOD CHEAP ECONOMY SEAT - $75
• LaJOIE - JOY of SEATING ALUMINUM RACING SEAT *NEW* - SUPER SPEEDWAY STYLE SEAT - 16" BASE FRONT, 14" BASE HIP AREA, 13 1/2" RIBS, 20 1/2" SHOULDERS W/12" WIDE HALO, 26 1/2" SHOULDER HEIGHT - BUILT FOR ABOUT A 6'-0" TO 6'-2", 34"-36" WAIST DRIVER WEIGHING 200-220lbs - SEAT WAS BUILT FOR KASEY KAHNE WITH AN INSERT AND HAS SINCE HAD A DIFFERENT STANDARD STYLE COVER INSTALLED FROM LaJOIE SEATING (NOW FITS A SLIGHTLY LARGER BUILD DRIVER) - COMPLETE CONTAINMENT SEAT, FABRIC IS GRAY IN COLOR, FRESH FROM LaJOIE - NEW COVER AND FRAME - SEAT WAS NEVER MOUNTED IN A CAR YET - EXCELLENT FOR MANY APPLICATIONS INCLUDING TOURING LATE MODEL, CAMPING WORLD TRUCKS, NATIONWIDE or CUP SERIES - RETAILS NEW FOR $3500 - CAN BE CERTIFIED BY LaJOIE SEATING AT NO CHARGE - $2095
• 
• LaJOIE - JOY of SEATING ALUMINUM RACING SEAT *FRESH* - SUPER SPEEDWAY STYLE SEAT - 15" BASE FRONT, 13 1/2" BASE HIP AREA, 13" RIBS, 18 1/2" SHOULDERS W/11" WIDE HALO, 23 1/2" SHOULDER HEIGHT - A 5'-10", 33" WAIST, 175lb MALE DRIVER FITS PERFECT IN THIS SEAT - SEAT HAS JUST BEEN GONE OVER AND UPDATED BY LaJOIE SEATING - NEW COVERS TOP AND BOTTOM - COMPLETE CONTAINMENT SEAT, FABRIC IS BLACK IN COLOR, FRESH FROM LaJOIE - EXCELLENT FOR MANY APPLICATIONS INCLUDING TOURING LATE MODEL, CAMPING WORLD TRUCKS, NATIONWIDE or CUP SERIES - RETAILS NEW FOR $3500 - CAN BE CERTIFIED BY LaJOIE SEATING AT NO CHARGE - $1995
• 
• LaJOIE - JOY of SEATING ALUMINUM RACING SEAT - SUPER SPEEDWAY STYLE SEAT - 16 1/2" BASE FRONT, 15 1/2" BASE HIP AREA, 20" SHOULDERS W/11" WIDE HALO, 23 1/2" SHOULDER HEIGHT - BUILT FOR ABOUT A 5'-11" TO 6'-1", 36" WAIST DRIVER WEIGHING ABOUT 185-205lbs - SEAT IS A FORMER KYLE KRISILOFF CRAFTSMAN TRUCK SEAT - COMPLETE CONTAINMENT SEAT, FABRIC IS BLACK IN COLOR - EXCELLENT FOR MANY APPLICATIONS INCLUDING TOURING LATE MODEL - RETAILS NEW FOR $3500 - CAN BE CERTIFIED BY LaJOIE SEATING AT NO CHARGE - $1495
• 

     SEAT ACCESSORIES

• BUTLER BUILT SEAT LEG SUPPORTS - RH and LH LARGE LEG SUPPORTS, P.N.s BBP-2210-SO and BBP-2211-SO WITH RADIO HOLDER - $125/pr
• (2) LEFT SIDE LEG SUPPORT FRAME, ALUMINUM FRAME SUPPORT FOR LEFT SIDE, UNIVERSAL FIT WILL WORK FINE WITHOUT PADDING - $20/EA-(1) SOLD, (1) LEFT
• ALUMINUM SEAT BRACKET - USED ALUMINUM SEAT BRACKET - CUT OUT FOR SEAT BELT HOLE - USED ON FULL CONTAINMENT TYPE SEATS - $5
• RICHARDSON LEG SUPPORT PAD - USED RICHARDSON "STYLE" VELOUR LEFT LEG SUPPORT PAD - OLDER STRAIGHT BOTTOM DESIGN IN VERY GOOD CONDITION WITH NO RIPS - RETAILS NEW FOR $25 - NOW $7.50
• KIRKEY LEFT SIDE HEAD SUPPORT W/COVER - THIS IS A *NEW* LEFT SIDE KIRKEY HEAD SUPPORT - P.N. KIR00200 & KIR00211 - COVER IS A LITTLE DIRTY FROM SITTING, BUT HAS NOT BEEN USED - RETAILS for $29.95 - NOW $26
• ARM/HEAD/LEG SUPPORT - ALUMINUM FRAME SUPPORT for SEAT SIDE WITH PADDING AND BLACK CLOTH TAPE IN NICE SHAPE - UNIVERSAL FIT WILL WORK FINE WITH MOST SEATS - 6" HALF CIRCLE IN SIZE - $15 (QTY of 2)
• ARM/HEAD/LEG SUPPORT - ALUMINUM FRAME SUPPORT for SEAT SIDE WITH BLACK CLOTH COVER AND PADDING IN NICE SHAPE - UNIVERSAL FIT WILL WORK FINE WITH MOST SEATS - 6" HALF CIRCLE IN SIZE - $15 (QTY of 2)
• RICHARDSON RIGHT SIDE SHOULDER SUPPORT - RIGHT SIDE SHOULDER SUPPORT w/VINYL/VELOUR COVER - COVER IS IN NICE SHAPE - RICHARDSON P.N. R52-005-CH w/GRAY COVER - $35 (QTY of 2)-SOLD (1), (1) LEFT
• BUTLER BUILT CENTER KNEE PROTECTOR - GOOD USED CONDITION WITH BLACK VELOUR COVER - NICE PROTECTOR WITH NO MAJOR RIPS or TEARS - CLAMPS AROUND THE STEERING COLUMN TO PROTECT THE KNEES - SIMILAR TO P.N. BUT2502-4001 - $40
• BUTLER BUILT STYLE CENTER KNEE PROTECTOR - GOOD USED CONDITION WITH GRAY CLOTH COVER - NICE PROTECTOR THAT HAS NEVER BEEN INSTALLED - BOLTS TO A FLAT MOUNT UNDER THE DASH TO PROTECT THE KNEES - SIMILAR TO P.N. BUT2502-4001 - $30
• RCI ALUMINUM HEAD SUPPORT - RIGHT HEAD SUPPORT in FAIR SHAPE - BLACK VINYL IN COLOR - MINOR AGE NICKS - OLDER SUPPORT, similar to P.N. BUT-2266-4101 - $15
• KIRKEY RIGHT SIDE HEAD SUPPORT - RIGHT SIDE HEAD SUPPORT - MISSING CLOTH COVER - KIRKEY P.N. 00100 - $10-SOLD
• KIRKEY STYLE RIGHT HEAD SUPPORT - RIGHT SIDE HEAD SUPPORT - UNIVERSAL STYLE SUPPORT - BLACK VINYL W/CLOTH SIDE - COULD USE A LITTLE PADDING - $20
• BUTLER BUILT SEAT CENTER KNEE PROTECTOR - CENTER LEG SUPPORT - GOOD USED CONDITION WITH BLACK VELOUR COVER - NICE PROTECTOR WITH NO MAJOR RIPS or TEARS - CLAMPS AROUND THE STEERING COLUMN TO PROTECT THE KNEES - P.N. BUT2502-4001 - $20 
• BUTLER BUILT SEAT CENTER KNEE PROTECTOR - CENTER LEG SUPPORT - GOOD USED CONDITION WITH GRAY VELOUR COVER - NICE PROTECTOR WITH NO MAJOR RIPS or TEARS - CLAMPS AROUND THE STEERING COLUMN TO PROTECT THE KNEES - P.N. BUT2502-4001 - $20 (QTY of 8) -SOLD (1), (7) LEFT
• BUTLER BUILT RIGHT SIDE HEAD SUPPORT - NARROW 3 1/2" RIGHT SIDE HEAD SUPPORT with VINYL COVER - NICE SHAPE, CUSTOM BUILT for an ADVANTAGE SEAT for TONY STEWART from GIBBS - about 1" WIDER THAN BUTLER BUILT P.N. 2209 - $20-SOLD
• HOME SHOP FABBED RIGHT SIDE ALUMINUM SEAT HEAD SUPPORT - OLDER RIGHT SIDE HEAD SUPPORT - UNIVERSAL STYLE SUPPORT FADED BLACK VINYL - WOULD FIT RIGHT or LEFT SIDE - $10
• BUTLER BUILT SHOULDER SUPPORT - RIGHT or LEFT SIDE SHOULDER SUPPORT - MISSING CLOTH COVER IN GOOD SHAPE - DOUBLE WALL 1/2" THICK - similar to P.N. BUT 2207-S01 or BUT 2206-S01 - $20 (QTY of 2)
• BUTLER FULL CONTAINMENT SEAT ALUMINUM HALO - EXCELLENT CONDITION USED HALO for USE WITH BUTLER FULL CONTAINMENT SEATS - NICE BLACK COVERS WITH NO RIPS or TEARS - RIGHT SIDE MEASURES APPX. 20" - LEFT SIDE MEASURES APPX. 13" WITH APPX 11 1/2" WIDTH BETWEEN PADS - $175
• 
• BUTLER FULL CONTAINMENT SEAT ALUMINUM HALO - EXCELLENT CONDITION USED HALO for USE WITH BUTLER FULL CONTAINMENT SEATS - NICE BLACK COVERS WITH NO RIPS or TEARS - RIGHT SIDE MEASURES APPX. 20" - LEFT SIDE MEASURES APPX. 13" WITH APPX 12" WIDTH BETWEEN PADS - $175

          INTERIOR SAFETY, APPAREL AND ACCESSORIES

• SIMPSON TRIANGLE CAGE WINDOW NET - DATED APR 03 - $20
• RJS STRAP ON ARM RESTRAINTS - BLACK in COLOR, GOOD CONDITION STRAPS - $20
• SIMPSON TRIANGLE CAGE NET - 1" WEBBING, BLACK IN COLOR WITH SNAP LATCH, SIMPSON P.N. 36020BK, DATED JULY 02 - $25
• M&R RIGHT SIDE TRIANGLE WINDOW NET, NEW CONDITION, NO DATE, INCLUDES EXTRA RATCHET, BLACK IN COLOR - $50
• ALUMINUM CLAMP ON DRINK CUP HOLDER - EXCELLENT CONDITION, READY TO MOUNT, 4" DIA, LONGACRE P.N. LON22551 - $30
• ALUMINUM CLAMP ON DRINK CUP HOLDER - EXCELLENT CONDITION, READY TO MOUNT, 5" DIA, SIMILAR TO ALLSTAR AND LONGACRE STYLE HOLDERS - $30
• ALUMINUM CLAMP ON DRINK CUP HOLDER - EXCELLENT CONDITION, READY TO MOUNT, 4" DIA, ALLSTAR PERFORMANCE P.N. ALL10480 - $30 (QTY of 2)-SOLD (1), (1) LEFT
• REMINGTON HELMET BAG - USED REMINGTON HELMET/SUIT BAG - GRAY/BLACK/YELLOW IN COLOR - EASY ACCESS SIDE AND TOP COVERS IN GOOD CONDITION WITH NO TEARS OR RIPS. - $10
• MECHANIX RCR PIT GLOVES - *NEW* IN THE OLD PACKAGING - BLACK IN COLOR - SIZE LARGE - OLD PACKAGE RCR EARNHARDT #3 GLOVES - $10
• SIMPSON STRAP ON ARM RESTRAINTS - BLACK in COLOR, GOOD CONDITION STRAPS - OLDER DATE of DEC 98 - $15 
• MESH STYLE WINDOW NET - GOOD USED CONDITION - DRAGONSLAYER SAFETY EQUIPMENT - STANDARD 18"x24" - BLACK IN COLOR, DATED FEB 04 - $10
• RJS 2 PC - SINGLE LAYER FIRE SUIT - PANTS ONLY - DECENT USED SUIT, USED FOR ABOUT 1/2 SEASON - BLACK, WITH WHITE STRIPES - EXCELLENT CONDITION - 1 LAYER - SFI 3.2A/1 CERTIFIED - 2 PIECE, SIZE L - DECENT PAIR of PANTS - $40
• COLEMAN WINDOW NET - INSTALLATION KIT and NET - SPRING LOADED COLEMAN INSTALL KIT TOP ROD WITH A BLUE MESH STYLE 18"x24" NET WITH A SMALL 1" HOLE TORN IN IT - $20
• COLEMAN WINDOW NET - INSTALLATION KIT and NET - SPRING LOADED COLEMAN INSTALL KIT TOP AND BOTTOM RODS WITH A FADED RED RIBBON STYLE 18"x24" NET - $20
• (5) PACKS of BANANA TEAR-OFFS - KIRKEY "ULTRATHINS" P.N. 1003 - CROSS REF to ULTRASHIELD 1202 BANANAS (5) NEW PACKAGES of 20 - $5-SOLD
• LEAF SAFETY EQUIPMENT 2PC - SINGLE LAYER FIRESUIT - FAIR CONDITION USED SUIT, USED FOR SEVERAL SEASONS - FADED RED - NO MAJOR RIPS or TEARS - 1 LAYER - SFI 3.2A/1 CERTIFIED - 2 PEICE, SIZE 2XL - FAIR CONDITION SUIT - GOOD ONLY FOR DEMOS OR ENDURO STYLE RACING (BETTER THAN A FLANNEL SHIRT) - $40
• TRACK FRESH CARBON MONOXIDE IN LINE FILTER SYSTEM - BSR PRODUCTS P.N. SAF.TF.3, LISTS for $169 NEW - FILTER HOUSING IS IN LIKE NEW SHAPE - FILTER INSERTS SOLD SEPARATELY - INSTALL IN LINE WITH BLOWER HELMET LINE TO FILTER OUT CARBON MONOXIDE AND OTHER CONTAMINANTS, P.N. TF-3, STD 1.25" IN/OUT - $125 (QTY of 3)
• 
• RIBBON STYLE WINDOW NET - SIMPSON STANDARD 16" x 20" WITH ANGLED SIDE - BLACK IN COLOR, NO DATE, INCLUDES M&R LEVER LATCH INSTALLING KIT, ONLY NEEDS CAGE TABS - $35
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 14" x 18"/22" ANGLED - BLACK IN COLOR, OCT 05, REMOVED FROM A CUP CAR - INCLUDES LEVER LATCH INSTALLING KIT UPPER BAR, ONLY NEEDS CAGE TABS AND LOWER ROD - $20
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 15" x 18"/25" ANGLED - BLACK IN COLOR, NO DATE, REMOVED FROM A CUP CAR - $10
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 15" x 18"/22" ANGLED - BLACK IN COLOR, AUG 06, REMOVED FROM A CUP CAR - $10
• MESH STYLE WINDOW NET - TEAM TECH BRAND - *NEW* NEVER INSTALLED, HAD BEEN SITTING, STANDARD 18" x 24" RECTANGULAR NET - RED IN COLOR, DEC 96 - $10
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 15" x 18"/22" ANGLED - BLACK IN COLOR, NO DATE, REMOVED FROM A CUP CAR - $10
• SIMPSON TRIANGLE CAGE NET - 1" WEBBING - BLACK IN COLOR WITH SNAP LATCH - SIMPSON P.N. 36020BK - DATED JUL 03 - $20
• SIMPSON TRIANGLE CAGE NET - 1" WEBBING - BLACK IN COLOR WITH SNAP LATCH - VERY SIMILAR to SIMPSON P.N. 36020BK - NO DATE - $20 (QTY of 2)-SOLD (1), (1) LEFT
• SIMPSON TRIANGLE CAGE NET - 1" WEBBING - BLACK IN COLOR - MEASURES 8" HIGH x 30" LONG - SIMILAR to SIMPSON P.N. 36020BK - NO DATE - $5
• INTERIOR VELCRO HARNESS STRAPPING - (3) STRIPS of 1" WIDE VELCRO STRAPPING for INTERIOR CLEAN-UP IN DRIVERS AREA for WIRING, RADIO HARNESSES, DRINK LINES, ETC - REMOVED FROM A CUP CAR w/ADJUSTERS - $5 (QTY of 2)
• INTERIOR VELCRO HARNESS STRAPPING - (4) STRIPS of 1" WIDE VELCRO STRAPPING for INTERIOR CLEAN-UP IN DRIVERS AREA for WIRING, RADIO HARNESSES, DRINK LINES, ETC - REMOVED FROM A CUP CAR w/ADJUSTERS - $7.50
• HIGH DENSITY ROLL BAR PADDING - (1) STICK of 1 1/2" BAR - THIN STYLE STICK - NEVER INSTALLED - $5
• RIBBON STYLE ANGLED WINDOW NET - DEIST CUSTOM 15 1/2" x18"/22" ANGLED - BLACK IN COLOR, NO DATE - REMOVED FROM A DEI CUP CAR - $10 (QTY of 2)
• RIBBON STYLE ANGLED WINDOW NET - DEIST CUSTOM 16" x18"/24" ANGLED - BLACK IN COLOR, DATED SEP 06 - REMOVED FROM A DEI CUP CAR - $10 
• RIBBON STYLE ANGLED WINDOW NET - DEIST CUSTOM 16" x18"/24" ANGLED - BLACK IN COLOR, DATED JUN 06 - REMOVED FROM A DEI CUP CAR - $10 -SOLD
• RIBBON STYLE WINDOW NET - DEIST CUSTOM 15" x18" - BLACK IN COLOR, NO DATE - REMOVED FROM A DEI CUP CAR - $10-SOLD
• RIBBON STYLE WINDOW NET - PURPLE - STANDARD 18"x24" NET - PURPLE IN COLOR, DATED APR 06 - $10-SOLD
• M&R SPRINT TRIANGLE CAGE NET - 1" WEBBING - BLACK IN COLOR - MEASURES 8" HIGH x 48" LONG - Similar to SIMPSON P.N. 36020BK - NO DATE - $5
• PARKER PUMPER STYLE HELMET BLOWER - GOOD WORKING CONDITION - MOTOR TESTED GOOD, SIMILAR TO P.N. ALL13001 - 1 3/4" CAGE MOUNT - 2 3/4" DIA IN/ 1 3/4" DIA OUTLET - $70
• PAGET BOOT HEAL HEAT SHEILD - REFLECTIVE SILVER IN COLOR - KEEPS HEALS COOL, FITS ALL SIZES - $20-SOLD
• HELMET FRESH AIR HOSE - 22" LONG HELMET HOSE - 1 1/2" DIA WITH 3" FUNNEL ADAPTER ON ONE END - $10
• ALUMINUM CLAMP-ON DRINK CUP HOLDER - EXCELLENT CONDITION, READY TO MOUNT, 5" DIA - SIMILAR TO LONGACRE P.N. LON 22551 - $30
• SIMPSON HELMET BAG - STANDARD INTERIOR, BLACK IN COLOR - NO RIPS or TEARS - EXCELLENT CONDITION - $20
• G-FORCE 2PC - SINGLE LAYER FIRESUIT - PANTS ONLY - VERY GOOD CONDITION USED SUIT 0 USED FOR ONLY ABOUT 1/2 SEASON - BLACK WITH WHITE STRIPES 1 LAYER - SFI 3.2A/1 CERTIFIED - SIZE XLG - NICE PAIR of PANTS - $40
• SIMPSON HELMET SHIELD - GOOD USED CONDITION - NO SCRATCHES or CLOUDINESS - FITS SUPER SHARK/ SPEEDWAY SHARK/ INVADER and VALOR - SMOKE - P.N. SIM88601A - $20 (QTY of 2)
• PARKER PUMPER INSIDE HELMET BLOWER - GOOD WORKING CONDITION - 2 SPEEDS - MOTOR TESTED GOOD, P.N. PP001 - MOUNTED WITH OUTSIDE AIR INLET BOX - 2 3/4" DIA IN/ 1 3/4" DIA OUTLET - $85 (QTY of 2)-SOLD (1), (1) LEFT
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 16" TALL x 18"/24" ANGLED - BLACK IN COLOR, NO DATE, REMOVED FROM A CUP CAR - $10
• RIBBON STYLE STANDARD WINDOW NET - 18"x18" - PURPLE IN COLOR - NO DATE - $10
• G-FORCE 2PC - SINGLE LAYER FIRESUIT - PANTS AND JACKET - VERY GOOD CONDITION USED SUIT, USED FOR ONLY ABOUT 1/2 SEASON - BLACK WITH WHITE STRIPES - 1 LAYER - SFI 3.2A/1 CERTIFIED - 2 PIECE, SIZE M - NICE TOP AND BOTTOM - $65-SOLD
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 16"x18"/24" ANGLED - BLACK IN COLOR, DATED JUN 06, REMOVED FROM A CUP CAR - $10
• ALUMINUM CLAMP-ON DRINK CUP HOLDER - EXCELLENT CONDITION, READY TO MOUNT, 4" DIA x 5 1/4" TALL - 1 3/4" ROUND CLAMP MOUNTED AT A 45deg ANGLE - SIMILAR TO LONGACRE P.N. LON22551 - $20
• RIBBON STYLE ANGLED WINDOW NET - SIMPSON CUSTOM 16"x19"/25" ANGLED - BLACK IN COLOR, NO DATE, REMOVED FROM A CUP CAR - $10
• SIMPSON TRIANGLE RIGHT SIDE CAGE NET - 1" WEBBING - BLACK IN COLOR WITH SNAP LATCH - 36" LONG - SIMILAR to SIMPSON P.N. 36020BK - not DATED - $15
• TRD RIBBON STYLE ANGLED WINDOW NET - TRD SIMPSON CUSTOM 21"x19"/23" ANGLED - BLACK IN COLOR, DATED MAR 06, REMOVED FROM A CRAFTSMAN TRUCK - $10
• TEAM TECH MESH ROOF CAGE NET - MESH WEBBING - BLACK IN COLOR - MEASURES 20"x28" - HAS REINFORCED EYELETS SPACED EVERY 4" AROUND THE EDGE - $15
• MISC HELMET TETHERS and TRIANGLE RIGHT SIDE CAGE NET - 1" WEBBING - BLACK IN COLOR - NO ENDS - 36" LONG - ALSO INCLUDES MISC HELMET TETHERS - $10
• SIMPSON TRIANGLE RIGHT SIDE CAGE NET - 1" WEBBING - BLACK IN COLOR WITH SNAP LATCH - 24" LONG - SIMPSON P.N. 36020BK - NEVER INSTALLED, BUT DATED MAY 02 - $15
• SIMPSON TRIANGLE RIGHT SIDE CAGE NET - 1" WEBBING - BLACK IN COLOR WITH SNAP LATCH - 24" LONG - SIMPSON P.N. 36020BK - NEVER INSTALLED, BUT DATED SEP 01 - $15

          HARNESSES and HARDWARE

• USED 5-POINT BELTS, SEVERAL SETS, VARIOUS COLORS AND BRANDS, 2-5 YEARS OLD, GREAT FOR ENDURO AND DEMO CARS IN GREAT SHAPE -$25-$35/SET
• SIMPSON LAP BELT, ONE SIMPSON LAP BELT, UNMARKED DATE OF MANUFACTURER, SEASON WARN, HAS BOTH BOLT ON BRACKET AND END THAT LATCHES ONTO "LATCH STYLE" SEAT BELTS - $5
• 4 POINT CAM LOCK RACING HARNESS - M&R PRODUCTS 4 POINT RACING HARNESS - FADED BLAZE ORANGE IN COLOR - DATED JUN 05 IN GOOD CONDITION - OUT OF A DIRT SPORTSMAN - DECENT YET FOR ENDURO AND DEMO CARS - $45-SOLD
• M&R SEAT BELT TABS - BOLT IN STYLE SEAT BELT TABS - *NEW* IN THE PACKAGE - P.N. M&R 94599-05 (NEW WAS $5.50) - $4
• M&R RACING HARNESS SUB BELT - ANTI-SUBMARINE BELT - SILVER IN COLOR, DATED MAR 05 IN DECENT SHAPE - OUT OF AN ASPHALT SPORTSMAN - DECENT YET FOR ENDURO AND DEMO CARS - $5
• WILLANS LAP BELTS for CAM LOCK - BLACK in COLOR, DATED MAY 06 - COMPLETE LAP BELTS in DECENT SHAPE - CAMLOCK STYLE LATCHING OUT OF A CUP CAR (2PT LAP BELTS ONLY) - DECENT YET for ENDURO AND DEMO CARS - $10 (QTY of 2)-SOLD (1), (1) LEFT
• WILLANS 6 POINT CROTCH STRAPS - BLACK in COLOR, DATED MAY 06 - PAIR of STRAPS WITH LEATHER HARDWARE CENTER- NEEDS LATCHING ENDS - OUT of A CUP CAR - DECENT YET for ENDURO AND DEMO CARS - $5 (QTY of 2)
• WILLANS 6 POINT CROTCH STRAP - BLACK in COLOR, DATED MAY 06 - SINGLE STRAP - NEEDS LATCHING END - OUT of A CUP CAR - DECENT YET for ENDURO AND DEMO CARS - $5
• SIMPSON 5 POINT RACING HARNESS - BLACK in COLOR, NO DATE PAD - COMPLETE 5 POINT SET IN DECENT SHAPE - CLIP-IN MOUNTING STYLE - LIGHTLY FADED SHAPE OUT of a DIRT SPORTSMAN - DECENT YET FOR ENDURO AND DEMO CARS - $15-SOLD
• SCHROTH 4 POINT CAMLOCK RACING HARNESS - BLACK in COLOR, DATED FEB 04 - COMPLETE CAMLOCK 4 POINT SET IN GREAT SHAPE OUT of a CUP CAR - $35
• G-FORCE 4 POINT RACING HARNESS - BLUE in COLOR, lightly faded (DATED APR 01) - COMPLETE 4 POINT SET IN DECENT SHAPE "Y" STYLE SHOULDER STRAPS OUT of a LIMITED LATE MODEL - $15-SOLD
• RJS 4 POINT RACING HARNESS - BLUE in COLOR, lightly faded (DATED APR 01) - COMPLETE 4 POINT SET IN DECENT SHAPE "Y" STYLE SHOULDER STRAPS OUT OF A DIRT SPORTSMAN - $15-SOLD
• IMPACT RACING SEAT BELT TABS - BOLT IN STYLE SEAT BELT TABS, NEW OUT OF THE PACKAGE - PAIR of BLACK POWDER COATED TABS - $4/pr
• WILLANS 6 POINT CROTCH STRAP - BLACK in COLOR, DATED MAY 06 - SINGLE STRAP - NEEDS LATCHING END - OUT of A CUP CAR - DECENT YET FOR ENDURO AND DEMO CARS - $5
• M&R SPRINT TRIANGLE CAGE NET - 1" WEBBING - BLACK IN COLOR MEASURES ABOUT 8" HIGH x 30" LONG - similar TO SIMPSON P.N. 36020BK - NO DATE - A COUPLE SEASONS OLD (1) RATCHET ON THE BACK END - $10
• TRIANGLE RIGHT SIDE CAGE NET - 1" WEBBING - BLACK IN COLOR - MEASURES ABOUT 6" HIGH x 24" LONG - NO DATE - A COUPLE SEASONS OLD - $5
• WILLANS 4 POINT RACING HARNESS for CAM LOCK - BLACK in COLOR, DATED MAY 06 - COMPLETE LAP BELTS in DECENT SHAPE AND SHOULDER STRAPS - CAMLOCK STYLE LATCHING - OUT OF A CUP CAR - DECENT YET FOR ENDURO AND DEMO CARS - $25
• RJS RACING SHOULDER HARNESS - BLUE in COLOR, DATED JUN 03 - 2 POINT "Y" SET IN DECENT SHAPE, OUT of a DIRT LIMITED LATE MODEL - GREAT FOR ENDURO AND DEMO CARS - $5

         HEAT INSULATION/SHEATHING

• SIMPSON HEAT INSULATION BLANKETS, VARIOUS SIZES, $10 AND UP
•  
• DRY SUMP TANK INSULATION COVERS - SEE "OIL SYSTEMS"

• HEAT INSULATION - KOOL BARRIER - HEAT INSULATION/BARRIER - CYLINDRICAL SHAPE - 5" DIA x 6" TALL - PADDED 1/2" INSULATION FOR DRINK CUP SIZE PROTECTION REINFORCED MOUNTING HOLES AROUND THE OUTER EDGE - GOOD USED SHAPE - $10 (QTY of 2)-SOLD (1), (1) LEFT
• HEAT INSULATION - KOOL BARRIER - HEAT INSULATION/BARRIER - CYLINDRICAL SHAPE - 4" DIA x 5" TALL - PADDED 1/2" INSULATION FOR DRINK CUP SIZE PROTECTION REINFORCED MOUNTING HOLES AROUND THE OUTER EDGE - GOOD USED SHAPE - $10 (QTY of 2)
• HEAT INSULATION - MISC - HEAT INSULATION/PADDING - (1) APPX 6"x 22" and (3) APPX 3"x 6" - 1/8" PADDED PIECES - GOOD USED SHAPE - $5
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - 1/2" I.D. x 12FT LONG - $20
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - 3/4" I.D. x 12FT LONG - $22-SOLD
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - *NEW* CUT OFF PIECE - 2" I.D. x 6FT LONG - $25
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - *NEW* CUT OFF PIECES - SCRAPS APP 6-8pcs 1 1/2" I.D. x 12-36" LONG - $35
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - *NEW* CUT OFF PIECES - SCRAPS APP 6-8pcs 3/4" I.D. x 12-36" LONG - $35
• DEI HEAT SHEATH SLEEVING - DESIGN ENGINEERING BRAND ALUMINIZED HEAT INSULATION SLEEVING - *NEW* CUT OFF PIECES - SCRAPS APP 4-5pcs 1 1/2" I.D. x 12-24" LONG - $20
• TRD DRIVER'S DOOR BAR PAD/PADDING/HEAT INSULATION - 1" THICK HEAT INSULATION PAD WITH BLACK VELOUR COVERING ONE SIDE - HAS HOLE SNAPS AROUND THE OUTSIDE PERIMETER - MEASURES APPX 22 1/4" x 44" - REMOVED FROM A TRD CUP TEAM - $45 (QTY of 2)
• HEAT INSULATION for FLOOR PAD - GOOD USED CONDITION - SHEEN SILVER ON EACH SIDE - MEASURES APPX. 23"x31" - $40-SOLD

         FIREBOTTLES AND ACCESSORIES

• ALUMINUM FIRE EXTINGUISHER MOUNTING BRACKETS, MOUNTS TO 1 3/4" TUBING FOR 5 1/4" BOTTLE - $40/PR
• ALUMINUM FIRE EXTINGUISHER MOUNTING BRACKET - BARE ALUMINUM RING WITH TENSION CLAMP FOR 5 1/4" BOTTLE, MADE BY "PRO-WERKS" - MOUNTS FOR 2 3/8" BRACKETRY - $10
• SAFETY SYSTEMS COILED STEEL TUBING KIT - APPX 9' of .250" COIL OF STEEL TUBING LEFT FROM A FIRE BOTTLE INSTALLATION KIT, ALMOST NEW COIL 90% FULL ROLL, NEVER USED - SAFETY SYSTEMS P.N. SAFSTK - $4 (QTY of 2)-SOLD (1), (1) LEFT
• 10LB FIREBOTTLE BRAND FIRE BOTTLE - FIREBOTTLE BRAND FIRE BOTTLE, TOP CUP TEAM TAKE-OFF, 10LB SIZE, BOTTLE IS IN GREAT SHAPE, FULLY CHARGED - INCLUDES 5' LINE WITH HEAT SENSITIVE DISCHARGE NOZZLE - READY TO INSTALL, DATED 1/05, FILLED WITH HALON 1211 - EXCELLENT CONDITION BOTTLE (STANDARD SIZE) - $145
• 30" FIRE BOTTLE ACTIVATION CABLE - GREAT CONDITION CABLE - $20
• 32" FIRE BOTTLE ACTIVATION CABLE - GREAT CONDITION CABLE - P.N. FIR-CA - $15
• 38" FIRE BOTTLE ACTIVATION CABLE - GREAT CONDITION CABLE - P.N. FIR-CA - $15 (QTY of 4)-SOLD ALL (4)
• 44" FIRE BOTTLE ACTIVATION CABLE - GREAT CONDITION CABLE - P.N. FIR-CA - $15
• 48" FIRE BOTTLE ACTIVATION CABLE - GREAT CONDITION CABLE - P.N. FIR-CA - $15 (QTY of 6)-SOLD (1), (5) LEFT
• 10LB FIREBOTTLE BRAND FIRE BOTTLE - (TOP CUP TEAM TAKE-OFF), 10LB SIZE, BOTTLE IS IN GREAT SHAPE, FULLY CHARGED, includes 5' LINE WITH HEAT SENSITIVE DISCHARGE NOZZLE - READY TO INSTALL, DATED 1/06 - FILLED WITH HALON 1211 - EXCELLENT CONDITION BOTTLE W/SFI STICKER (STANDARD SIZE) - $145
• 10LB FIREBOTTLE BRAND FIRE BOTTLE - (TOP CUP TEAM TAKE-OFF), 10LB SIZE, BOTTLE IS IN GREAT SHAPE, FULLY CHARGED, includes 5' LINE WITH HEAT SENSITIVE DISCHARGE NOZZLE - READY TO INSTALL, DATED 1/07 - FILLED WITH DuPONT FE-36 - EXCELLENT CONDITION BOTTLE W/SFI STICKER (STANDARD SIZE) - $125 (QTY of 2)-BOTH SOLD
• 
• 5LB FIREBOTTLE BRAND FIRE BOTTLE - (OLDER LLM TAKE-OFF) - 5LB SIZE, LT MODEL, BOTTLE IS IN DECENT SHAPE, FULLY CHARGED - READY TO INSTALL, OLD DATE of JAN 94, FILLED WITH FM 100 - DECENT CONDITION BOTTLE (STANDARD SIZE) W/20" ACTIVATION CABLE - $75
• 7LB SHOP FIRE EXTINGUISHER - RECHARGEABLE DRY CHEMICAL STYLE EXTINGUISHER - SAFE AND IN THE GREEN (FULL) - PURCHASED NEW IN 7/07 (FRESHENED OUR SHOP EXTINGUISHERS) (QTY of 5)
• 3LB SHOP FIRE EXTINGUISHER - RECHARGEABLE DRY CHEMICAL STYLE EXTINGUISHER - SAFE AND IN THE GREEN (FULL) - PURCHASED NEW IN 5/08 (FRESHENED OUR SHOP EXTINGUISHERS) (QTY of 2)
• 14" FIRE BOTTLE ACTIVATION CABLE - GOOD CONDITION CABLE - P.N. FIR-CA, 14" LONG - $10
• 30" FIRE BOTTLE ACTIVATION CABLE - GOOD CONDITION CABLE - P.N. FIR-CA, 30" LONG - $10

ELECTRICAL &  ACCESSORIES 

(DISTRIBUTORS/TACHS/CONTROL BOXES/ ETC)

• MISC GAUGES, STEWART WARNER & AUTOMETER - $5 - $15
• STREET STOCK WIRING HARNESS, BATTERY CABLE (ABOUT 4'), MASTER DISCONNECT SWITCH, QUICKCAR TOGGLE SWITCH AND PUSH BUTTON - $30
• MOROSO GLASSCORE SILICONE SPARK PLUG WIRE SET - MOROSO P.N. 73539, SET LOOKS TO BE NEW, BUT DUSTY, IN AN OLD INVENTORY BOX - $45 (QTY of 2)
• EXTERNAL ELECTRICAL SOCKET - FOR OIL HEATERS AND BATTERY CHARGERS - THIS ONE WAS REMOVED FROM AN OIL TANK ASSEMBLY IN GOOD WORKING CONDITION - $15
• MSD IGNITION AUTOMATIC COIL SELECTOR - MSD AUTOMATIC COIL SELECTOR, MSD P.N. 8210 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - $25
• MALLORY IGNITION AUTOMATIC COIL SELECTOR - MALLORY P.N. 29000, *NEW* IN THE PACKAGE, 1/2 OF NEW AT -$45
• AUTOMETER GAUGE PANEL - OIL PRESSURE AND WATER TEMP STANDARD GAUGES in a PANEL THAT HAS A CENTER OPENING FOR A 5" MONSTER TACH (NOT INCLUDED) - GAUGES ARE P.N. ATM3421 and ATM3431, BOTH TESTED AND WORK FINE - $70
• JACOBS PLUG WIRES HEI - JACOBS PLUG WIRES, HEI CAP STYLE, UNDER HEADER USED ONE SEASON - VERY NICE SPARE SET WITH CERAMIC INSULATORS ON PLUG SIDE - STRAIGHT ENDS - $75
• DELPHI HI-ENERGY SPARK PLUG WIRES - CUP TAKE OFF USED WIRES, WILL WORK WITH HEI SET-UPS - $40
• SPARE 8.5mm RACING PLUG WIRES for SOCKET CAP - (2) USED PHILLIPS RACING WIRES W/HEAT WRAP - SHORT 15" AND 16" IN LENGTH IN GOOD CONDITION - $10/pr
• SPARE 8.5mm RACING PLUG WIRES for SOCKET CAP - (2) USED PHILLIPS RACING WIRES W/HEAT WRAP - INTERMEDIATE 19" AND 20" IN LENGTH IN GOOD CONDITION - $10/pr
• SPARE 8.5mm RACING PLUG WIRES for SOCKET CAP - (2) USED PHILLIPS RACING WIRES W/HEAT WRAP - INTERMEDIATE 24" AND 26" IN LENGTH IN GOOD CONDITION - $10/pr
• SPARE 8.5mm RACING PLUG WIRE for SOCKET CAP - (1) USED PHILLIPS RACING WIRE W/HEAT WRAP - LONGER 35" IN LENGTH IN GOOD CONDITION - $5
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES W/HEAT WRAP SLEEVE - SHORT 14" AND 15" IN LENGTH IN GOOD CONDITION - $8/pr
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES W/HEAT WRAP SLEEVE - INTERMEDIATE 19" AND 20" IN LENGTH IN GOOD CONDITION - $8/pr
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES W/HEAT WRAP SLEEVE - LONGER 36" AND 37" IN LENGTH IN GOOD CONDITION - $8/pr
• SPARE 8mm RACING PLUG WIRE for SOCKET CAP - (1) USED HOLLEY ANNIHILATOR RACING WIRE W/HEAT WRAP SLEEVE - INTERMEDIATE 27" IN LENGTH IN GOOD CONDITION - $4
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES - SHORT 12" AND 13" IN LENGTH IN GOOD CONDITION - $8/pr
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES - INTERMEDIATE 20" AND 25" IN LENGTH IN GOOD CONDITION - $8/pr
• SPARE 8mm RACING PLUG WIRES for SOCKET CAP - (2) USED HOLLEY ANNIHILATOR RACING WIRES (1) W/HEAT WRAP SLEEVE, (1) WITHOUT- LONGER 33" AND 34" IN LENGTH IN GOOD CONDITION - $8/pr
• LONGACRE MASTER DISCONNECT SWITCH - HEAVY DUTY SWITCH W/ALTERNATOR PROVISION, P.N. LON45780 - $15-SOLD
• PUSH BUTTON STARTER SWITCH W/RUBBER COVER - TESTED GOOD, REBCO P.N. 160-1485 - $5 (QTY of 2)
• PAIR of HEAVY DUTY TOGGLE SWITCHES W/RUBBER COVERS - TESTED GOOD, 20A, REBCO P.N. 160-1465 - ONE COVER HAS SOME NICKS SHOWING AGE - $15/pr
• PAIR of HEAVY DUTY TOGGLE SWITCHES W/RUBBER COVERS - TESTED GOOD, 20A, REBCO P.N. 160-1465 - $15/pr
• MSD DISTRIBUTOR STANDARD CAP AND ROTOR - SOCKET CAP P.N. 8437 and ROTOR P.N. 8467 - ITEMS ARE *NEW* IN A BOX - RETAIL for $31, *NOW* ONLY $20-SOLD
• AUTOMETER FUEL PRESSURE ISOLATOR - OLDER RED ANODIZED VERSION of P.N. ATM5282 IN EXCELLENT CONDITION WITH 48" STAINLESS BRAIDED LINE - $65
• MSD PICK-UP EXTENSION WIRE - 6ft LONG 2 WIRE PICK-UP CABLE CONNECTS YOUR DISTRIBUTOR to YOUR MSD BOX - P.N. 8860 - $8 (QTY of 2)-SOLD (1), (1) LEFT
• MSD BLASTER COIL - BLASTER 2, P.N. MSD8202 - MSD MACHINE TESTED, WORKS GREAT, NICE SPARK - $20 (QTY of 7)-SOLD ALL (7)
• MSD IGNITION AUTOMATIC COIL SELECTOR - MSD AUTOMATIC COIL SELECTOR, MSD P.N. 8210 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - $20-SOLD
• MSD HVC COIL - FOR USE WITH HVC BOX, P.N. MSD8250 - MSD MACHINE TESTED, WORKS GREAT, NICE SPARK - $70-SOLD
• MSD BLASTER COIL - BLASTER 2, P.N. MSD8202 - MSD MACHINE TESTED, WORKS GREAT, NICE SPARK, EXCELLENT PHYSICAL SHAPE AS WELL - $20 (QTY of 2)
• ALLSTAR BRAND GM DISTRIBUTOR CAP - FITS STOCK GM AND STANDARD GM MSD BILLET DISTRIBUTORS - *NEW* IN THE BOX (P.N. 81224) - $15
• KRC ALTERNATOR PULLEY - 6 GROOVE ALUMINUM SERPENTINE BELT PULLEY - P.N. KRC-40150-600 - 3 1/2" O.D. - LIKE NEW CONDITION - $20
• COLEMAN COG DRIVE ALTERNATOR PULLEY - 28 TOOTH COLEMAN COG PULLEY - P.N. 390 3625 WITH GUARDS, P.N. 328 128 - LIKE NEW CONDITION - $45
• TURBO START 16V BATTERY CHARGER - 16 VOLT BATTERY CHARGER, OLDER CHARGER USED FOR A FEW SEASONS WITH A DRAG CAR - NICE AND CLEAN UNIT - TESTED IN GOOD WORKING CONDITION - GOOD CONDITION UNIT, P.N. TRBAGM25A19V - SPECIFICALLY DESIGNED FOR CHARGING 16V SYSTEMS - $125
• OPEN/CLOSE RV SWITCH W/LED - *NEW* IN THE PACKAGE - OPEN/CLOSE or ON/OFF W/LED LIGHT - $5
• GREEN LED LIGHT - RED and BLACK LEADS W/YELLOW JUMPER - $4
• AUTOMETER PRO-COMP FUEL PRESSURE GAUGE - EXCELLENT CONDITION, 2" O.D., ULTRALITE STYLE - $10
• REBCO PRO-COMP LIQUID FILLED 3 GAUGE PANEL - AUTOMETER ULTRA-NITE GLOW-IN-THE-DARK GAUGES - OIL PRESSURE, WATER TEMPERATURE AND OIL TEMPERATURE GAUGES WITH WARNING LIGHTS - AROUND 2 SEASONS OLD in GREAT SHAPE - $195-SOLD
• AUTOMETER ELECTRONIC FUEL PRESSURE SENSOR - AUTO METER P.N. 2246 (OLD P.N. 4590-0023-12) WITH 10" LONG -3AN to -2AN BRAIDED STEEL LINE - LIKE NEW CONDITION REMOVED FROM A NATIONWIDE CAR (0-100psi) - $25 (QTY of 4)
• BATTERY GROUND STRAP - REMOVED FROM A NATIONWIDE CAR - 16" LONG - COMPLETE WITH HEAT SHEATH - $5 (QTY of 3)-SOLD (1), (2) LEFT
• BATTERY GROUND STRAP - REMOVED FROM A NATIONWIDE CAR - 20" LONG - COMPLETE WITH HEAT SHEATH - $5 (QTY of 2)
• AUTOMETER PRO-LITE - P.N. 3240, RED LENS, FACTORY SERVICED - BASICALLY NEW UNIT, just pulled from the RETURN BOX, RETAILS FOR $34.99 - NOW $26
• ACCEL SUPER STOCK 7mm WIRES - NEARLY FULL SET of (7) ACCEL SUPER STOCK WIRES for HEI IGNITIONS, 90deg BOOTS - NEW, NEVER RAN, STILL IN THE BOX - $20/all
• MSD 2-in-1 UNIVERSAL 8.5mm WIRES - FULL SET OF (8) MSD WIRES for HEI IGNITIONS, 90 deg BOOTS - NEW, NEVER RAN, STILL IN THE BOX (NO COVER) - P.N. MSD 31239 - $45/all
• 10" COIL WIRE - GOOD SHAPE, SOCKET END EACH SIDE - $2.50
• REBCO OIL TEMPERATURE SENDING UNIT - *NEW* IN THE PACKAGE - P.N. 140-1355, 275deg UNIT - $15
• ON BOARD YELLOW FLAG WARNING BOX - SAFE TRACK YELLOW WARNING LIGHT - MADE BY STS (SATELLITE TECHNOLOGY SYSTEMS) FORMERLY USED BY LAKE GENEVA SPEEDWAY, POSSIBLY USED BY OTHER TRACKS AS WELL - GOOD WORKING CONDITION - $50
• AUTOMETER PRO-COMP ULTA-LITE WATER TEMPERATURE GAUGE - P.N. ATM4331 - WORKS FINE - MINI 2 1/16" FACE - 100deg - 280deg - $25
• TURBO START VOLTAGE STEP-UP TRANSFORMER - STEP-UP MODULE ALLOWS RACERS USING ALTERNATORS TO RUN 16 VOLTS TO THE STARTER AND IGNITION - WHEN USED WITH THE 3 POST BATTERY, MODULE WILL ALLOW A 12 VOLT ALTERNATOR TO CHARGE A 16 VOLT BATTERY - *NEW* IN THE BOX - P.N. TRBTB16V - SPECIFICALLY DESIGNED FOR CHARGING 16V SYSTEMS - $50-SOLD

• TACHOMETERS
• AUTOMETER SPORT-COMP MONSTER 5" TACH W/SHIFT LIGHT - P.N. 3903, 10,000RPM, STD IGNITION, FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX, RETAILS FOR $167.99, NOW $135 (QTY of 2)
• AUTOMETER SPORT-COMP W/SHIFT LIGHT MONSTER TACH - P.N. ATM3904 - 10,000 RPM, STANDARD ELECTRIC TACH, PEDESTAL MOUNT, 5" FACE, FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX - RETAILS FOR $175.99, NOW $140 (QTY of 2) -BOTH SOLD
• AUTOMETER SPORT-COMP W/SHIFT LIGHT MONSTER TACH - P.N. ATM3904 - 10,000 RPM, STANDARD ELECTRIC TACH, PEDESTAL MOUNT, SHIFT-LITE BUILT INTO CONTROL SHIELD, 5" FACE, FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX - RETAILS FOR $164.99, NOW $135
• AUTOMETER PRO-COMP ULTRA-LITE RECALL MONSTER 5" TACH - P.N. ATM4494 - 10,000RPM, STD IGN - FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, ONLY MINOR WEAR DINGS IN THE BACK SIDE - STILL IN THE RETURN BOX, RETAILS FOR $244.99 - NOW $195 (QTY of 9)-SOLD (2), (7) LEFT
• AUTOMETER PRO-COMP SILVER MEMORY TACH, W/REMOTE DIAL - P.N. 6604, 10,000RPM, 3 3/4" TACH - WATER RESISTANT, STANDARD IGNITION - FACTORY REBUILT and SERVICED - BASICALLY NEW UNIT, STILL IN THE FACTORY NEW BOX - RETAILS FOR $215.99 - NOW $175-SOLD
• AUTOMETER SPORT-COMP RECALL MONSTER 5" TACH - P.N. ATM6809 - 9,000RPM, STD IGN - FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX, RETAILS FOR $199.99 - NOW $160 (QTY of 10)-SOLD (8), (2) LEFT
• AUTOMETER SPORT-COMP RECALL MONSTER 5" TACH - P.N. ATM6811 - 11,000RPM, STD IGN - FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX, RETAILS FOR $199.99 - NOW $160 (QTY of 5)-SOLD (2), (3) LEFT
• AUTOMETER SPORT-COMP RECALL MONSTER 5" TACH - P.N. ATM6821 - 11,000RPM, MAGNETO IGNITION - FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE RETURN BOX, RETAILS FOR $215.99 - NOW $175 (QTY of 2)-BOTH SOLD
• 
• AUTOMETER PRO-COMP MEMORY TACH W/REMOTE DIAL - P.N. 6601, 10,000RPM, 3 3/4" TACH - WATER RESISTANT, STANDARD IGNITION - FACTORY REBUILT AND SERVICED - BASICALLY NEW UNIT, STILL IN THE FACTORY NEW BOX, RETAILS FOR $207.99 - NOW $170 
• TACHOMETER MOUNT - GOOD SHAPE, MOUNTS PEDESTAL STYLE TACH TO 1 1/2" ROUND AT APPX 45deg ANGLE - STEEL CLAMP STYLE MOUNT - $5
• AUTOMETER PRO-COMP 2 ULTRA RECALL MONSTER 5" TACH - P.N. 4499, 10,000 ROM, STD IGN, IN DASH - DUAL RANGE W/MEMORY - FACTORY REPAIRED AND SERVICED WITH TOGGLE RECALL - VERY NICE UNIT, STILL IN THE RETURN BOX, RETAILS FOR $218.99 - NOW $155
• AUTOMETER PRO-COMP 5" MONSTER MEMORY TACH - P.N. 6802, 10,000 RPM, 5" TACH W/REMOTE RECALL, IN-DASH, MAGNETO IGNITION - FACTORY REBUILT AND SERVICED - EXCELLENT CONDITION UNIT, STILL IN THE FACTORY BOX, RETAILS FOR $249.99 - NOW $180
• AUTOMETER PRO-COMP SILVER MEMORY TACH, W/REMOTE DIAL - P.N. 6604, 10,000RPM, 3 3/4" TACH - WATER RESISTANT, STANDARD IGNITION - FACTORY REBUILT and SERVICED - MISSING THE RECALL PLATE - VERY NICE UNIT, STILL IN THE FACTORY NEW BOX - RETAILS FOR $215.99 - NOW $175

• STARTERS
• QUARTER MASTER DIRT STYLE REVERSE MOUNT STARTER, QM P.N. 114-170, TEETH IN VERY GOOD SHAPE, SPINS GOOD, GOOD SPARE - $125
• (2) AC DELCO CHEVY 168 TOOTH STARTER, NEW STARTER, OLD INVENTORY FROM WHEN WE HAD THE TRACKSIDE TRAILER, NO EXCHANGE NEEDED - $55/EA-SOLD (1), (1) LEFT
• QUARTER MASTER SBF BELL HOUSING MOUNT STARTER - FITS 157 TOOTH SBF 289, 302 and 351W APPLICATIONS - 3 and 4 SPEED M/T CUP TAKE OFF - STANDARD DUTY SUPER STARTER - 1.9HP (1.4Kw) QUARTER MASTER P.N. 114-300, CHECKS GOOD - VERY GOOD CONDITION - $155
• SBC BLOCK MOUNT STARTER - FITS 168 TOOTH SBC and BBC APPLICATIONS - STANDARD DUTY STARTER - STOCK CONFIGURATION, CHECKS GOOD - VERY GOOD CONDITION - $40
• TILTON SBC BLOCK MOUNT STARTER - FITS BLOCK MOUNT LOW GROUND CLEARANCE - 104 TOOTH SBC APPLICATIONS - STANDARD DUTY SUPER STARTER - 1.9HP, TILTON P.N. 54-10005, CHECKS GOOD - EXCELLENT CONDITION - $225
• TILTON SBC BLOCK MOUNT STARTER - FITS BLOCK MOUNT LOW GROUND CLEARANCE - 104 TOOTH SBC APPLICATIONS - STANDARD DUTY SUPER STARTER - 1.9HP, TILTON P.N. 54-10005, CHECKS GOOD - GOOD CONDITION - $200
• TILTON SBC REVERSE MOUNT LOW GROUND CLEARANCE TILTON UTGC 102 TOOTH SBC APPLICATIONS - SEVERE DUTY SUPER STARTER - 3HP (2.2Kw) - TILTON P.N. 54-21062, CHECKS GOOD - EXCELLENT CONDITION - $225-SOLD
• POWERMASTER BERT/BRINN STARTER - VERY GOOD SHAPE - USED for 1 1/2" SEASONS - FITS REVERSE MOUNT SET-UPS for BERT/BRINN, P.N. PWM9614 - $125
• HIGH PERFORMANCE MINI STARTER - UNKNOWN BRAND SBC 153/168 TOOTH MINI STARTER, USED ONLY 1 SEASON - EXCELLENT CONDITION, MACHINE SPUN PERMANENT MAGNET STYLE HOUSING - SEVERE DUTY 3HP VERSION - CHECKS GOOD - CAN ROTATE POSITION ON THE MOUNT - $125
• TILTON STYLE MOPAR REVERSE MOUNT STARTER - FITS 273-360cu. in. MOPAR APPLICATIONS - UNKNOWN SPECIFIC BRAND - MACHINE SPUN PERMANENT MAGNET STYLE HOUSING - SEVERE DUTY SUPER STARTER - 3HP (2.2Kw) - Similar to TILTON P.N. 54-10000 - CHECKS GOOD EXCELLENT CONDITION - $150
• QUARTER MASTER SBF BELL HOUSING MOUNT STARTER - FITS 153 TOOTH SBF 289, 302 and 351W APPLICATIONS - 3&4 SPEED M/T CUP TAKE OFF - STANDARD DUTY SUPER STARTER - 1.9HP (1.4Kw) - QUARTER MASTER P.N. 114-384, CHECKS GOOD - VERY GOOD CONDITION (will not fit stock 157 tooth applications) - $125 (QTY of 3)-SOLD (1), (1) LEFT
• QUARTER MASTER SBF BELL HOUSING MOUNT STARTER - FITS 153 TOOTH SBF 289, 302 and 351W APPLICATIONS - QUARTER MASTER P.N. 114-384 - $5 (QTY of 2)-BOTH SOLD
• QUARTER MASTER SBC BLOCK MOUNT STARTER - FITS 153 or 168 TOOTH SBC APPLICATIONS - STANDARD DUTY SUPER STARTER, 1.9HP (1.4Kw) - P.N. 114-280 - CHECKS GOOD - EXCELLENT CONDITION - REMOVED FROM A NATIONWIDE CAR - $140 (QTY of 3)-SOLD (1), (2) LEFT
• QUARTER MASTER SBC BLOCK MOUNT STARTER - FITS 153 or 168 TOOTH SBC APPLICATIONS - STANDARD DUTY SUPER STARTER, 1.9HP (1.4Kw) - P.N. 114-280 - LIKE NEW- DYNO TIME ONLY ON THIS ONE - REMOVED FROM A NATIONWIDE CAR - $150 

• CONTROL/SPARK BOXES (MSD ETC)
• HVC MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX - HVC (PROFESSIONAL RACE IGNITION), P.N. MSD 6600 - LOAD TESTED ON MSD EQUIPMENT, IN PERFECT WORKING ORDER, NEEDS A COUPLE OF END CONNECTORS, LISTS NEW FOR $375, NOW $125 (QTY of 5)-SOLD (3), (2) LEFT - REDUCED TO $125
• MSD SOFT TOUCH REV CONTROL *NEW* - P.N. 8738, NEW IN THE BOX with DIRECTIONS - TO BE USED with MSD 6T BOX - NEW WAS $86 - NOW $70-SOLD
• MSD SOFT TOUCH REV CONTROL - P.N. 8738, NICE SHAPE - MSD MACHINE TESTED, WORKS GREAT, NICE SPARK - LIKE NEW UNIT - TO BE USED WITH MSD 6T BOX - $50-SOLD
• MSD SOFT TOUCH REV CONTROL - P.N. 8738, NICE SHAPE - MSD MACHINE TESTED, WORKS GREAT, NICE SPARK - OLDER LOOKING UNIT - TO BE USED WITH MSD 6T BOX - $40-SOLD
• MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX 6T, MSD P.N. 6400 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - NEEDS A COUPLE OF END CONNECTORS - $95-SOLD
• MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX 6T, OLDER MSD PART NUMBER 6446 - LOAD TESTED ON MSD EQUIPMENT IS PERFECT WORKING ORDER - NEEDS A COUPLE OF END CONNECTORS - $95 (QTY of 2)
• MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX 6A, MSD P.N. 6200 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - NEEDS A COUPLE OF END CONNECTORS - $95 (QTY of 4)-SOLD (2), (2) LEFT
• MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX 6AL, MSD P.N. 6420 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - NEEDS A COUPLE OF END CONNECTORS - $120 (QTY of 3)-SOLD (2), (1) LEFT
• MSD IGNITION CONTROL BOX - MSD SPARK CONTROL BOX 5, MSD P.N. 5200 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - UGLY LOOKING WITH SOME PEELING PAINT FROM AGE - NEEDS A COUPLE OF END CONNECTORS - $55-SOLD
• HVC MSD IGNITION CONTROL BOX AND COIL - MSD SPARK CONTROL BOX - HVC (PROFESSIONAL RACE IGNITION) - P.N. MSD 6600 WITH MATCHING HVC COIL, P.N. MSD 8250 - LOAD TESTED ON MSD EQUIPMENT IN PERFECT WORKING ORDER - NEEDS A COUPLE OF END CONNECTORS - COMBO LISTS NEW FOR OVER $500 - NOW $175-SOLD
• MSD BLASTER COIL - HIGH VIBRATION COIL, P.N. 8222 - MSD MACHINE TESTED, WORKS GREAT - $30-SOLD

• DISTRIBUTORS
• MSD PRO BILLET DISTRIBUTOR - MSD P.N. MSD 8355, MACHINE TESTED IN VERY GOOD CONDITION, NICE BRASS GEAR - COMPLETE WITH NICE CAP-ADAPT CAP and ROTOR WITH DUAL PICK-UP WITH LOCKED ADVANCE - $250
• FORD MSD PRO BILLET DISTRIBUTOR - MSD P.N. 85821, ONLY HAS DYNO TIME - CAME WITH A 347CI CRATE ENGINE, BUT WOULD NOT FIT UNDER THE HOOD - DISTRIBUTOR HAS BEEN ROUGHED UP A BIT AND NOW HAS LOCK OUT ADVANCE AND THE WEIGHTS ARE MISSING AND THE ADVANCE BUSHING STUD IS BROKEN OFF - COMPLETE WITH NEW ADAPT-A-CAP AND ROTOR - WORKS LIKE NEW, STILL IN THE BOX - $150
• MSD PRO BILLET DISTRIBUTOR - MSD P.N. MSD 8555, MACHINE TESTED IN VERY GOOD CONDITION, NICE STEEL GEAR, WIDE CAP - COMPLETE WITH NICE SOCKET CAP AND ROTOR WITH "SPARE" CONDITION MSD 8.5mm MSD RACE WIRES (90deg ENDS) - $195-SOLD

ENGINE &  ACCESSORIES

• PAIR OF USED FRONT MOTOR MOUNTS - $10
• SBC STOCK 400 HARMONIC BALANCER - $10
• PAIR OF STEEL FRONT MOTOR MOUNTS - $10
• PAIR of FACTORY SOLID LOWER MOTOR MOUNTS, GM VEHICLES - $25/PR
• ALUMINUM MID-PLATE, NICE CONDITION COPY OF AN AFCO MID-PLATE, FITS OLDER LEFT 2" OFFSET ENGINE APPLICATIONS - $20
• UB MACHINE CHEVY MID-PLATE - EXCELLENT CONDITION, DOES NOT LOOK TO HAVE BEEN INSTALLED, P.N. 50-0100, STANDARD CHEVY 2 5/8" OFFSET - $49
• PAIR of GM/CHEVY STOCK STYLE BLOCK MOUNT MOTOR MOUNTS - SBC - NICE CONDITION, BLASTED AND PAINTED - $20/pr (QTY of 2)
• PAIR OF GM/CHEVY STOCK STYLE BLOCK MOTOR MOUNT MOTOR MOUNTS, SBC UPPERS AND LOWERS. NICE CONDITION, GOOD RUBBER LOWERS, BLASTED AND PAINTED. - $30/PR
• STREET STOCK LOWER MOTOR MOUNTS - SHORT PROFILE STEEL MOUNTS WITH 1/4" THICK ALUMINUM SPACERS - $15/pr
• (5) GRINER MODIFIED MIDPLATES, *NEW* SIMPLE DESIGN PLATE, 1/8" THICK STEEL FOR SBC - $5/EA-SOLD (1), (4) LEFT
• SINGLE STEEL SBC FRONT MOTOR MOUNT - GOOD CONDITION - $5
• SBC IMCA MODIFIED ALUMINUM MIDPLATE - SPEEDWAY STYLE MIDPLATE - P.N. 917-11668, CHEVY STYLE, FITS SHAW and LARKINS MODIFIEDS - GOOD CONDITION - NO CRACKS or BENDS - $35-SOLD
• CHEVY MOROSO DISTRIBUTOR SHIM KIT - *NEW* IN THE PACKAGE - P.N. MOR26150 - $3.50
• PAIR of GM/CHEVY STOCK STYLE BLOCK MOUNT MOTOR MOUNTS SBC - NICE CONDITION, BLASTED AND PAINTED FACTORY "CLAM SHELL" STYLE - $25/pr
• SBC FRONT MOTOR MOUNT - SINGLE - GOOD CONDITION FLAT 1/4" STEEL - $5
• AFCO ALUMINUM MIDPLATE - OLDER VERSION of AFCO MIDPLATE P.N. 80665 - 27 1/2" WIDE, 12 1/8" FROM THE LEFT CENTER - 1 5/8" OFFSET - CHEVY STYLE - GOOD CONDTION, NO DAMAGE - $35
• SBC REAR MOTOR MOUNTS - NICE SHAPE - BLACK POWDER COATED - $12/pr
• OFFSET ALUMINUM SBC FRONT MOTOR MOUNTS - MOUNTS 2" or 3 3/8" BACK ON SAME PLATE - NICE SHAPE - BLOCK MOUNT/FLAT PLATE STYLE - $25/pr
• SBC FRONT MOTOR MOUNTS - ALLSTAR STYLE - NICE SHAPE - BLACK PAINTED - BLOCK MOUNT/FLAT PLATE STYLE - $10/pr
• SBC REAR MOTOR MOUNTS - O.K. USED SHAPE - SLIGHTLY TWEAKED - EASY FIX - PAINTED BLACK - $5/pr
• 1/4" STEEL MOTOR MOUNT SPACERS - TRIMMED STEEL for SPACERS for SBC - CONTAINS ALL (3) MOUNTING HOLES AND DOWEL PIN ON THE BACK of THE BLOCK (FITS BETWEEN THE BLOCK AND THE BELL) - $15/pr
• PAIR of GM/CHEVY STOCK STYLE BLOCK MOUNT MOTOR MOUNTS SBC - NICE CONDITION, BLASTED AND PAINTED FACTORY "CLAM SHELL" STYLE - $20/pr (QTY of 2)
• AFCO STYLE ALUMINUM MIDPLATE - CHAMP BRACKETS BRAND ALUMINUM MIDPLATE 27 ½”WIDE, 12” FROM THE LEFT CENTER 1 ¾” OFFSET - CHEVY STYLE - EXCELLENT CONDITION, NO DAMAGE - NICE AND FLAT - $30-SOLD
• SBC PATHFINDER LATE MODEL STEEL RIGHT REAR MOTOR MOUNT - USED ON ALL '01 AND NEWER PATHFINDER LATE MODELS - EXCELLENT SHAPE - FLAT BLACK - P.N. 025-034 - FLAT PLATE STYLE WITH BULKHEAD OIL LINE HOLES - $15
• SBC PATHFINDER LATE MODEL STEEL RIGHT REAR MOTOR MOUNT - USED ON ALL '01 AND NEWER PATHFINDER LATE MODELS - EXCELLENT SHAPE - ZINC PLATED SILVER - P.N. 025-034 - FLAT PLATE STYLE WITH BULKHEAD OIL LINE HOLES - AEROQUIP ALUMINUM BULKHEADS INSTALLED - $25
• OFFSET STEEL SBC FRONT MOTOR MOUNTS - MOUNTS 1" BACK - MOCKED UP, NEVER RACED - BLOCK MOUNT/FLAT PLATE STYLE - P.N. 032-3621 - $15/pr
• PAIR of GM CHEVY STOCK STYLE FRAME MOUNT LOWER SBC FRONT MOTOR MOUNTS - NICE CONDITION, BLASTED AND PRIMED - UNSURE of EXACT APPLICATION, MATCH MOROSO UPPER BLOCK MOUNTS, P.N. 62500 WELL - MOUNT MEASURES ABOUT 1 1/2" FROM THE BASE TO THE CL of the THROUGH BOLT HOLE - A COUPLE MINOR TORCH NICKS, BUT OTHERWISE FINE - $25 (QTY of 4)

• VALVE COVERS
• SINGLE LEFT SIDE ALUMINUM VALVE COVER, NO NAME BRAND COVER, FAIR SHAPE - $25
• M/T ALUMINUM VALVE COVERS - SLIGHTLY MODIFIED MICKEY THOMPSON ALUMINUM VALVE COVERS FOR SBC PUSH-IN BREATHERS ON EACH SIDE, FRONT SIDE INTERNAL BAFFLES ALSO ADDED - VERY GOOD CONDITION COVERS - $65/pr
• MOROSO STYLE ALUMINUM VALVE COVERS - CIRCLE TRACK RACING ALUMINUM VALVE COVERS for SBC - similar to MOROSO P.N. 68370 - BREATHER TUBE ON LEFT SIDE - FRONT TUBE EPOXIED TIGHT and PVC HOLE ON THE LEFT - OTHERWISE VERY GOOD CONDITION VALVE COVERS - $65/pr
• SBC COMPOSITE VALVE COVERS - EXCELLENT CONDITION, APPEAR TO BE NEW AND ONLY SHELF WORN - KNOCK OUTS ARE STILL INTACT, NO HOLES PUNCHED OR DRILLED IN THESE - NICE LIGHT WEIGHT COVERS - $125/pr
• WORLD PRODUCTS CAST ALUMINUM VALVE COVERS - EXCELLENT CONDITION WORLD PRODUCTS VALVE COVERS WITH "SPORTSMAN II" EMBOSSED ACROSS THE TOP - $95
• FRONT VALVE COVER BREATHER CROSS-OVER TUBE - 1 3/8" O.D. ALUMINUM TUBE - MINOR DENTS AND DINGS - USED TO PUT TWO BREATHERS ACROSS THE FRONT - $10
• PAIR of SHIELDED VALVE COVER BREATHERS - *NEW*, IN THE BOXES - 1 3/8" HOLE - $15/pr
• EDELBROCK SBF ELITE SERIES VALVE COVERS - OLDER PAIR of 289, 302 and 351W ELITE SERIES VALVE COVERS - LIGHT PITTING AND MAJOR BUBBLING ALONG THE BOTTOM FACES FROM AGE (GASKET SURFACES NICE) LOOK NICE FROM A COUPLE FEET AWAY, CHEAP AT $30-SOLD
• STEEL SBC CIRCLE TRACK VALVE COVERS - GOOD USED PAIR of GOLD ANODIZED VALVE COVERS for SBC - NO DENTS or PROBLEMS, JUST FRONT LIP OF ONE GROUND FOR ALTERNATOR CLEARANCE - ECONO SET - $12/pr

• ROCKER ARMS/ROCKER STUDS/GUIDE PLATES AND ACCESSORIES
• SET OF 16 "WIDE BODY" POLY LOCKS - $10
• SET OF 16 SHOULDERED ROCKER ARM STUDS - 7/16", GOOD USED SET, PRIME FOR A CLAIMER ENGINE - $10/SET
• SET OF 8 GUIDE PLATES FOR SBC, GOOD USED SET, PRIME FOR A CLAIMER ENGINE, STEPPED SET - $10/SET
• SET OF 8 GUIDE PLATES FOR SBC, ALMOST NEW SET, PRIME FOR A CLAIMER ENGINE, STEPPED SET - $12/SET
• SCORPION ROLLER ROCKERS - SCORPION BRAND (ALUMINUM, WIDE BODY) SBC 1.5 RATIO, 7/16" STUD, MISSING LOCK NUTS - COMPLETE SET of 16, GOOD SHAPE - LOOK and FEEL LIKE NEW - $100
• 1/2 SET of GM CRATE ENGINE ROLLER ROCKERS - GM PERFORMANCE PARTS BRAND - P.N. 12370838, SELF-ALIGNING (ALUMINUM, NARROW BODY) SBC 1.5 RATIO, 3/8" STUD, INCLUDES LOCK NUTS - 1/2 SET of 8, *NEW* IN THE BOX - $150
• CRANE ROLLER ROCKERS - CRANE BRAND (ALUMINUM WIDE BODY) SBC 1.5 RATIO, 7/16" STUD, INCLUDING LOCK NUTS - HALF SET of 8, DECENT SHAPE, SHOWING SOME AGE - $50
• HARLAND SHARP ROLLER ROCKERS - HARLAND SHARP BRAND (ALUMINUM, WIDE BODY) SBC 1.5 RATIO, 7/16" STUD, INCLUDING LOCK NUTS - HALF SET of 8, GOOD SHAPE, LOOK AND FEEL LIKE NEW - $50
• 3/8" POLYLOCKS - ROCKER ARM ADJUSTERS - PIONEER BRAND POLY LOCKS WITH LOCKS *NEW* COMPLETE IN THE PACKAGE - PIONEER P.N. S-1010 - $20
• CRANE CAMS COOL NUTS LOCK NUTS - COMPLETE SET of (16) COOL NUTS POLY LOCKS - FITS 3/8" STUD W/JAMS - P.N. CRN99770-16 - $12
• PARTIAL SET of GM CRATE ENGINE ROLLER ROCKERS - GM PERFORMANCE PARTS BRAND - P.N. 12370838, SELF-ALIGNING (ALUMINUM, NARROW BODY) SBC 1.5 RATIO, 3/8" STUD, INCLUDES LOCK NUTS - LOOSE SET of 6, *NEW* IN THE BOX - $100
• SBC ALUMINUM STUD GIRDLE - RAIL INCLUDING 3/8" LOCK NUTS PURCHASED FROM COMPETITION PRODUCTS - $75
• SBF ALUMINUM STUD GIRDLE - PAIR of ALUMINUM STUD GIRDLE RAILS - MISSING LOCK NUTS - PURCHASED FROM COMPETITION PRODUCTS - FITS 289, 302 and 351W - $65
• SBC STUD GIRDLE WITH LOCK NUTS, COMPLETE ASSEMBLY OF JOMAR BRAND STUD GIRDLE WITH JAM NUTS, FOR 283-400 CU. IN SBC, - $60
• SET of 16 SHOULDERED ROCKER ARM STUDS - 7/16" - GOOD USED SET, PRIME FOR A CLAIMER ENGINE - $10/set
• 3/8" POLYLOCKS - ROCKER ARM ADJUSTERS - POLY LOCKS WITH LOCKS - VERY GOOD CONDITION W/.745" BODY - FULL SET of 16 - $15/set
• CRANE CAMS ROLLER ROCKERS - BBC - CRANE CAMS BRAND (ALUMINUM, WIDE BODY, GOLD ANODIZED) BBC 1.7 RATIO, 7/16" STUD, INCLUDING LOCK NUTS - COMPLETE SET of 16, GOOD SHAPE - LOOK AND FEEL in VERY GOOD CONDITION - $95-SOLD
• SCORPION ROLLER ROCKERS - BBC - SCORPION BRAND (ALUMINUM, WIDE BODY, RED ANODIZED) - BBC 1.7" RATIO, 7/16" STUD, INCLUDING LOCK NUTS - COMPLETE SET of 16, GOOD SHAPE - LOOK AND FEEL in VERY GOOD CONDITION - $95-SOLD
• CAM DYNAMICS BRAND (ALUMINUM, WIDE BODY, NATURAL FINISH) - SBC RATIO, 3/8" STUD, INCLUDING LOCK NUTS - COMPLETE SET of 16, GOOD SHAPE - LOOK AND FEEL in GOOD CONDITION - $95

• AIR FILTERS/AIR BOXES
• NEW!! NAPA RACING AIR FILTERS (PART NO. 6942R) $4 EACH OR 5 FOR $15 (SIZE 16" X 14")
• K&N AIR FILTER, NEW IN THE BOX, PART NO. KNEE3760, 14" X 6" FILTER - $35
• K&N FLOW CONTROL UNIT - K&N FLOW CONTROL UNIT FOR QUADRAJET 4 BARREL APPLICATIONS, MISSING ELEMENT, BUT, TOP/BOTTOM/HARDWARE ALL COMPLETE - GOOD CONDITION HOUSING, MINOR MOUNTING HOLES DRILLED IN IT. ALSO THE CENTER FLOW STEM TRIMMED FOR MORE CFM - SIMILAR to P.N. 61-4000, BUT WITH A Q-JET BASE - $40
• 16" AIR BOX AIR FILTER ASSEMBLY - CUP TAKE-OFF, ALUMINUM TOP, CARBON FIBER BOTTOM. COVERED SIDES WITH 3" DUCTING CHANNELING IN, EACH SIDE - INCLUDES (6) NEW RACING FILTERS - $85
• FIVE STAR FIBERGLASS MODIFIED AIR BOX ASSEMBLY - COMPLETE 14" AIR BOX ASSEMBLY FOR COWL COLD AIR INDUCTION - FITS 14" DIA, USES 3" TALL AIR CLEANER ELEMENT - MADE BY FIVE STAR BODIES - BOTTOM HAS BEEN CUT OUT TO USE STANDARD AIR CLEANER BOTTOM - MINOR TRIMS AND CUTS TO FIT LAST APPLICATION - INCLUDES MODIFIED COWL TRAY - $65
• K&N WASHABLE FILTER, 12"x2.5", P.N. E-1450, NEW IN THE BOX - $25
• ALUMINUM AIR BOX - USED ALUMINUM AIR BOX, COWL INDUCTION STYLE SIMILAR TO LEFTHANDER P.N. 002-E156 WITH 14" TOP - $40
• ALUMINUM AIR BOX - USED LEFTHANDER ALUMINUM AIR BOX, LEFTHANDER P.N. 002-E156 WITH 14" TOP - $45
• SPUN ALUMINUM AIR FILTER BASE, OFFSET FOR 2BBL APPLICATIONS, 14" - $20-SOLD
• K&N FLOW CONTROL UNIT - K&N FLOW CONTROL UNIT FOR HOLLEY 4 BARREL APPLICATIONS, MISSING ELEMENT, BUT, TOP/BOTTOM/HARDWARE ALL COMPLETE, GOOD CONDITION HOUSING, P.N. 61-4000 - $55
• K&N 6" TALL AIR CLEANER, PART NO. KNEE-3770, USED 1/2 SEASON - $25
• K&N 5" TALL AIR CLEANER, PART NO. KNEE-3760, USED 1/2 SEASON - $25
• 14" SPUN ALUMINUM AIR FILTER BOTTOM, WITH 1" SURE SEAL - $15
• NASCAR STYLE CARBON FIBER AIR BOX ASSEMBLY - COMPLETE 16" AIR BOX ASSEMBLY FOR COWL COLD AIR INDUCTION - FITS 16" DIA, USES 3" TALL AIR CLEANER ELEMENT - MADE BY CRAWFORD COMPOSITES - $125 (QTY of 4)
• NEW K&N RE-USABLE BREATHER, NEW K&N RE-USABLE BREATHER, NON-SHIELDED, PUSH ON STYLE WITH 2" DIAMETER HOLE, GOOD FOR REAR-END BREATHER - $5
• CHROME AIR FILTER ASSEMBLY W/5" K&N ELEMENT - 14" CHROME TOP & BOTTOM, FITS 4BBL APPLICATIONS - GOOD USED CONDITION, MINOR DENTS ON BOTTOM HALF - DECENT USED 5" TALL ELEMENT - $20
• K&N AIR FILTER CLEANER - NEW, NEVER USED 12oz BOTTLE - K&N P.N. KNE99-0606 - $5
• ALUMINUM AIR BOX ASSEMBLY - GOOD USED CONDITION ALUMINUM BOX WITH 16" K&N FLOW CONTROL for a QUADRAJET 4 BARREL CARB - REMOVED FROM A FEATURE WINNING SUPER STOCK - INCLUDES USED K&N WASHABLE AIR FILTER - $115
• CARBON FIBER AIR BOX ASSEMBLY - COMPLETE 16" AIR BOX ASSEMBLY for COWL COLD AIR INDUCTION - FITS 16" DIA, 4" TALL ELEMENT - $125
• NASCAR STYLE CARBON FIBER AIR BOX ASSEMBLY - COMPLETE 16" AIR BOX ASSEMBLY FOR COWL COLD AIR INDUCTION - FITS 16" DIA, USES 3" TALL AIR CLEANER ELEMENT - MADE BY CRAWFORD COMPOSITES - $125 (QTY of 4)
• K&N AIR FILTER X-STREAM FLOW 14" TOP - USED ON AN ASPHALT SPORTSMAN - GOOD CONDITION TOP - $35
• CHROME AIR FILTER ASSEMBLY - 14" EDELBROCK STYLE CHROME TOP & BOTTOM, FITS 4BBL APPLICATIONS - GOOD USED CONDITION, NO MAJOR DENTS, BUT MINOR DINGS AND PEELING CHROME - GOOD ECONOMY ASSEMBLY - $5
• HOLLEY 4 BARREL PLASTIC HOUSING for REMOTE FILTER - TOP PLASTIC HOUSING MOUNTS TO THE TOP of A HOLLEY 4 BARREL CARB TO A 4" DIA HOSE for REMOTE AIR CLEANER - $15
• CHROME AIR FILTER ASSEMBLY - 14" EDELBROCK STYLE CHROME TOP & BOTTOM, FITS 4 BBL APPLICATIONS - GOOD USED CONDITION, NO MAJOR DENTS, BUT MINOR DINGS AND PEELING CHROME - GOOD ECONOMY ASSEMBLY - $10
• 14" K&N AIR FILTER X-STREAM FLOW AIR FILTER ASSEMBLY - X-STREAM TOP, P.N. 66-1401, 4" TALL WASHABLE ELEMENT, P.N. 3750 and K&N DEFLECTOR SHIELD, P.N. 54400 - ASSEMBLY RETAILS for $150 - USED ON AN ASPHALT MODIFIED - EXCELLENT CONDITION - $95
• 14" K&N AIR FILTER W/ALUMINUM AIR BOX - FLOW AIR FILTER ASSEMBLY - CHROME MOROSO TOP, SPUN ALUMINUM BOTTOM, 4" TALL WASHABLE ELEMENT, P.N. 3750 - ALUMINUM COWL INDUCTION AIR BOX - ASSEMBLY RETAILS for $125 - USED ON AN ASPHALT SPORTSMAN - VERY GOOD CONDITION - $75
• FIVE STAR FIBERGLASS AIR BOX TOP - 14" AIR BOX ASSEMBLY TOP FOR COWL COLD AIR INDUCTION - FITS 14" DIA, USES 3" TALL AIR CLEANER ELEMENT - MADE BY FIVE STAR BODIES - *NEW* FIBERGLASS TOP ONLY - $75
• FIVE STAR FIBERGLASS COWL PANEL AIR INLET - ADJUSTABLE AIR INLET - WAS WHITE PAINTED BLACK - P.N. 661-5100A - TRIMMED A BIT TO FIT - REMOVED FROM A CAR - $15
• FIVE STAR FIBERGLASS COWL PANEL AIR DEFLECTOR - AIR DEFLECTOR ONLY - BLACK IN COLOR - P.N. 000-5100A - TRIMMED A BIT TO FIT - REMOVED FROM A CAR - $15
• K&N FLOW CONTROL UNIT - K&N FLOW CONTROL UNIT - FOR HOLLEY 4 BARREL APPLICATIONS - MISSING ELEMENT, BUT TOP/BOTTOM ALL THERE - NEEDS MOUNTING STUD - GOOD CONDITION HOUSING, MINOR MOUNTING HOLES DRILLED IN IT AROUND THE BOTTOM LIP - THE BOTTOM ALSO HAS BEEN TRIMMED AROUND THE OUTER LIP TO FIT TO AN AIR BOX AT ONE TIME - ALSO COMES WITH A SPARE TOP FOR HOLLEY 2BBL APPLICATIONS - ORIGINALLY P.N. 61-4000 - $40
• SPUN ALUMINUM AIR FILTER ASSEMBLY - 14" SPUN ALUMINUM TOP & CHROME BOTTOM - FITS 4 BBL APPLICATIONS - DECENT USED CONDITION - MINOR DENTS, DINGS AND HOLES - DRILLED FOR MOUNTING - CHEAP ASSEMBLY - $10
• MOROSO OFFSET AIR FILTER ASSEMBLY for TWO BARREL HOLLEY - 14" GOLD ANODIZED TOP & BOTTOM - FITS 2 BBL APPLICATIONS WITH 1 3/4" DROP - VERY GOOD CONDITION, MISSING STUD - GOLD VERSION OF P.N. 65925 - $25
• K&N FLOW CONTROL UNIT FOR QUADRAJET 4 BARREL APPLICATIONS - MISSING ELEMENT, HARDWARE AND CENTER STEM - SIMILAR to P.N. 61-4000, BUT WITH A Q-JET BASE - NICE USED K&N TOP AND BOTTOM - $30
• NASCAR STYLE CARBON FIBER CARBURETOR AIR BOX BASE - 14" AIR BOX - BASE ONLY - FOR COWL COLD AIR INDUCTION - FITS 14" DIA, USES 3" TALL AIR CLEANER ELEMENT - MADE BY ROUSH - STD 7deg BOTTOM IN NICE SHAPE - P.N. STRD BA-0265 - $35

RIMS & TIRES & MISC.

• 13x6, 14x6, 15x7, ODD SIZE SMALLER RIMS
• BART STEEL 5x4 3/4" - 15x7 RACING RIM - 2" BACK SPACING - STANDARD CIRCLE HOLE STYLE, WEIGHS 24#, BLACK POWDER COATED - LIKE NEW CONDITION WITH NO CREASES or SCUFFS - $25 (QTY of 4)-SOLD ALL (4)
• BART STEEL 5x4 3/4" - 15x7 RACING RIM - 2" BACK SPACING - STANDARD BART CIRCLE HOLE STYLE, WEIGHS 24#, OLD CHIPPING BLACK PAINT - FAIR/HEAVY CONDITION WITH NO CREASES or SCUFFS - $15-SOLD
• BART STEEL 5x4 3/4" - 15x7 RACING RIM - 2" BACK SPACING - STANDARD BART CIRCLE HOLE STYLE, WEIGHS 27#, OLD CHIPPING BLACK PAINT - FAIR/HEAVY CONDITION WITH NO CREASES or SCUFFS - $15-SOLD

• 15"x8" 5x4 1/2" RIMS
• AERO STEEL BEAD LOCK 5x4 1/2" RACING RIM - 15x8, 2" BACK SPACING, 5x4 1/2" BOLT PATTERN, STANDARD STYLE, CURRENT IMCA STICKER, POWDER COAT SILVER WITH YELLOW RING - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS  - $75
• BART STEEL 5x4 1/2" RACING RIM - 15x8, 3" BACK SPACING, 5x4 1/2" BOLT PATTERN, STANDARD BART CIRCLE HOLE PATTERN - IMCA STICKER - BLACK POWDER COAT - LIKE NEW CONDITION WITH NO CREASES OR SCUFFS - *NEW* INSTALLED, BUT NEVER RAN - $35
• BART STEEL 5x4 1/2" RACING RIM - 15x8, 3" BACK SPACING, 5x4 1/2" BOLT PATTERN, STANDARD BART CIRCLE HOLE PATTERN - IMCA STICKER - BLACK POWDER COAT - LIKE NEW CONDITION WITH NO CREASES OR SCUFFS - SLIGHT SURFACE RUST AROUND THE LUG NUT AREA - *NEW* INSTALLED, BUT NEVER RAN - $30

• 15"x8" 5x4 3/4" RIMS
• BASSETT BEAD LOCK 5x4 3/4" OLDER RACING RIM - 15x8, 4" BACK SPACING, 5x4 3/4" BOLT PATTERN - OLDER, NO IMCA STICKER - DECENT OLDER CONDITION WITH NO MAJOR CREASES OR SCUFFS - PAINTED SILVER W/BLUE RING - $55
• AERO STEEL 5x4 3/4" RACING RIM - 15x8, 4" BACK SPACING, STANDARD EXCEL CIRCLE HOLE STYLE, current IMCA STICKER, BLACK POWDER COATED - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $20-SOLD
• BASSETT EXCEL STEEL 5x4 3/4" RACING RIM - 15x8, 4" BACK SPACING, STANDARD CIRCLE HOLE EXCEL STYLE, no IMCA STICKER, BLACK POWDER COAT - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $20-SOLD
• AERO STEEL 5x4 3/4" RACING RIM - 15x8, 3" BACK SPACING, BLACK POWDER COAT, STANDARD D-HOLE STYLE, no IMCA STICKER, 25#, GOOD CONDITION WITH (1) SMALL RIPPLE - $20
• DIAMOND STEEL 5x4 3/4" RACING RIM - 15x8, 5" BACK SPACING, ROUND HOLE STYLE, BLACK POWDER COAT, no IMCA STICKER, 20#, VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $25
• DIAMOND STEEL 5x4 3/4" RACING RIM - 15x8, 5" BACK SPACING, ROUND HOLE STYLE, BLACK POWDER COAT, no IMCA STICKER, 20#, VERY GOOD CONDITION WITH ONE SMALL CREASE - $20
• DIAMOND STEEL 5x4 3/4" RACING RIM - 15x8, 5" BACK SPACING, DIAMOND HOLE STYLE, BLACK POWDER COAT, no IMCA STICKER, 20#, VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $25
• DIAMOND STEEL 5x4 3/4" RACING RIM - 15x8, 5" BACK SPACING, DIAMOND HOLE STYLE, BLACK POWDER COAT, no IMCA STICKER, 20#, GOOD CONDITION WITH (2) SMALL RIPPLES - $20
• BART STEEL 5x4 3/4" RACING RIM - 15x8, 4" BACK SPACING, ROUND HOLE STYLE, DECENT BLACK POWDER COAT, WEIGHS 26 LBS, VERY GOOD CONDITION WITH ONLY (1) CREASE - $20
• BART STEEL 5x4 3/4" RACING RIM - 15x8, 2" BACK SPACING, STANDARD BART ROUND HOLE STYLE, OLDER BLACK POWDER COAT, WEIGHS 25#, FAIR/HEAVY CONDITION WITH (1) RIPPLE ON THE OUTER FACE - $15-SOLD

• 15"x8" 5x5" RIMS
• DIAMOND STEEL 5x5 RACING RIM - 15"x8", 3" BACK SPACING, DOUBLE CENTER, 21.5#, NO CREASES OR BENDS - $20
• AERO STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE STYLE, current IMCA STICKER, WEIGHS 19#, OLDER SILVER PAINT - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $20 (QTY of 2)-SOLD (1), (1) LEFT
• AERO STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE STYLE, no IMCA STICKER, WEIGHS 17#, OLDER SILVER PAINT - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $15 (QTY of 2)-SOLD (1), (1) LEFT
• BASSETT STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD DIAMOND STYLE HOLES, current IMCA STICKER and WISSOTA STAMP, WEIGHS 19#, OLDER SILVER POWDER COAT - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $20
• DIAMOND CHROME 5x5 RACING RIM - 15x8, 4" BACK SPACING, ROUND HOLE STYLE, current IMCA STICKER and WISSOTA STAMP, DECENT CHROME - DECENT CONDITION WITH A SMALL SCUFF AROUND THE OUTER LIP - $25
• DIAMOND STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD CIRCLE HOLE STYLE, no IMCA STICKER, WEIGHS 25#, PEELING FLAT BLACK FINISH - FAIR CONDITION WITH MINOR CREASES AND SCUFFS - $5-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x8, 5" BACK SPACING, STANDARD D-HOLE STYLE, CURRENT IMCA STICKER - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $30-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE STYLE, no IMCA STICKER, WEIGHS 17#, W/BLEEDER AND EXTRA HOLE DRILLED IN SHELL - GOOD CONDITION WITH NO CREASES OR SCUFFS - $15
• AERO STEEL 5x5 RACING RIM *NEW* - 15x8, 2" BACK SPACING, STANDARD D-HOLE, WEIGHS 23#, NEW SILVER POWDER COAT - *NEW* OLD INVENTORY, JUST PULLED OUT OF THE BOX - $45
• BASSETT EXCEL BEADLOCK 5x5 RACING RIM - 15x8, 2" BACK SPACING, STANDARD EXCEL STYLE, IMCA STICKER, DECENT CONDITION WITH NO MAJOR CREASES OR SCUFFS, MINOR SURFACE RUST, SILVER POWDER COAT - $55-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x8, 2" BACK SPACING, BLACK POWDER COAT, STANDARD D-HOLE STYLE, IMCA STICKER, EXCELLENT CONDITION WITH NO CREASES or SCUFFS - $40 (QTY of 4)-SOLD ALL (4)
• BART CHROME 5x5 RACING RIM - 15x8, 5" BACK SPACING, STANDARD D-HOLE STYLE, IMCA STICKER, VERY GOOD CONDITION WITH NO CREASES or SCUFFS - $45
• BASSETT INERTIA STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, SILVER POWDER COAT, STANDARD INERTIA STYLE, IMCA STICKER, NEW CONDITION WITH NO CREASES OR SCUFFS - $50-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x8, 1" BACK SPACING, STANDARD D-HOLE STYLE, IMCA STICKER, SILVER POWDER COAT, EXCELLENT CONDITION WITH NO CREASES or SCUFFS - $35 (QTY of 2)-BOTH SOLD
• DIAMOND STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD DIAMOND HOLE STYLE, IMCA STICKER, 19#, BLACK POWDER COAT - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $25-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE PATTERN, WEIGHS 17#, ASPHALT DESIGN, BLACK POWDER COATED - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $30 (QTY of 2)-SOLD (1), (1) LEFT
• DIAMOND CHROME 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD DIAMOND-HOLE PATTERN, WEIGHS 20#, CHROME - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $45-SOLD
• AERO CHROME 5x5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE PATTERN, IMCA STICKER - CHROME - GOOD CONDITION WITH ONE SMALL CREASE - $40
• 
• AERO CHROME 5x5 BEADLOCK RACING RIM - 15x8, 4" BACK SPACING, STANDARD D-HOLE STYLE WITH CLEAR PLASTIC MUD SHIELD - NO CREASES or BENDS, CURRENT IMCA STICKER, WISSOTA STAMP - INCLUDES MOUNTED IMCA LEGAL TIRE G60-15 (tapes out at 82.5") - ASSEMBLY ONLY USED 2 NIGHTS, EXCELLENT TREAD - $155
• BASSETT POWDER COATED 5x5 BEADLOCK RACING RIM - 15x8, 3" BACK SPACING, STANDARD D-HOLE STYLE - SILVER POWDER COAT - NO CREASES or BENDS, CURRENT IMCA STICKER, WISSOTA STAMP - INCLUDES MOUNTED IMCA LEGAL TIRE G60-15 (tapes out at 83 1/4") - ASSEMBLY ONLY USED 1 NIGHT, STILL HAS THE LITTLE KNOBS ON THE TREAD - $125
• BASSETT STEEL 5x5 RACING RIM - 15x8, 5" BACK SPACING, STANDARD D HOLE STYLE, no IMCA STICKER, 17.5#, SILVER POWDER COAT -  GOOD CONDITION WITH NO CREASES OR SCUFFS - $25
• BASSETT STEEL 5x5 RACING RIM - 15x8, 2" BACK SPACING, INERTIA STYLE, IMCA STICKER and WISSOTA STAMP, 19#, SILVER POWDER COAT - GOOD CONDITION WITH A MINOR REPAIRED CREASE AROUND THE LIP - $35
• BASSETT STEEL 5x5 RACING RIM - 15x8, 3" BACK SPACING, INERTIA STYLE, IMCA STICKER and WISSOTA STAMP, 19#, PAINTED BLACK - GOOD CONDITION WITH A MINOR REPAIRED CREASE AROUND THE LIP - $25 (QTY of 2)

• 15"x8" WIDE 5 RIMS
• BASSETT STEEL W5 RACING RIM - 15x8, 3" BACK SPACING, WEIGHS 15.5#, OLDER SILVER POWDER COAT - GOOD CONDITION WITH NO CREASES OR SCUFFS - $25
• BASSETT STEEL W5 RACING RIM - 15x8, 3" BACK SPACING, WEIGHS 15.5#, OLDER SILVER POWDER COAT - GOOD CONDITION WITH ONLY (1) MINOR CREASE ON THE FACE - $20-SOLD
• BART STEEL W5 RACING RIM - 15x8, 3" BACK SPACING, WEIGHS 21.5#, STANDARD STYLE, BLACK POWDER COAT - GOOD CONDITION WITH NO CREASE OR SCUFFS, ONLY A DRILLED BLEEDER HOLE - $30 (QTY of 2)
• BART STEEL W5 RACING RIM - 15x8, 3" BACK SPACING, WEIGHS 17.5#, STANDARD STYLE, BLACK POWDER COAT - GOOD CONDITION WITH NO CREASES OR SCUFFS, ONLY A DRILLED BLEEDER HOLE - $30
• BASSETT STEEL W5 RACING RIM - 15x8, 3" BACK SPACING, WEIGHS 16.2#, STANDARD STYLE, BLACK POWDER COAT - VERY GOOD CONDITION WITH NO CREASES or SCUFFS - $40 (QTY of 2)-SOLD (1), (1) LEFT
• DIAMOND STEEL W5 RACING RIM - 15x8, 2" BACK SPACING, WEIGHS 22.5#, STANDARD STYLE, GLOSS BLACK PAINT OVER OLD CHROME - GOOD CONDITION WITH ONLY ONE SMALL CREASE ACROSS THE FACE AND A DRILLED BLEEDER HOLE - $20-SOLD
• DIAMOND STEEL W5 RACING RIM - 15x8, 4" BACK SPACING, STANDARD STYLE, WEIGHS 17.5#, BLACK PAINTED - VERY GOOD CONDITION WITH A BLEEDER INSTALLED - $35

• 15"x10" RIMS
• DIAMOND STEEL W5 RACING RIM - 15x10, 6 1/2" BACK SPACING, W5 BOLT PATTERN, STANDARD STYLE, BLACK, WEIGHS 17.5#, VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $30 (QTY of 2)
• BASSETT STEEL W5 RACING RIM - 15x10, 4 1/2" BACK SPACING, W5 BOLT PATTERN, STANDARD STYLE, BLACK, WEIGHS 16.5#, WITH BLEEDER PROVISION - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $30-SOLD
• AERO CHROME 5x5 RACING RIM - 15x10, 5 1/2" BACK SPACING, 5x5 BOLT PATTERN, STANDARD STYLE, WEIGHS 21.5#, VERY GOOD CONDITION, MINOR SCUFFS AROUND THE CENTER OUTER LIP IS UNTOUCHED AND NICE - $60 (QTY of 4)-SOLD ALL (4)
• DIAMOND STEEL W5 RACING RIM - 15x10, 4" BACK SPACING, W5 BOLT PATTERN, STANDARD STYLE, BLACK POWDER COAT, WEIGHS 18.5#, WITH SCREW IN BLEEDERS, VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $30 (QTY of 4)-SOLD (3), (1) LEFT
• BASSETT STEEL W5 RACING RIM - 15x10, 4 1/2" BACK SPACING, W5 BOLT PATTERN, STANDARD STYLE, PAINTED BLACK, WEIGHS 16.5# - GOOD CONDITION WITH ONLY ONE SMALL CREASE ACROSS THE FACE AND A DRILLED BLEEDER HOLE - $20-SOLD
• BASSETT STEEL W5 RACING RIM - 15x10, 6 1/2" BACK SPACING, W5 BOLT PATTERN, STANDARD STYLE, OLDER SILVER POWDER COAT, WEIGHS 16.5# - GOOD CONDITION WITH ONLY ONE SMALL CREASE ACROSS THE FACE AND A DRILLED BLEEDER HOLE - $20-SOLD
• DIAMOND CHROME W5 RACING RIM - 15x10, 5 1/2" BACK SPACING, W5 BOLT PATTERN, OLDER STANDARD STYLE, OLDER CHROME, WEIGHS 21.5# - GOOD CONDITION WITH NO CREASES OR SCUFFS - $30 (QTY of 2)-SOLD (1), (1) LEFT
• DIAMOND CHROME W5 RACING RIM - 15x10, 5 1/2" BACK SPACING, W5 BOLT PATTERN, OLDER STANDARD STYLE, OLDER CHROME, WEIGHS 21.5# - GOOD CONDITION WITH NO CREASES OR SCUFFS, ONLY A DRILLED BLEEDER HOLE - $25
• DIAMOND STEEL 5x5 RACING RIM - 15x10, 5" BACK SPACING, NICE SILVER POWDER COAT, DIAMOND D PATTERN, 23#, "LIKE NEW" CONDITION WITH NO CREASES OR SCUFFS - $45
• DIAMOND CHROME W5 RACING RIM - 15x10, 6 1/2" BACK SPACING, NICE CHROME, STANDARD STYLE, 17.2#, WITH BLEEDER - VERY GOOD CONDITION WITH NO CREASES OR SCUFFS - $45-SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x10, 5" BACK SPACING, STANDARD D-HOLE PATTERN, WEIGHS 21.5#, ASPHALT DESIGN, BLACK POWDER COATED - VERY GOOD CONDITION WITH NO CREASES or SCUFFS - $30 (QTY of 2)-BOTH SOLD
• BASSETT STEEL 5x5 RACING RIM - 15x10, 5" BACK SPACING, STANDARD D-HOLE PATTERN, WEIGHS 22#, BLACK POWDER COATED - VERY GOOD CONDITION WITH NO CREASES or SCUFFS - $30 (QTY of 3)-SOLD ALL (3)
• AERO STEEL 5x5 RACING RIM - 15x10, 5" BACK SPACING, STANDARD D-HOLE PATTERN - WEIGHS 20.5#, BLACK POWDER COATED - EXCELLENT CONDITION WITH NO CREASES or SCUFFS - $35-SOLD
• DIAMOND STEEL WIDE 5 RACING RIM - 15x10, 5 1/2" BACK SPACING, LIGHT WEIGHT - WEIGHS 15#, BLACK POWDER COATED, W/BLEEDER HOLE - EXCELLENT CONDITION WITH NO CREASES or SCUFFS - $35
• DIAMOND CHROME WIDE 5 RACING RIM - 15x10, 5 1/2" BACK SPACING, WEIGHS 17.5#, CHROME FINISH - EXCELLENT CONDITION WITH NO CREASES or SCUFFS - $50 
• DIAMOND CHROME 5x5 RACING RIM - 15x10, 5" BACK SPACING, WEIGHS 21.5#, CHROME FINISH, W/BLEEDER - VERY GOOD CONDITION WITH NO CREASES or SCUFFS - $50 (QTY of 2)
• AERO CHROME 5x5 RACING RIM - 15x10, 5" BACK SPACING, WEIGHS 21.5#, CHROME FINISH - LIKE NEW CONDITION WITH NO CREASES or SCUFFS - $50
• 10" WELD 6 PIN BILLET CENTER ALUMINUM RACING RIM - SPRINT CAR - WELD 15"x10", 3" OFFSET, ALUMINUM BEADLOCK RACING RIM FOR DIRT SPRINT CAR - DECENT OLDER SHAPE, SCUFFED UP FRONT AND BACK, BUT STRAIGHT RIM - $115-SOLD
• DIAMOND STEEL W5 RACING RIM - 15x10, 5" BACK SPACING, STANDARD DIAMOND STYLE, WEIGHS 17.5#, OLDER SILVER POWDER COAT, FAIR CONDITION FORMER DIRT WHEEL WITH MINOR REPAIRED CREASE AROUND THE LIP W/2 NON-SLIP BEAD SCREWS - $10
• DIAMOND STEEL W5 RACING RIM - 15x10, 5" BACK SPACING, STANDARD DIAMOND STYLE, WEIGHS 17.5#, OLDER SILVER POWDER COAT, FAIR CONDITION FORMER DIRT WHEEL WITH MINOR REPAIRED CREASE AROUND THE LIP - $10 (QTY of 5)

• 15"x12" RIMS
• SENTER/WELD ALUMINUM RACING BEAD LOCK RIM - OLDER SENTER 15"x12 1/2", 4" OFFSET, W5 BOLT PATTERN - APPEARS TO BE AN OLDER SENTER BRAND - DECENT OLDER CONDITION WITH TYPICAL AGE NICKS AND BANGS IN FAIR SHAPE - STRAIGHT BODY RIM - $75-SOLD
• MRT/MRW WIDE 5 CARBON FIBER BEAD LOCK RIM - 15"x12", 5 1/2" OFFSET, W5 BOLT PATTERN - MARSH RACING WHEEL BRAND - DECENT CONDITION BEAD LOCK RIM WITH DECENT OUTER RING - $125-SOLD
• 12" WELD 6 PIN BILLET CENTER ALUMINUM RACING RIM - SPRINT CAR - WELD 15"x12", 3" OFFSET, ALUMINUM BEADLOCK RACING RIM FOR DIRT SPRINT CAR - DECENT OLDER SHAPE, SCUFFED UP FRONT AND BACK WITH A MINOR WELD REPAIR on the BACK SIDE, BUT STRAIGHT RIM - $115
• 12" WELD BEAD LOCK ALUMINUM RACING RIM - OLDER WELD 15"x12", 3" OFFSET, ALUMINUM RACING RIM FOR DIRT LATE MODEL, DECENT OLDER SHAPE, NO BENDS, NICE STRAIGHT RIM - MISSING OUTER RING - $75-SOLD

• 15"x14" RIMS
• 14" SENTER ENGINEERING ALUMINUM RACING RIM - OLDER SCE 15"x14", 4 1/2" OFFSET, ALUMINUM RACING RIM for DIRT LATE MODEL, DECENT OLDER SHAPE, SCUFFED UP SLIGHTLY, BUT STRAIGHT RIM - $75
• 14" WELD ALUMINUM RACING RIM - OLDER WELD 15"x14", 3" OFFSET, ALUMINUM RACING RIM for DIRT LATE MODEL, DECENT OLDER SHAPE, SCUFFED UP SLIGHTLY, BUT STRAIGHT RIM - $75
• 14" WELD STYLE BEADLOCK ALUMINUM RACING RIM - OLDER WELD STYLE 15"x14", 4.5" OFFSET, ALUMINUM BEADLOCK RACING RIM for DIRT LATE MODEL, DECENT OLDER SHAPE, SCUFFED UP SLIGHTLY BUT STRAIGHT RIM - $115-SOLD
• MRW MRT CARBON FIBER RACING RIM - MRT 15"x14", 5 1/2" OFFSET, CARBON FIBER OUTER, ALUMINUM INNER RACING RIM FOR DIRT LATE MODEL, DECENT SHAPE, NO BENDS, BEAD LOCK RIM W/OUTER RING - RING IS ORANGE IN COLOR - $145
• 13" WELD STYLE 14" ALUMINUM RACING RIM - STREAKER RACING WHEELS 15"x14" (measures 13" - trick for heavy tracks where 14" rims are used) - 3" OFFSET - ALUMINUM RACING RIM FOR DIRT LATE MODEL, EXCELLENT SHAPE, NO RIPPLES or SCUFFS, NICE STRAIGHT RIM (QTY of 2) - $75
• 14" WELD BEAD LOCK ALUMINUM RACING RIM - WELD 15"x14", 4" OFFSET - ALUMINUM RACING RIM FOR DIRT LATE MODEL, DECENT SHAPE - NO BENDS, NICE STRAIGHT RIM, MISSING OUTER RING - $95-SOLD
• 14" REAL BEAD LOCK ALUMINUM RACING RIM - WELD 15"x14", (measures 13 1/2"), 3" OFFSET - ALUMINUM RACING RIM FOR DIRT LATE MODEL, DECENT SHAPE - NO BENDS, NICE STRAIGHT RIM, MISSING OUTER RING - $95-SOLD
• 14" WELD BEAD LOCK ALUMINUM RACING RIM - OLDER WELD 15"x14", 3" OFFSET ALUMINUM RACING RIM FOR DIRT LATE MODEL, DECENT OLDER SHAPE, SCUFFED AND NICKED UP SLIGHTLY, BUT STRAIGHT RIM - $125-SOLD

• SPACERS/ADAPTERS/RINGS

• LARGE VARIETY OF USED SPACERS, CALL FOR SPECIFICS
• (3) AFCO WIDE-5 WHEEL SPACER, PART NO. AFC31000, ALMAG ALLOY, ONLY 5 LBS, 2" SPACER - $60/EA -SOLD ALL (2)
• ALUMINUM WHEEL ADAPTER - GOOD CONDITION WHEEL ADAPTER, ADAPTS FROM 4 1/2" BOLT PATTERN TO 5x5 BOLT PATTERN, 5/8" COARSE STUDS, 1" THICK SPACER, SIMILAR TO P.N. ALL44128 - $40
• BART BEAD LOCK OUTER RING - ALUMINUM, FAIR USABLE SHAPE FOR 15" WHEELS, SCUFFED AND WELL USED, BUT STRAIGHT AND CHEAP ENOUGH - $8 (QTY of 3)
• BASSETT BEAD LOCK OUTER RING - CHROME STEEL - FAIR USABLE SHAPE FOR 15" BASSETT WHEELS - $10
• BASSETT BEAD LOCK OUTER RING - ALUMINUM, FAIR USABLE SHAPE FOR 15" WHEELS, PAINTED UGLY GREEN - $8
• BASSETT BEAD LOCK OUTER RING - CHROME STEEL - GOOD USABLE SHAPE FOR 15" BASSETT WHEELS - $15 (QTY of 2)
• DIAMOND BEAD LOCK OUTER RING - POWDER COATED STEEL - GOOD USABLE SHAPE FOR 15" DIAMOND WHEELS - $15
• DIAMOND BEAD LOCK OUTER RING - POWDER COATED STEEL - WIDE RING - VERY GOOD CONDITION FOR 15" DIAMOND WHEELS - $25
• SCP 1/8" THICK 5x5 STEEL WHEEL SPACER - FITS 5x5 BOLT PATTERN - GOOD CONDITION - $5 (QTY of 5)
• SCP 1/4" THICK 5x5 STEEL WHEEL SPACER - FITS 5x5 BOLT PATTERN - GOOD CONDITION - $5 
• COLEMAN STYLE 1/4" THICK ALUMINUM WHEEL SPACER - SIMILAR TO COLEMAN P.N. 101-125, BUT 1/4" THICK - FITS 5x5" - GOOD CONDITION - $5 (QTY of 4)-SOLD (3), (1) LEFT
• COLEMAN STYLE 1/2" THICK ALUMINUM WHEEL SPACER - COLEMAN P.N. 101-050, FITS 5x5" - 5/8" STUD, 5x4 3/4" - 1/2" STUD AND 5x4 1/2" - 1/2" STUD - EXCELLENT CONDITION - $15
• BASSETT STEEL SILVER BEADLOCK OUTER RING *NEW* - 15x8, NEW RING, NEVER RACED - $20
• COLEMAN STYLE 1/4" THICK ALUMINUM WHEEL SPACER - SIMILAR TO COLEMAN P.N. 101-125, BUT 1/4" THICK - FITS 5x5" - BLACK ANODIZED - LIKE NEW CONDITION - $5 (QTY of 8)-SOLD (4), (4) LEFT
• COLEMAN STYLE .200" THICK ALUMINUM WHEEL SPACER - SIMILAR TO COLEMAN P.N. 101-125, BUT .200" THICK - FITS 5x5" - BLACK ANODIZED - LIKE NEW CONDITION - $5 (QTY of 18)-SOLD (6), (12) LEFT
• BASSETT PLASTIC MUD PLUG for BEAD LOCKS (OLD STYLE) - OLDER STYLE PLASTIC MUD PLUG WITH DZUS FASTENERS AND BOLT ON DZUS TAB MOUNTS FOR BASSETT BEAD LOCKS, PAINTED BLUE - $15
• BASSETT PLASTIC MUD PLUG for BEAD LOCKS (OLD STYLE) - OLDER STYLE PLASTIC MUD PLUG WITH DZUS FASTENERS AND BOLT ON DZUS TAB MOUNTS FOR BASSETT BEAD LOCKS, PAINTED RED - $15
• 5x5 STEEL WHEEL SPACERS - PACK of (4) 1/16" THICK - FITS 5x5" BOLT PATTERN - GOOD CONDITION - 1/16" THICK STEEL - $5
• 5x5 STEEL WHEEL SPACERS - PACK of (2) - FITS 5x5" BOLT PATTERN - GOOD CONDITION - 1/8" AND 1/4" THICK STEEL - $5
• 5x5 STEEL WHEEL SPACERS - PACK of (2) 1/4" THICK - FITS 5x5" BOLT PATTERN - GOOD CONDITION - 1/4" THICK STEEL - $5-SOLD
• 5x5 ALUMINUM WHEEL SPACERS - PACK of (2) 1/4" THICK - FITS 5x5" BOLT PATTERN - VERY GOOD CONDITION - 1/4" ALUMINUM STEEL - $5 
• 5x5 STEEL WHEEL SPACERS - PACK of (2) 1/4" THICK - FITS 5x5" BOLT PATTERN - VERY GOOD CONDITION - 1/4" THICK STEEL - $5 (QTY of 5)-SOLD (1PK), (4) LEFT
• SCP 3/8" THICK 5x5 STEEL WHEEL SPACER - FITS 5x5" BOLT PATTERN - VERY GOOD CONDITION - $5
• 5x5 STEEL WHEEL SPACERS - PACK of (2) 1/8" THICK - FITS 5x5" BOLT PATTERN - GOOD CONDITION - 1/8" THICK STEEL - $5 (QTY of 3)
• 5x5 STEEL WHEEL SPACERS - PACK of (2) 3/16" THICK - FITS 5x5" BOLT PATTERN - GOOD CONDITION - BEVELED 3/16" THICK STEEL - $5
• COLEMAN STYLE 5/8" THICK ALUMINUM WHEEL SPACER - COLEMAN P.N. 101-050, FITS 5x5" - 5/8" STUD, 5x4 3/4" - 1/2" STUD - EXCELLENT CONDITION - 5/8" THICK - $15-SOLD
• 5x5 WHEEL SPACER - 1/16" THICK - FITS 5x5 BOLT PATTERN - GOOD CONDITION - 1/16" THICK STEEL - $2.50
• ALLSTAR STYLE 1/2" THICK ALUMINUM WHEEL SPACER - ALLSTAR P.N. ALL44121, fits 5x5", 5x4 3/4" and 5x4 1/2" - 5/8" STUD - EXCELLENT CONDITION - $12 (QTY of 3)-SOLD (ALL 3)
• ALLSTAR STYLE 1/2" THICK ALUMINUM WHEEL SPACER - ALLSTAR P.N. ALL44121, fits 5x5" and 5x4 3/4" - 5/8" STUD - EXCELLENT CONDITION - $12 (QTY of 2)-SOLD (1), (1) LEFT
• ALLSTAR STYLE 1/2" THICK ALUMINUM WHEEL SPACER - ALLSTAR P.N. ALL44121, fits 5x5" - 5/8" STUD - EXCELLENT CONDITION - $12

• TIRES
• USED RC4 TIRES - GOOD USED RC4 TIRES - LOCAL GRAND NATIONAL SPORTSMAN LEGAL - DECENT THREAD LEFT, PRICE REFLECTS USABILITY - SEE 15"x8" 5x4 3/4" RIM SECTION FOR DETAILS or CALL - ONLY AROUND (4) WHEEL/TIRE COMBOS LEFT
• DIAMOND CHROME 5x4 3/4" RACING RIM & MOUNTED RC4 TIRE - 15x8, 5" BACK SPACING, 5x4 3/4" BOLT PATTERN, STANDARD STYLE, DECENT CHROME, no IMCA STICKER - DECENT CONDITION WITH NO MAJOR CREASES or SCUFFS - FAIR to DECENT USED 26.5" RC4 TIRE MOUNTED (LOCAL GRAND NATIONAL SPORTSMAN LEGAL) - ENTRY LEVEL ITEM or CHEAP SPARE - PRICE REFLECTS USABILITY - $35
• AERO STEEL 5x4 3/4" BEADLOCK RACING RIM & MOUNTED RC4 TIRE - 15x8, 2" BACK SPACING, 5x4 3/4" BOLT PATTERN, STANDARD STYLE, PAINTED BLACK, no IMCA STICKER - FAIR CONDITION WITH MINOR CREASES and SCUFFS - FAIR CONDITION USED 27.5" RC4 TIRE MOUNTED (LOCAL GRAND NATIONAL SPORTSMAN LEGAL) - ENTRY LEVEL ITEM or CHEAP SPARE - PRICE REFLECTS USABILITY - $45-SOLD
• AERO STEEL 5x4 3/4" RACING RIM & MOUNTED RC4 TIRE - 15x8, 2" BACK SPACING, 5x4 3/4" BOLT PATTERN, STANDARD STYLE, SILVER POWDER COATED, no IMCA STICKER - DECENT CONDITION WITH RIPPLED OUTER LIP - FAIR CONDITION USED 26.5" RC4 TIRE MOUNTED (LOCAL GRAND NATIONAL SPORTSMAN LEGAL) - ENTRY LEVEL ITEM or CHEAP SPARE - PRICE REFLECTS USABILITY - $30-SOLD
• AERO STEEL 5x4 3/4" RACING RIM & MOUNTED RC4 TIRE - 15x8, 2" BACK SPACING, 5x4 3/4" BOLT PATTERN, STANDARD STYLE, SILVER POWDER COATED, IMCA STICKER - DECENT CONDITION WITH A RIPPLED "SLAMMER" RING INSTALLED - FAIR CONDITION USED 27.5" RC4 TIRE MOUNTED (LOCAL GRAND NATIONAL SPORTSMAN LEGAL) - ENTRY LEVEL ITEM or CHEAP SPARE - PRICE REFLECTS USABILITY - $30-SOLD
• AERO STEEL 5x4 3/4" RACING RIM & MOUNTED RC4 TIRE - 15x8, 2" BACK SPACING, 5x4 3/4" BOLT PATTERN, STANDARD STYLE, SILVER POWDER COATED, no IMCA STICKER - DECENT CONDITION WITH A RIPPLED OUTER LIP - FAIR CONDITION USED 27.5" RC4 TIRE MOUNTED (LOCAL GRAND NATIONAL SPORTSMAN LEGAL) - ENTRY LEVEL ITEM or CHEAP SPARE - PRICE REFLECTS USABILITY - $30-SOLD

COOLING & ACCESSORIES

• (4) ALUMINUM FAN SPACER (1-1", 4-1 1/2", 1-2") - $5EA
• WATER NECKS (MANY TO CHOOSE FROM)- $5EA
• 90 DEGREE ALUMINUM RADIATOR HOSE BEND W/-8AN MALE BUNG WELDED IN - $15
• PRESSURIZED EXPANSION FILL TANK, GOOD CONDITION ALUMINUM TANK WITH FITTINGS - $50-REDUCED to $25-SOLD
• FLEX-A-LITE MOLDED NYLON FAN, PART NO. 417-1, 17" - $15
• MOROSO WATER NECK FILLER EXTENSION HOUSING, P.N. 63423 IN GOOD SHAPE - $20
• TITAN 12" ELECTRIC FAN, STANDARD 12" ELECTRIC FAN IN GOOD CONDITION - $35
• 15" STEEL FAN - $15
• MOROSO FILLER NECK KIT, GOOD CONDITION, PART NO. MOR63420, GOOD FOR FILLING ENGINE, WHEN THE RADIATOR IS LOWER THEN THE WATER NECK - $45
• JAZ PRODUCTS OVERFLOW TANK, GOOD CONDITION, 1QT POLY TANK - $15
• CUSTOM ALUMINUM OVERFLOW TANK, UNIQUE FLOW INLETS AND OUTLETS - $10
• (1) 17" FLEX FAN - $10
• WEHRS MACHINE INTAKE DIVIDER and RADIATOR RESTRICTOR - COMBO PACK, WEHRS P.N. WM749, LIKE NEW - $20-SOLD
• ALUMINUM WATER PUMP - SBC ALUMINUM WATER PUMP, VERY LITTLE RUN TIME, LOOKS LIKE NEW, 5/8" SHAFT, UNIVERSAL FAN MOUNTING, REMOVED FROM A WORKING CAR - $45
• BILLET ALUMINUM CRANK SHAFT PULLEY - MEASURES 5 1/2" O.D., DUAL GROOVE, ONLY 1 SEASON OLD, DECENT SHAPE, FITS LONG WATER PUMP APPLICATIONS for SBC - $40
• STEWART COMPONENTS STAGE 2 WATER PUMP - STAGE 2 WATER PUMP FOR SBC - REMOVED FROM A TOP RUNNING GRAND NATIONAL, 5/8" SHAFT, SHORT STYLE PUMP, PREMIUM GRADE PUMP - $95 (QTY of 2)
• WEIAND TEAM G STAGE 2 WATER PUMP - STAGE 2 WATER PUMP for SBC, REMOVED FROM A TOP RUNNING GRAND NATIONAL, 5/8" SHAFT, SHORT STYLE PUMP - UNIVERSAL FAN MOUNTING, PREMIUM GRADE PUMP, NON TWIST CAST VERSION OF P.N. WEI9222 - $85
• WEIAND TEAM G STAGE 2 WATER PUMP - ADJUSTABLE MOUNTING WITH SLOTTED HOLES - STAGE 2 WATER PUMP for SBC - REMOVED FROM A TOP RUNNING GRAND NATIONAL, 5/8" SHAFT, SHORT STYLE PUMP - UNIVERSAL FAN MOUNTING, PREMIUM GRADE PUMP, NON TWIST CAST VERSION of P.N. WEI9223 - $95
• ALLSTAR SBC ALUMINUM WATER PUMP - *NEW* ALLSTAR PERFORMANCE SMALL BLOCK CHEVY PUMP - ALLSTAR P.N. ALL3110 - COMES WITH 5/8" SHAFT DIAMETER - SHORT NECK AND ALUMINUM DESIGN - ALLSTAR PUMPS DISSIPATE HEAT MORE RAPIDLY AND EQUALIZE WATER FLOW TO BOTH SIDES OF THE ENGINE - $65
• MOROSO MANIFOLD FILLER NECK - MOROSO P.N. 63420, MISSING TOP FILLER PLATE - MOUNTS ON INTAKE TO ADD A RADIATOR CAP TO PURGE ALL AIR OUT OF THE SYSTEM - GOOD CONDITION BLASTED NECK - $35
• 19" - 4 BLADE STEEL FAN - USED 1 NIGHT, LIKE NEW - STEEL BODY/STEEL FINS - 4 BLADE - ALLSTAR P.N. 30101 - $20 (QTY of 2)-SOLD (1), (1) LEFT
• AEROQUIP -20AN 90 DEG and STR LOWER RADIATOR LINE - AEROQUIP -20AN STRAIGHT AND 90 DEG ENDS - 24" LONG, STAINLESS BRAIDED LINE - EXCELLENT SHAPE, LISTED AT LESS THAN HALF OF NEW - $85
• XRP -20AN 90 DEG FITTING - AEROQUIP STYLE, XRP 90 DEG END for BRAIDED STYLE LINE - EXCELLENT SHAPE, LISTED AT LESS THAN HALF OF NEW - $50-SOLD
• EARL'S -20AN 90 DEG FITTING - AEROQUIP STYLE EARL'S 90 DEG END FOR BRAIDED STYLE LINE - EXCELLENT SHAPE, LISTED AT LESS THAN HALF OF NEW - $50
• FACTORY FAN SPACER - GOOD CONDITION, 1" THICK, 5/8" SHAFT - $5
• AEROQUIP -20AN 90 DEG and STR LOWER RADIATOR LINE - AEROQUIP -20AN STRAIGHT AND 90 DEG ENDS 23" LONG STAINLESS BRAIDED LINE - EXCELLENT SHAPE, LISTED AT LESS THAN HALF OF NEW - $85
• AEROQUIP STYLE EARL'S -20AN (2) 45 DEG UPPER RADIATOR LINE - EARL'S -20AN 45 DEG BOTH ENDS, 10" LONG STAINLESS BRAIDED LINE - EXCELLENT SHAPE, LISTED AT LESS THAN HALF OF NEW - $65
• 19" - 4 BLADE STEEL FAN - GOOD USED CONDITION - STEEL BODY/STEEL FINS - 4 BLADE - $15
• WEIAND ALUMINUM WATER PUMP, WEIAND SBC ALUMINUM LONG STYLE WATER PUMP, SEVERAL SEASONS OF RUN TIME, 5/8" SHAFT, UNIVERSAL FAN MOUNTING, INLET HAS BEEN MODIFIED TO -20AN, P.N. WEI8240, REMOVED FROM A WORKING CAR, DECENT CONDITION - $30
• STEWARD WARNER WATER TEMPERATURE GAUGE, PART NO. STE114274, 2 1/16" FACE, 100 DEG. - 260 DEG., *NEW* IN BOX, RETAILS FOR $50.99, NOW ONLY $34
• UNIVERSAL FAN SPACER - VERY GOOD CONDITION - 2 1/4" SPACING, UNIVERSAL FAN BOLT PATTERN - 5/8" INSIDE BORE, 5/8" FAN ARBOR, BLUE ANODIZED ALUMINUM - $10
• ALUMINUM WATER PUMP - SBC ALUMINUM SHORT STYLE WATER PUMP - CAST WP350CT - ALSO HAS (2) 1/2"P AUX OUTLETS - AROUND 2 SEASONS of RUN TIME, HD 3/4" SHAFT - STD DUAL PATTERN FAN MOUNTING - 1 7/8" OUTLET - REMOVED FROM A WORKING CAR IN GOOD CONDITION - $35
• MOROSO ALUMINUM WATER PUMP - MOROSO SBC ALUMINUM SHORT STYLE PUMP - CAST 63xxx (63500) - AROUND 2 SEASONS of RUN TIME, 5/8" SHAFT - STD DUAL PATTERN FAN MOUNTING - 1 7/8" OUTLET - REMOVED FROM A WORKING CAR IN GOOD CONDITION - $85
• SBC STEEL WATER NECK - USED STANDARD WATER NECK FOR SBC IN GOOD PHYSICAL CONDITION - O-RING STYLE OR STD GASKET - $5
• CUSTOM ALUMINUM OVERFLOW TANK - TRIANGULAR IN SHAPE - 10" TALL, 1/2" WIDE ON THE BOTTOM, 4 1/2" WIDE ON THE TOP, 1 3/4" DEEP, (2) 4 1/4"x 2" FLATS WELDED ACROSS THE BACK FOR MOUNTING - 1/4"P BUNG WELDED ON THE TOP, 1/4"P BUNG WELDED IN THE BACK, 1/2" FROM THE TOP - $20
• CUSTOM AEROQUIP HIGH PRESSURE MALE ALUMINUM COUPLER - HIGH PRESSURE COUPLER REMOVED FROM AN ARCA CAR COOLING SYSTEM - CUSTOM ALUMINUM FABRICATED TO A 2 1/2" BODY AND A -8AN male END WITH A 1 3/4" MOUNTING CLAMP - $10
• ALLSTAR FAN SHROUD for 28" HOWE RADIATOR - P.N. ALL 30116, FITS 28" HOWE RADIATOR *NEW* NEVER INSTALLED, BUT FAN CONE HAS BEEN TRIMMED BACK 4" - $45
• 14 1/2" - 4 BLADE STEEL FAN - EXCELLENT USED CONDITION - CUSTOM BUILT for a QUALIFYING CUP CAR - STEEL BODY/STEEL FINS - 4 BLADE - $15
• 16" - 4 BLADE STEEL FAN - EXCELLENT USED CONDITION - STEEL BODY/STEEL FINS - 4 BLADE - $15 (QTY of 2)-SOLD (1), (1) LEFT
• 18" - 4 BLADE STEEL FAN - GOOD USED CONDITION - STEEL BODY/STEEL FINS - 4 BLADE - $15
• SPAL 16" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS - READY TO BOLT ON - HD RACE VERSION appx 2500cfm - MOUNTS EASILY WITH ZIP STRIPS - $75 (QTY of 4)-SOLD (3), (1) LEFT
• SPAL 16" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS - READY TO BOLT ON - LOW PROFILE VERSION appx 1600cfm - MOUNTS EASILY WITH ZIP STRIPS - $75 (QTY of 2)
• SPAL 12" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, MINOR CRASH DAMAGE, 2 BLADES ON EACH SIDE ARE REMOVED, 3 ON EACH SIDE LEFT, STILL MOVES AIR NICE - READY TO STRAP ON - HD RACE VERSION, appx 1500cfm W/DAMAGE - MOUNTS EASILY WITH ZIP STRIPS - $35
• PERMA COOL 16" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, ONLY ONE MINOR CRACK - READY TO STRAP ON - HD RACE VERSION appx 2500cfm - MOUNTS EASILY WITH ZIP STRIPS - $60
• 1 3/4" O.D. x 9 " LONG ALUMINUM RADIATOR HARD LINE - FITS IN LINE WITH LOWER RADIATOR HOSE WITH A 30deg ELBOW W/6" BLUE HOSE CONNECTORS ON EACH END WITH CLAMPS - $5
• 2" O.D. x 11" LONG ALUMINUM RADIATOR HARD LINE - FITS IN LINE - STRAIGHT WITH AEROQUIP PRESSURE COUPLER (P.N. FBM1153) - $5
• 15" - 6 BLADE STEEL FAN - DECENT USED CONDITION - STEEL BODY/STEEL FINS - 6 BLADE - $15-SOLD
• SBC ALUMINUM WATER NECK - USED STANDARD NECK FOR SBC IN GOOD PHYSICAL CONDITION - STD LEFT ANGLE, NO PLUG INLETS - FACTORY STD GASKET STYLE - $4 (QTY of 2)-SOLD (1), (1) LEFT
• SBC ALUMINUM WATER NECK - USED STANDARD NECK FOR SBC IN GOOD PHYSICAL CONDITION - STD LEFT ANGLE, (1) PLUG INLET - FACTORY STD GASKET STYLE - $4 (QTY of 4)-SOLD (1), (3) LEFT
• SBC ALUMINUM WATER NECK - USED STANDARD NECK FOR SBC IN GOOD PHYSICAL CONDITION - STD LEFT ANGLE, (2) PLUG INLETS - FACTORY STD GASKET STYLE - $4 (QTY of 3)
• UNIVERSAL FAN SPACER - GOOD CONDITION, 1" SPACING - WIDE FAN BOLT PATTERN - 5/8" INSIDE BORE, 5/8" FAN ARBOR - ALUMINUM - $4
• UNIVERSAL FAN SPACER - GOOD CONDITION, 1" SPACING - NARROW FAN BOLT PATTERN - 5/8" INSIDE BORE, 5/8" FAN ARBOR - ALUMINUM - $4
• NASCAR COOL DOWN FLUSH FILL QUICK DISCONNECT - RICHARDSON RACE PRODUCTS COOL DOWN QUICK DISCONNECT UNIT - -20AN M ONE END/ -20AN F OTHER END - (1) MALE, (1) FEMALE QUICK DISCONNECT FITTINGS CENTER WITH INTERNAL CHECK VALVE IN BETWEEN - USED IN-LINE A RADIATOR LINE FROM A CUP CAR - $65 (QTY of 2)
• NASCAR COOL DOWN FLUSH FILL QUICK DISCONNECT - (1) RICHARDSON RACE PRODUCTS COOL DOWN QUICK DISCONNECT UNIT (2) -12AN FEMALE FITTINGS IN/ (2) -12AN MALE FITTINGS OUT - (2) 1/2" PIPE NIPPLES FOR QUICK DISCONNECT FITTINGS CENTER WITH INTERNAL CHECK VALVE IN BETWEEN W/1 FEMALE DISCONNECT - USED IN-LINE A COOLING LINE FROM A CUP CAR - $45 (QTY of 2)
• NASCAR COOL DOWN FLUSH FILL QUICK DISCONNECT - RICHARDSON RACE PRODUCTS COOL DOWN QUICK DISCONNECT UNIT - -20AN M ONE END/ -20AN F OTHER END - (3) 1/2" MALE PIPE NIPPLES FOR QUICK DISCONNECT FITTINGS CENTER WITH INTERNAL CHECK VALVE IN BETWEEN - USED IN-LINE A RADIATOR LINE FROM A CUP CAR - $45
• SBC CAST IRON WATER PUMP - RAN ON A HOBBY STOCK - SHORT STYLE - BOTH FAN BOLT PATTERNS - $10
• UNIVERSAL ALUMINUM FAN SPACER - GOOD CONDITION, 3" SPACING - WIDE FAN BOLT PATTERN - 3/4" INSIDE BORE, 5/8" FAN ARBOR - INCLUDES BOLTS TO THE PUMP - $10-SOLD
• SPAL 12" "PULLER" ELECTRIC FAN - *NEW* NEVER INSTALLED - CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS - READY TO BOLT ON - HD RACE VERSION appx 1500cfm - INCLUDES MOUNTING KIT - $75-SOLD
• SPAL 15" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS - READY TO BOLT ON - HD RACE VERSION appx 2500cfm - MOUNTS EASILY WITH ZIP STRIPS - $75-SOLD
• MOROSO BOLT ON WATER NECK - -16AN M WATER NECK IN VERY GOOD CONDITION - MOROSO P.N. 63460 - $20
• SPAL 15" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS - READY TO BOLT ON - HD RACE VERSION - appx 2500cfm - MOUNTS EASILY WITH ZIP STRIPS - $60 (QTY of 3)
• SPAL 15" "PULLER" ELECTRIC FAN - TOP CUP TEAM TAKE-OFF WITH ONLY 3 or 4 RACES, CHECKED, SPINS GREAT, NO CRACKS or PROBLEMS EXCEPT ONE SMALL 1/4" CHIP IN THE HOUSING - READY TO BOLT ON - HD RACE VERSION - appx 2500cfm - MOUNTS EASILY WITH ZIP STRIPS - $60

• PULLEYS

• STOCK GM PULLEYS, MANY TO CHOOSE FROM - $5 EA
• WATER PUMP PULLEY. COLEMAN (DS-362) 5/8" BORE - $40
• ALUMINUM LOWER PULLEY (SIMILAR TO MOROSO GM LOWER PULLEY MOR64060, EXCEPT 5" IN DIAMETER) - $25
• ALUMINUM MOROSO GM LOWER PULLEY, LONG PUMP (MOR64110) 50% REDUCTION - $25
• ALUMINUM FAN SPACERS WITH 3/4" HOLE FOR WATER PUMP AND 1 3/4" FAN BOLT SPACING. 1 1/2", 2", AND 2 1/2" - $10EA
• COLEMAN 345-4-3 4" FAN SPACER WITH BOLTS - $30
• COLEMAN ALUMINUM UPPER PULLEY, 30% REDUCTION, PART NO. DS-362 - $35
• COLEMAN MANDREL DRIVE, INCLUDES 3 1/2" STEEL ARBOR, END CAP, 17-TOOTH COG AND ASST. ALUMINUM SPACERS - $45
• COLEMAN LOWER PULLEY, PART NO. DS363 - $25
• COLEMAN UPPER PULLEY, PART NO. DS362 - $35
• BILLET ALUMINUM UPPER PULLEY, CV PRODUCTS, DOUBLE GROOVE, 6 15/16" DIA, GOOD USED CONDITION - $25
• ALLSTAR ALUMINUM UPPER AND LOWER STEEL PULLEY SET, FOR SBC SHORT PUMP SET-UP, ALUMINUM PULLEYS, CRANK PART NO. 31030 (4.75"), WATER PUMP PART NO. 31040 (6.625"), VERY GOOD CONDITION, NO CRACKS OR BENDS - $65/SET
• 17" 6-BLADE STEEL FAN, NEW - $20
• MATCHED PAIR OF COLEMAN ALUMINUM RACING PULLEYS, UPPER AND LOWER PULLEY, VERY GOOD CONDITION, PART NO. DS364 2L AND PART NO. DS365, RETAILS NEW FOR $158/PR-NOW ONLY $95PR
• 4" FAN SPACER - $15
• 2" FAN SPACER - $12 (MANY OTHER STYLES AND SIZES TO CHOOSE FROM $4-$20)
• 4" ALUMINUM COLEMAN FAN SPACER, GOOD CONDITION, PART NO. COLC345-4
• BILLET ALUMINUM WATER PUMP PULLEY - MEASURES 5 7/8" O.D., DUAL GROOVE, ONLY 1 SEASON OLD, BLACK ANODIZED - NICE SHAPE - $35
• UNIVERSAL FAN SPACER - VERY GOOD CONDITION, 3.0" SPACING, UNIVERSAL FAN BOLT PATTERN, 3/4" INSIDE BORE, 5/8" FAN ARBOR - $10
• COLEMAN ALUMINUM WATER PUMP PULLEY - DECENT USED SHAPE, SHOWING MINOR WEAR - COLEMAN P.N. DS 380 - $25
• CRANK DRIVE ARBOR END CAP - STEEL END CAP FOR CRANK DRIVE ARBOR ASSEMBLIES, 2 1/2" DIA., EXCELLENT CONDITION - $5
• BILLET ALUMINUM WATER PUMP PULLEY - MEASURES 7" O.D., DUAL GROOVE, ONLY 1/2 SEASON OLD, 3/4" SHAFT SIZE, NICE SHAPE, P.N. PRB15453 - $40
• BILLET ALUMINUM WATER PUMP PULLEY - MEASURES 7" O.D., DUAL GROOVE, ONLY 1/2 SEASON OLD, 5/8" SHAFT SIZE, NICE SHAPE, P.N. PRB15453, showing some belt grooves and nicks - $30
• MOROSO DUAL GROOVE ALUMINUM LOWER PULLEY - FITS SHORT STYLE WATER PUMP MOUNTING - 5.4" O.D., MOROSO P.N. 64060 - OLDER SHAPE, FAIR CONDITION, SHOWING SOME LIGHT BELT GROOVES - $20 (QTY of 2)-SOLD (1), (1) LEFT
• MACHINED ALUMINUM DUAL GROOVE WATER PUMP PULLEY - FITS SHORT STYLE WATER PUMP MOUNTING, 3/4" SHAFT - 6 5/8" O.D., similar to P.N. 15453 - OLDER SHAPE, FAIR CONDITION, SHOWING SOME LIGHT BELT GROOVES - $20
• BILLET ALUMINUM WATER PUMP PULLEY - MEASURES 5 7/8" O.D., DUAL GROOVE, P.N. 6006, AVERAGE USE, 2 SEASONS OLD, 3/4" SHAFT, DECENT SHAPE - $35
• COLEMAN ALUMINUM WATER PUMP PULLEY - DECENT USED SHAPE, SHOWING MINOR BELT WEAR GROOVES - COLEMAN P.N. DS-380-3, 3/4" SHAFT, 5 7/8" O.D. - $20
• CANTON 2 GROOVE LOWER CRANK PULLEY - MEASURES 5.5" O.D., DUAL GROOVE, fits SBC LONG PUMP APPLICATIONS - ABOUT 2 SEASONS OLD - DECENT SHAPE, P.N. CAN74-170 - $60
• CANTON 2 GROOVE LOWER CRANK PULLEY, MEASURES 5.5" O.D., DUAL GROOVE, FITS SBC LONG PUMP APPLICATIONS, ABOUT 2 SEASONS OLD, NEEDS (2) NICKS TO BE SANDED DOWN, VERY EASY FIX, DECENT SHAPE, PART NO. CAN74-160 - $30
• FACTORY STAMPED STEEL DEEP GROOVE WATER PUMP PULLEY, MEASURES 7" O.D. DUAL GROOVE, NEW. INSTALLED, NEVER RAN, STAMPED GM 377024500, FITS SHORT WATER PUMP APPLICATIONS, SMALL BOLTING PATTERN FOR SBC. - $45
• STOCK STEEL WATER PUMP PULLEY - FITS SHORT and LONG STYLE WATER PUMP MOUNTING - 7 7/8" O.D., 3/4" ARBOR W/BOTH WP BOLT PATTERNS - VERY GOOD CONDITION - NO CRACKS or BENDS - $15
• ALUMINUM CRANK PULLEY, UNKNOWN BRAND IN DECENT SHAPE, FOR LONG WP. UNIQUE MOUNTING WITH ALLEN SCREWS ON THE BALANCER AND (1) MAIN BOLT - $20
• ALLSTAR STYLE ALUMINUM CRANK SHAFT PULLEY - NICE USED SHAPE, SHOWING NO WEAR - 2 GROOVE - 5.0" O.D. - similar to ALLSTAR P.N. ALL31030 - $20-SOLD
• FACTORY STAMPED STEEL DEEP GROOVE WATER PUMP PULLEY - MEASURES 7" O.D., DUAL GROOVE, OLDER, STAMPED GM 3770245CC, FITS SHORT WATER PUMP APPLICATIONS, DRILLED for BOTH BOLTING PATTERNS and 3/4" ARBOR for SBC - $25
• ALUMINUM UPPER WATER PUMP PULLEY - MEASURES 6 3/4" O.D., DUAL GROOVE, fits SBC, 5/8" SHAFT - ABOUT 2 SEASONS OLD - NICE SHAPE, similar to P.N. PRB15453 - $25
• BILLET ALUMINUM LOWER PULLEY - DOUBLE GROOVE, 5 1/2" DIA for LONG STYLE WATER PUMP - GOOD USED CONDITION - $20
• MINI COG PULLEY - 16 TOOTH COG PULLEY - .500" INSIDE BORE - PULLEY IS IN EXCELLENT CONDITION - $15
• COLEMAN ALUMINUM CRANK SHAFT PULLEY for SBC - CRANK PULLEY for SHORT PUMP - PULLEY MEASURES 5 9/16" O.D. DUAL GROOVE fits SBC, P.N. DS-363-XL - GROOVES IN VERY GOOD CONDITION - $35
• COLEMAN ALUMINUM CRANK SHAFT PULLEY for SBC - CRANK PULLEY for SHORT PUMP - PULLEY MEASURES 5 9/16" O.D., DUAL GROOVE - fits SBC, P.N. DS-363-XL - GROOVES IN VERY GOOD CONDITION - $35
• BILLET ALUMINUM SBC WATER PUMP PULLEY COMBO - 25% REDUCTION - WP and CRANK SHAFT PULLEYS for SHORT PUMP - WP MEASURES 6 7/8" O.D. DUAL GROOVE - fits SBC, 3/4" SHAFT SMALL PATTERN - CRANK MEASURES 5 3/8" O.D. DUAL GROOVE - ONLY 2 SEASONS OLD, GROOVES IN DECENT SHAPE - $55/set
• ALLSTAR STYLE ALUMINUM CRANKSHAFT PULLEY - NICE USED SHAPE, SHOWING NO WEAR - 2 GROOVE, 5.4" O.D. - similar to ALLSTAR P.N. ALL31030 - $20-SOLD
• STEWART COMPONENTS WATER PUMP PULLEY - 3/4" SHAFT - BOTH FAN BOLT PATTERNS - BILLET SPUN ALUMINUM 7 3/4" O.D. PULLEY - $35-SOLD

  PEDALS, BRAKES & ACCESSORIES

• BRAKE ACCESSORIES  - DUCTS, GAUGES, CYLINDERS -
• NEW, BUT SITTING AROUND, UNIVERSAL BRAKE DUCT. (2) FIVE STAR PART NO. 002-412D - $14
• (2) 20" SECTIONS OF BRAKE HOSE - $5EA
• ASSORTED SINGLE AND DOUBLE WINDOW MOUNT 3" BRAKE DUCTS - $10EA
• (2) 4" BRAKE BLOWERS - $20EA
• (2) 3" BRAKE BLOWERS - $15EA
• 4" IN/3" OUT ALUMINUM HOUSED BRAKE BLOWER - $20
• MISC. BRAKE DUCTING - $5.00EA (SEE PICS BELOW), ALSO MANY MISC. PIECES OF INSULATORS.
• GOOD CONDITION USED ROTORS, UNIDIRECTIONAL WILWOOD ROTORS, PART NO. 6902 & PART NO. 6903 - $
• (4) NEW BUMPER MOUNT BRAKE DUCTS - $10EA
• BRAKE DUCTS. PLASTIC BRAKE DUCTS - $10EA, METAL BRAKE DUCTS - $5.00 EA (YOUR CHOICE) SEE PICTURES BELOW
• 3" BRAKE BLOWER SET-UPS - $15
• DUAL 3" BRAKE BLOWER SET-UPS - $30
• (2) DPI SIERRA IN LINE LOCK RESISTANT BRAKE SYSTEM, INSTALLS IN REAR BRAKE LINE TO ACT AS A SHOCK ABSORBER FOR YOUR BRAKING SYSTEM, DPI PART NO. LBS-1 - $65/EA-SOLD (1), (1) LEFT
• LONGACRE BRAKE BIAS GAUGES, PAIR OF FRONT AND REAR 2 5/8" BRAKE BIAS GAUGES, VERY GOOD CONDITION, PART NO. LON44136 - $55
• ALLSTAR SINGLE INLET BRAKE DUCT - ALL ALUMINUM SINGLE BRAKE INLET DUCT, 3" DIA. INLET, ADAPTS TO MOST SWEET MFG SPINDLES AND OTHERS, P.N. ALL42115, RH MODEL - $20 (QTY of 2)-SOLD (1), (1) LEFT
• COLEMAN BRAKE ROTORS FOR STEEL SPORTSMAN HUB, FRESHLY RESURFACED, PART NO. 140-753, LIKE NEW - $95/PR
• SCHREINER SCALLOPED LIGHT WEIGHT BRAKE ROTORS - PAIR of SCALLOPED BRAKE ROTORS for 5 BOLT MOUNTING SCHREINER HUBS - THINNER THAN LEGAL IN MOST APPLICATIONS - ROTORS ARE CURRENTLY .750" THICK - $20/pr
• WILWOOD 3/4" REMOTE MASTER CYLINDER KIT, NEW IN THE BOX, MOCKED UP, NEVER INSTALLED, PART NO. WIL260-3374 - $45
• WILWOOD SCALLOPED BRAKE ROTOR - .810" THICK, 8x7.00" BOLT CIRCLE - P.N. WIL160-8135, MOCKED UP, NEVER USED - $60
• SEMI-METALLIC BRAKE PADS - NEW NAPA SEMI-METALLIC BRAKE PADS FOR '73-'77 GM MID SIZE - $15/set of 4
• SUMMIT DIAL BRAKE PROPORTIONING VALVE - GOOD WORKING CONDITION, BLACK ANODIZED FINISH - $30
• 3" DOUBLE HOLE BRAKE DUCT, 5" X 9 3/4" DOUBLE HOLE 3" BUMPER MOUNT BRAKE DUCT, FIVE STAR PART NO. FIV7008, LIKE NEW CONDITION, NEVER INSTALLED OR DRILLED - $15
• (2) DIRECTION VANE BRAKE ROTOR, 1 1/4" THICK, 11 3/4" SCALLOPED BRAKE ROTOR, *NEW* ROTOR, OLD INVENTORY, COLEMAN PART NO. COLDC36, LEFT SIDE - $50/EA
• LOCK RESISTANT BRAKE DIAPHRAGM - IN-LINE BRAKE DIAPHRAGM MADE BY DAN PRESS INDUSTRIES - INSTALLS IN THE REAR BRAKE LINE AND ACTS AS A BRAKE LINE "SHOCK ABSORBER" TO RESIST BRAKE LOCK UP, P.N. LBS-1 - $35
• OVAL CRAFT DUAL INLET BRAKE DUCT - ALL ALUMINUM DUAL BRAKE INLET DUCT, 3" DIA. INLETS, ADAPTS TO MOST SWEET MFG SPINDLES AND OTHERS, P.N. 06004 - $20 (QTY of 2)
• FIVE STAR BUMPER MOUNT BRAKE DUCT - DUAL HOLE DUCT WITH SCREENED FRONT - FIVE STAR P.N. FIV7008 - $15 (QTY of 2)
• FIVE STAR BUMPER MOUNT BRAKE DUCT - DUAL HOLE DUCT WITH SLIGHT ANGLE - LEFT SIDE - FIVE STAR P.N. FIV 000-411DL - $15
• FIVE STAR BUMPER MOUNT BRAKE DUCT - DUAL HOLE DUCT WITH SLIGHT ANGLE - LEFT SIDE - FIVE STAR P.N. FIV 000-411DR - $15
• TILTON LEVER STYLE PROPORTIONING VALVE - 7 POSITION LEVER PROPORTIONING VALVE - GOOD WORKING CONDITION - TILTON P.N. TIL90-200 - $55-SOLD
• SIERRA DPI SURE STOP BRAKE LOCK RESISTANT BRAKE "SHOCK ABSORBER" - GOOD USED CONDITION, INSTALLS IN REAR BRAKE LINE AND ACTS AS A BRAKE LINE SHOCK ABSORBER - TAKES OUT BRAKE SPIKES - LHC P.N. 005-LBS-1 - $45
• STEEL CRANK STYLE BRAKE ADJUSTER - INTERMEDIATE (25") CRANK STYLE BRAKE ADJUSTER - GOOD USED SHAPE, WORKS FINE - $15
• STEEL CRANK STYLE BRAKE ADJUSTER - INTERMEDIATE (23") CRANK STYLE BRAKE ADJUSTER - GOOD USED SHAPE, WORKS FINE - $15
• TILTON DIAL BRAKE ADJUSTER - 41" CABLE, TURNS FINE - P.N. 72-501 - $25
• TILTON DIAL BRAKE ADJUSTER - 70" CABLE, (CAN BE TRIMMED) - *NEW* IN THE BOX - BILLET KNOB - FITS 7/16"x20 BALANCE BAR - P.N. 72-407 - $45-SOLD
• DETMAR 3" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 2.6amp, 3" OD IN/OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - $15 (QTY of 9)-(8) SOLD (1) LEFT
• DETMAR STYLE 3" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 2.6amp, 3" OD IN/OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - ADAPTER DUCT ADDED TO REDUCE TO 1/8"x5" WIDE - $15
• DETMAR STYLE 3" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, 3" OD IN/OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - $10
• DETMAR STYLE 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, 4" IN W/6" FLANGE / 4" OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - $10
• DETMAR 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, 4" IN/3" OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - $10 (QTY of 9)-SOLD (2), (7) LEFT
• DETMAR 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, 4" IN/3" OUT - MOUNTING TABS INTACT - $10 (QTY of 4)
• DETMAR 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, 4" IN/4" OUT - MOUNTING TABS TRIMMED TO FIT BETTER IN LINE - $10
• DUAL DUCT W/DETMAR STYLE 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, UPPER HOLE IS 4" OD IN/OUT - DUAL DUCT W/3" LOWER OPENING - SS SCREEN W/FLANGE IN GOOD USED SHAPE WITH ONLY ONE MINOR STRESS CRACK BY ONE MOUNTING TAB - $15 (QTY of 2)
• DUAL DUCT W/DETMAR STYLE 4" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, UPPER HOLE IS 3" OD IN/OUT - DUAL DUCT W/3" LOWER OPENING - SS SCREEN W/FLANGE IN GOOD USED SHAPE WITH ONLY ONE MINOR STRESS CRACK BY ONE MOUNTING TAB - $15
• DUAL DUCT W/DETMAR STYLE 4" IN LINE BRAKE BLOWERS - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT - 160cfm, DUAL BLOWERS IN UPPER AND LOWER HOLE IS 4" OD IN/OUT - DUAL DUCT SS SCREEN W/FLANGE IN GOOD USED SHAPE WITH ONLY ONE MINOR WEAR CRACK - $25
• TILTON DIAL BRAKE ADJUSTER - 28" CABLE, TURNS FINE - P.N. 72-501, FAIR SHAPE, NEEDS THREADED END - $10
• CUSTOM DIAL BRAKE ADJUSTER - HOMEMADE 30" CABLE, TURNS FINE - STEEL ROD WITH HANDLE AND FLEXIBLE LINE ON THE END - GOOD CONDITION - NEEDS A MOUNTING SLEEVE/BRACKET - $10 
• DETMAR STYLE 3" IN LINE BRAKE BLOWER - NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT, 160cfm, 3" IN/ 3" OUT - MOUNTING TABS INTACT - OLDER BLOWER W/18" of HIGH TEMP DUCT - $10
• DETMAR STYLE 4" IN LINE BRAKE BLOWER - OLDER NASCAR/ARCA/LATE MODEL STYLE IN LINE BRAKE BLOWER - TESTED GREAT, 160cfm, 6"x10" RECTANGULAR INLET/ 3" OUT - MOUNTING TABS TRIMMED TO FIT BETTER - $10
• NOSE/ BRAKE DUCT/ STAINLESS SCREENING - (1) PC COARSE MESH, (1) PC FINE MESH AND STAINLESS FRAMING 4 1/2" x 9 1/2" - $5
• CUSTOM CARBON FIBER AIR DUCT - AIR DUCT WITH (2) 3" INLETS AND A CUSTOM WIDE OUTLET THAT WOULD NEED SOME CUSTOMIZING - $5
• BUTLER BUILT BRAKE DUCT - BUMPER MOUNT BLACK PLASTIC BRAKE DUCT - 5"x9" OPENING with 3" OFFSET SINGLE HOLE - GOOD SHAPE - NO CRACKS - OLDER BUT GOOD - $10 (QTY of 2)-BOTH SOLD
• BUTLER BUILT BRAKE DUCT - BUMPER MOUNT BLACK PLASTIC BRAKE DUCT - 5"x9" OPENING with (2) 3" OUTLETS - GOOD SHAPE - NO CRACKS - OLDER BUT GOOD - $10 (QTY of 2)
• BUTLER BUILT BRAKE DUCT - BUMPER MOUNT BLACK PLASTIC BRAKE DUCT - 5"x9" OPENING with (2) 3" OUTLETS - GOOD SHAPE - NO CRACKS - OLDER BUT GOOD - HAS A CUSTOM ALUM DIVIDER ADDED TO IT - $10
• HIGH TEMPERATURE 3" BRAKE DUCT HOSE - 3' I.D./ ORANGE IN COLOR - GOOD CONDITION, UP TO 600deg HEAT - 28" TOTAL LENGTH - $12
• BRAKE SHUT-OFF MECHANISM - SMALL PANEL REMOVED FROM A CAR WITH PLUMBED SHUT-OFF WITH ADAPTER FITTINGS TO PLUMB FROM 3/16" STEEL LINE TO PLASTIC LINES - $10
• COLEMAN 2:1 CRANK BRAKE ADJUSTER - 42" CABLE, TURNS NICE - BOLT ON STYLE - P.N. 20791, NICE SHAPE - $50
• TILTON DIAL BRAKE ADJUSTER - 35" CABLE, TURNS FINE - P.N. 72-501, DECENT SHAPE - $20-SOLD
• WINDOW MOUNT DUAL HOLE BRAKE DUCT - GOOD CONDITION USED CLEAR PLASTIC - MOUNTS IN WINDOW POSITION (2) 3" HOLES - $15

• PEDALS  - BRAKE, CLUTCH and THROTTLE (and pedal accs) -
• UB MACHINE ANGLE MOUNT THROTTLE PEDAL W/1 TAB TRIMMED - $12
• UB MACHINE ANGLED GAS PEDAL - $10
• STANDARD USED TOE RETURN THROTTLE PEDAL - $10
• COLEMAN ADJUSTABLE GAS PEDAL - LIGHTWEIGHT ADJUSTABLE GAS PEDAL, ROLLER TIPPED PEDAL WITH ADJUSTABLE ENDS, HAS HAD SLIGHT MODIFICATIONS WITH SHORTER TAB RETURNS, COLEMAN P.N. COL 19460 - $115
• FLAT STYLE AFTERMARKET THROTTLE PEDAL - SIDE MOUNT, NO TOE RETURN - $10
• CNC BRAKE PEDAL ASSEMBLY - P.N. 204SLMC, FLOOR MOUNT BRAKE PEDAL W/AFCO MASTER CYLINDERS - 7/8" and 1" (CYLINDERS ARE RECOND AND HAVE BEEN HYDRAULIC PRESSURE CHECKED TO HOLD GOOD PRESSURE) ASSEMBLY LOOKS AND WORKS LIKE NEW - $135
• WILWOOD BRAKE PEDAL ASSEMBLY - P.N. 340-1285, (FLOOR BRAKE PEDAL) W/AFCO MASTER CYLINDERS - 7/8" and 1" (CYLINDERS ARE RECOND AND HAVE BEEN HYDRAULIC PRESSURE CHECKED TO HOLD GOOD PRESSURE) ASSEMBLY LOOKS AND WORKS LIKE NEW - $135
• HOWE DUAL PEDAL ASSEMBLY - (FORWARD MOUNT HANGING PEDAL) WITH AFCO CYLINDERS - 3/4", 7/8" and 1" (CYLINDERS ARE RECOND AND HAVE BEEN HYDRAULIC PRESSURE CHECKED TO HOLD GOOD PRESSURE) OLDER VERSION of P.N. HOW 5262, BUT FORWARD MOUNT, ALUMINUM FRAME, ADJUSTED STEEL PEDALS, WITH 7 to 1 RATIO, ASSEMBLY LOOKS AND WORKS NICE - $225
• STEEL CRANK STYLE BRAKE ADJUSTER - 18" LONG CRANK STYLE BRAKE ADJUSTER - $10
• STEEL CRANK STYLE BRAKE ADJUSTER - LONG (32") CRANK STYLE BRAKE ADJUSTER - $15
• BIRKHOFFER STYLE ROLLER BEARING THROTTLE PEDAL - USED STEEL PEDAL IN VERY GOOD SHAPE - 30deg SIDE MOUNTING - $70 (QTY of 2)-SOLD (1), (1) LEFT
• STANDARD SIDE MOUNT STEEL THROTTLE PEDAL - GOOD CONDITION, A COUPLE OF SEASONS OF USE - UB MACHINE, 45deg SIDE MOUNT, MINOR MODIFICATIONS, INCLUDING A TRIM TO THE MOUNTING FLAT AND A 6" FLAT PAD ADDED TO THE FLAT - $10
• WILWOOD BRAKE PEDAL ASSEMBLY - FLOOR MOUNT 6:1 RATIO - MEASURES 10" TOTAL HEIGHT - ASSEMBLY LOOK AND WORKS NICE - COMPLETE WITH SMOOTH OPERATING BALANCE BAR - WILWOOD P.N. 340-1285 - $75 (QTY of 5) -SOLD (3), (2) LEFT
• TILTON CLUTCH and BRAKE DUAL PEDAL ASSEMBLY - HANGING FORWARD SWING MOUNT - ALUM FRAME/STEEL PEDALS - MEASURES 12" FROM PEDAL TIP to PIVOT - CLUTCH PEDAL IS MODIFIED A SLIGHT BIT TO BE ANGLED OVER TO THE LEFT 1" - REMOVED FROM A DEI CUP CAR - ASSEMBLY LOOKS AND WORKS NICE - COMPLETE WITH SMOOTH OPERATING HD 7/16" BALANCE BAR - TILTON P.N. 72-606 - $135-SOLD
• STANDARD SIDE MOUNT STEEL THROTTLE PEDAL - GOOD CONDITION, BLACK POWDER COAT - A COUPLE of SEASONS of USE - UB MACHINE, STRAIGHT SIDE MOUNT - $10
• WILWOOD BRAKE PEDAL ASSEMBLY - HANGING SWING MOUNT 7:1 RATIO - MEASURES 12 1/2" TOTAL HEIGHT - ASSEMBLY LOOKS AND WORKS NICE - COMPLETE WITH SMOOTH OPERATING BALANCE BAR - WILWOOD P.N. 340-1287 - $75
• WILWOOD BRAKE PEDAL BALANCE BAR - GREAT CONDITION COMPLETE HEAVY DUTY BALANCE BAR ASSEMBLY WITH EXCELLENT THREADS - HD VERSION of P.N. 340-1757 WITH 1/2" F THREAD ASSEMBLY - $25

• CALIPERS/BRACKETS/ETC
• OUTLAW 4000 SERIES CALIPER, OUTLAW PART NO. 170-3800, LEFT SIDE, 1.75, 1.62, PISTONS ACTUATE GOOD WITH AIR - $85
• WILWOOD SUPERLITE III 4 PISTON BRAKE CALIPER - Very good condition caliper, P.N. 120-3060RS, 1.75"/1.62" pistons, up to 1.25" rotor (actuates good with no leaks, when tested) - $95 (qty 2)-SOLD (1), (1) LEFT
• WILWOOD SUPERLITE II 4 PISTON BRAKE CALIPER - Very good condition caliper, P.N. 120-0468, 1.25"/1.25" pistons, up to 1.25" rotor (actuates good with no leaks, when tested) - $75 (qty 2)
• CLAMP ON 7 1/16" MOUNTING BRAKE CALIPER BRACKETS - $10EA
• (4) SUPERLITE CALIPER BOLT-ON CLAMP BRACKETS - $15EA
• BOLT-ON CALIPER BRACKETS, FOR BIG 7 1/16" CALIPER MOUNTING TO 3" AXLE, LIKE NEW - from $15EA
• BOLT-ON CALIPER BRACKETS FOR PINTO SPINDLE TO METRIC CALIPER - $15EA
• NUMEROUS BRAKE BRACKETS, LOWER CONTROL ARM BRACKETS FOR PORT CITY & LEFTHANDER CHASSIS, STARTING AT $5 each
• CLAMP ON REAR CALIPER BRACKET FOR BIG 7/16" CALIPER MOUNTING - $5
• COLEMAN ALUMINUM CALIPER BRACKETS, NICE CONDITION PAIR, BOLT-ON, COLEMAN PART NO. 819-205 - $40/PAIR
• COLEMAN CLAMP-ON STEEL CALIPER BRACKET - GOOD USED CONDITION, COLEMAN P.N. 820-101, FITS GM MID-SIZE METRIC CALIPERS - $20
• WILWOOD SUPERLITE 4-PISTON BRAKE CALIPER. VERY GOOD CONDITION CALIPER, SIMILAR TO PART NO. WIL120-3061, 1.75"/1.75" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING CURRENTLY SET UP FOR LS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR) - $65
• WILWOOD SUPERLITE4-PISTON BRAKE CALIPER. VERY GOOD CONDITION CALIPER, SIMILAR TO PART NO. WIL120-3193, 1.38"/1.38" PISTONS, UP TO 1.25" ROTOR, 3-1/2" MOUNTING, CURRENTLY SET UP FOR LS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR) - $65-SOLD
• WILWOOD SUPERLITE II 4-PISTON BRAKE CALIPER. VERY GOOD CONDITION CALIPER, SIMILAR TO PART NO. WIL120-0466. 1.75"/1.75" PISTONS, UP TO 1.00" ROTOR, 5-1/4" MOUNTING, CURRENTLY SET UP FOR LS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR) - $65
• CLAMP ON CALIPER BRACKET - LIKE NEW UNUSED CONDITION, CLAMP ON BRACKET - FITS 3 1/2" STANDARD CALIPER MOUNTING - P.N. ALL42109 - $20
• AFCO REAR CALIPER BRACKET - LIKE NEW CONDITION, AFCO P.N. AFC40124C - REAR 3 1/2" BOLT-ON MOUNTING - $20 (QTY of 2)
• REAR EMERGENCY BRAKE CALIPER - G-BODY STYLE CALIPER WITH EMERGENCY BRAKE PROVISION - FITS RIGHT REAR, NEW, NEVER INSTALLED - $70
• WILWOOD SUPERLITE 4 PISTON BRAKE CALIPER, GOOD CONDITION SPARE CALIPER, SIMILAR TO PART NO. WIL120-3061, 1.38"/1.38" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING, CURRENTLY SET-UP FOR RS MOUNTING, MISSING BRIDGE BOLTS (ACTUATES GOOD, WHEN TESTED WITH AIR)- $50-SOLD
• WILWOOD SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION CALIPERS, SIMILAR TO P.N. WIL120-5289, 2.75" PISTON, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $75/pr
• WILWOOD SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION CALIPERS, SIMILAR TO P.N. WIL120-5344, 2.38" PISTON, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $75/pr
• WILWOOD SUPERLITE 4 PISTON BRAKE CALIPER - SIMILAR TO P.N. 120-3001 - 1.625"/1.75" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING, CURRENTLY SET UP FOR RS MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR, MISSING PAD PIN AND CROSS TUBE) - $40
• U-B MACHINE METRIC FLOATING CALIPER BRACKET - 5 1/2" CALIPER MOUNTING - LEFT SIDE P.N. UBM 12-0450-L - NEEDS NYLON INSERT - $15
• CLAMP ON STANDARD SUPERLITE 3 1/2" BRAKE CALIPER STEEL BRACKET - 3 1/2" CALIPER MOUNTING, 3" O.D. AXLE TUBE - P.N. LHC 001-340-18 - LIKE NEW - $20 (QTY of 2)
• SIERRA XL-PLUS - 4 PISTON BRAKE CALIPER - VERY GOOD CONDITION SPARE CALIPER - 1.250" PISTONS, UP TO 1.25" ROTOR - 3.5" MOUNTING - CURRENTLY SET UP FOR RS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR, MISSING PAD PIN) - $75
• SIERRA XL-PLUS - 4 PISTON BRAKE CALIPER - VERY GOOD CONDITION SPARE CALIPER - 1.75"/1.875 PISTONS, UP TO 1.25" ROTOR - 3.5" MOUNTING - CURRENTLY SET UP FOR RS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR, MISSING PAD PIN) - $75
• WILWOOD SUPERLITE IIA 4 PISTON CALIPER - VERY GOOD CONDITION CALIPER - OLDER P.N. 120-3193 - 1.375" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING - CURRENTLY SET UP FOR LS MOUNTING (ACTUATES GOOD, WHEN TESTED WITH AIR, MISSING PAD CROSS BOLTS) - $40-SOLD
• COLEMAN FRONT IMPALA BRAKE CALIPER BRACKETS - NEW BRACKETS - P.N. CB-820-A - FITS FULL SIZE GM (IMPALA) FRONT SPINDLE BRACKETS for 11 3/4" AND 12" ROTORS - $5/pr
• CLAMP-ON SUPERLITE BRAKE CALIPER BRACKET - EXCELLENT LIKE NEW CONDITION, FITS 3 1/2" AXLE TUBES - U-B MACHINE P.N. 12-0422 - $20 (QTY of 2)
• CLAMP-ON SUPERLITE BRAKE CALIPER BRACKET - EXCELLENT LIKE NEW CONDITION, FITS 3 1/2" AXLE TUBES - LHC P.N. 001-340-18 - $20 (QTY of 2)
• CLAMP ON STEEL BRAKE BRACKET - STEEL 5 1/2" MOUNTING (METRIC MID-SIZE GM) CALIPER BRACKET - EXCELLENT CONDITION - FITS 3" AXLE TUBE - AFCO P.N. 40121C - $20 (QTY of 2)
• (6) METRIC CALIPER BOLTS - FITS FACTORY SMALL CALIPER MOUNTING - ONE PIECE CALIPER BOLTS W/ALLEN HEAD  - $10/set of 6
• WILWOOD RADIAL SUPERLITE 4 PISTON BRAKE CALIPERS - EXCELLENT CONDITION CALIPERS - RIGHT and LEFT CALIPERS P.N. 120-4570 and 120-4571 - 1.875" PISTONS, UP TO 1.50" ROTOR, 5 1/4" MOUNTING - INCLUDES USED 83 PADS, REMOVED FROM A CUP CAR (ACTUATES GOOD WHEN TESTED WITH AIR, COMPLETE AND IN GREAT SHAPE) - $300/pr
• 
• WILWOOD IR-GT BILLET RADIAL MOUNT 4 PISTON BRAKE CALIPER - EXCELLENT CONDITION CALIPER, LEFT SIDE BILLET RADIAL MOUNT CALIPER FROM A CUP CAR - (1) P.N. 120-5000-L with 1.125" PISTONS, UP TO .38" ROTOR, 3 1/2" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AR, COMPLETE AND IN GREAT SHAPE) - $150
• WILWOOD SUPER SPEEDWAY BILLET RADIAL MOUNT 4 PISTON BRAKE CALIPER - EXCELLENT CONDITION CALIPER, RIGHT SIDE BILLET RADIAL MOUNT CALIPER FROM A CUP CAR - P.N. 120-5428R WITH 1.75" PISTONS, UP TO .38" ROTOR, 5 1/4" MOUNTING WITH 1 1/4" EXTENSION BRACKET (ACTUATES GOOD WHEN TESTED WITH AIR, COMPLETE AND IN GREAT SHAPE) - $150
• HOWE SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION CAST IRON CALIPERS, REAR CALIPERS P.N. HOW33658 - 2 5/8" PISTONS, UP TO 1.25" ROTOR, 7 1/6" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $75/pr-SOLD
• WILWOOD SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION ALUMINUM CALIPERS, SIMILAR TO P.N. WIL120-5289 - 2.75" PISTON, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $75/pr
• SIERRA XL-PLUS 4 PISTON BRAKE CALIPER - DECENT CONDITION PAIR of CALIPERS - 1.25"/1.25" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING - MATCHED PAIR THAT ARE IN VERY GOOD USED SHAPE (CALIPERS ACTUATE GOOD WHEN TESTED WITH AIR, INCLUDES PAD PINS) - $100/pr
• STOCK CORVETTE HAT/ROTOR - *NEW* JUST OUT of THE BOX - CARRIED AS A SPARE - STOCK STYLE '85 CORVETTE ROTOR/HAT ROTOR IS 4 3/4" PATTERN, .800" THICK - $30
• PAIR of CLAMP ON METRIC G-BODY STEEL LOWER TRAILING ARM/BRAKE BRACKETS - STEEL 5 1/2" MOUNTING (METRIC MID-SIZE GM) CALIPER BRACKET AND STOCK LOWER TRAILING ARM BRACKETS - GOOD USED CONDITION - FITS 3" AXLE TUBE - $80/pr
• CLAMP ON STEEL BRAKE BRACKET - STEEL 7 1/16" MOUNTING (LARGE GM) CALIPER BRACKET - GOOD CONDITION, MISSING CLAMP SIDE - FITS 3" AXLE TUBE - LHC P.N. 001-340-28 - $5
• PERFORMANCE FRICTION RADIAL CALIPER MOUNTING BRACKETS - PERFORMANCE FRICTION P.N. 180.025.250.01 THROUGH BOLT HOLES ARE 5 1/4" ON CENTER - MOUNTING STUDS ARE 7 1/8" ON CENTER - $25/pr (QTY of 2)-SOLD (1), (1) LEFT
• RAYBESTOS ALCON BRAKE RADIAL CALIPER MOUNTING BRACKETS - (2) SINGLES - (1) RAYBESTOS P.N. PBC 5002, OTHER IS AN UNKNOWN BRAND BUT MEASUREMENTS MATCH - THROUGH BOLT HOLES ARE 5 1/4" ON CENTER - MOUNTING STUDS ARE 8 1/4" ON CENTER - $25/pr-SOLD
• WILWOOD GM III SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION ALUMINUM CALIPERS, BLACK ANODIZED FINISH - TRIANGULATED BRIDGE DESIGN - P.N. WIL120-5344 - 2.38" PISTON, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $95/pr
• WILWOOD GN STYLE 4 PISTON BRAKE CALIPER - VERY GOOD CONDITION CALIPER - P.N. 120-5264 - 1.75"/1.75" PISTONS, UP TO 1.25" ROTOR, 3 1/2" MOUNTING - CURRENTLY SET UP FOR LS MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $65
• 1 3/4" WIDE 2 BOLT BOLT-ON BRAKE CALIPER BRACKET OUTER STRAP - FITS 3" I.D. for STRAIGHT UP MOUNTING - $5
• ALUMINUM BOLT-ON BRAKE CALIPER BRACKET - PCR ALUMINUM BRACKET IN EXCELLENT CONDITION - 3" I.D. for 3 1/2" CALIPER MOUNTING - STRAIGHT UP MOUNTING - $35
• PAIR of PATHFINDER LW BOLT-ON BRAKE CALIPER BRACKETS - BOLT-ON SUPERLITE CALIPER BRACKETS IN EXCELLENT CONDITION, 3" I.D. for 3 1/2" CALIPER MOUNTING - STRAIGHT UP MOUNTING - LIGHT WEIGHT DESIGN - $40/pr
• PAIR of LHC BOLT-ON BRAKE CALIPER BRACKETS - LHC BOLT-ON SUPERLITE CALIPER BRACKETS IN EXCELLENT USED CONDITION, 3" I.D. for 3 1/2" CALIPER MOUNTING - STRAIGHT UP MOUNTING - $40/pr-SOLD
• AXLE CLAMP MOUNT - 3" I.D. AXLE CLAMP - 5/8" WIDE STEEL W/1 BOLT CLAMPING - P.N. ALL60143 - $4
• METRIC G-BODY SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION CAST IRON CALIPERS - STOCK DESIGN W/-4AN FITTINGS INSTALLED - P.N. 14025 and 14026 - 2 3/8" PISTON, UP TO 1.25" ROTOR, 5 1/2" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $40/pr
• OUTLAW 4000 SERIES 4 PISTON BRAKE CALIPER - DECENT CONDITION USED CALIPER - LEFT SIDE 1.75"/1.875" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING - USED CALIPER THAT HAS NORMAL WEAR - OLDER P.N. ORB170-1820 W/STAINLESS SHIELDS (SUPERCEDES TO CURRENT P.N. ORB170-3820) (CALIPER ACTUATES GOOD WHEN TESTED WITH AIR) - $50-SOLD
• WILWOOD MINI- DYNALITE 2 PISTON BRAKE CALIPER - GOOD CONDITION SPARE CALIPER - P.N. 120-0725 - SUPERCEDES TO P.N. 120-10188 - 1.75"/1.75" PISTONS, UP TO 3/8" ROTOR, 3 1/4" MOUNTING - CURRENTLY SET UP FOR LS MOUNTING, DESIGNED FOR SPRINT CAR APPLICATIONS (ACTUATES GOOD WHEN TESTED WITH AIR) - $35-SOLD
• SIERRA MGN PLUS 4 PISTON BRAKE CALIPER - GOOD CONDITION SPARE CALIPER - 1.75"/1.75" PISTONS - UP TO .810" ROTOR, 5 1/4" MOUNTING - DESIGNED FOR SPRINT CAR APPLICATIONS - MISSING PAD PIN (ACTUATES GOOD WHEN TESTED WITH AIR) - $50
• WILWOOD CALIPER THERMLOCK - ONE *NEW* SPARE PISTON - 1.88" DIA - P.N. 200-7550 - $20
• WILWOOD CALIPER STAINLESS STEEL PISTONS - SET of FOUR *NEW* SPARE PISTONS - 1.88" DIA - P.N. 200-7521 - $25/set of 4
• HOWE DUAL PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION ALUMINUM CALIPERS - NATURAL ALUMINUM FINISH - P.N. HOW33702 - 1 7/8" PHENOLIC PISTONS, FITS UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) - $95/pr-SOLD
• HOWE SINGLE PISTON STOCK MOUNTING BRAKE CALIPERS - PAIR of GOOD CONDITION CAST IRON CALIPERS - FRONT CALIPERS P.N. HOW337 - 2 15/16" PISTONS, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) MIGHT NEED NEW DUST BOOTS - $75/PR (QTY of 2pr)-SOLD
• HOWE SINGLE PISTON STOCK MOUNTING BRAKE CALIPER - GOOD CONDITION CAST IRON CALIPERS - FRONT CALIPER P.N. HOW337 - 2 15/16" PISTONS, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) MIGHT NEED NEW DUST BOOT - $35-SOLD
• HOWE SINGLE PISTON STOCK MOUNTING BRAKE CALIPER - GOOD CONDITION CAST IRON CALIPERS - REAR CALIPER P.N. HOW33658 - 2 5/8" PISTONS, UP TO 1.25" ROTOR, 7 1/16" MOUNTING (ACTUATES GOOD WHEN TESTED WITH AIR) MIGHT NEED NEW DUST BOOT - $35 
• SIERRA XL-PLUS 4 PISTON BRAKE CALIPER - DECENT CONDITION PAIR of CALIPERS - 1.75"/2.0" PISTONS, UP TO 1.25" ROTOR, 3.5" MOUNTING - MATCHED PAIR THAT ARE IN VERY GOOD USED SHAPE (CALIPERS ACTUATE GOOD WHEN TESTED WITH AIR - INCLUDES PAD PINS) (CURRENTLY BOTH RIGHT SIDE, ONE NEEDS BLEEDERS AND CROSSOVER TUBE FLIPPED AROUND) - $100/pr
• WILWOOD SUPERLITE 4 PISTON THERMOLOCK BRAKE CALIPERS - GOOD CONDITION CALIPERS, OLDER P.N.s 120-5531 and 120-5530 - 1.625"/1.88" PISTONS, UP TO 1.00" ROTOR, 3.5" MOUNTING - MATCHED PAIR THAT ARE IN VERY GOOD USED SHAPE (CALIPERS ACTUATE GOOD WHEN TESTED WITH AIR - INCLUDES PAD PINS) - $275/pr
• WILWOOD BILLET DYNALITE CALIPER - NICE USED WILWOOD CALIPER REMOVED AS THE INBOARD CALIPER from a SPRINT CAR - WILWOOD P.N. 120-1051 - 1.75" PISTONS, ACCEPTS UP TO 1/4" ROTOR - LOOKS TO HAVE LESS THAN (1) SEASON OF USE (ACTUATES GOOD WHEN TESTED WITH AIR) - $75
• WILWOOD DYNAPRO SINGLE BILLET DUAL PISTON BRAKE CALIPERS - EXCELLENT CALIPERS, P.N. 120-9687 (superceded P.N. 120-10188) - 1.75" PISTONS, UP TO .38" ROTOR, 3.5" MOUTNING - MATCHED PAIR WITH ONLY 200 STREET MILES ON THEM - INCLUDES INSTALLED PADS (ACTUATES GOOD WHEN TESTED WITH AIR) - $100/pr
• WILWOOD DYNAPRO SINGLE BILLET BRAKE CALIPER to PINTO SPINDLE BRAKE BRACKETS - EXCELLENT CONDITION BRACKETS, P.N. 249-0895R and 249-0895L MATCHED PAIR WITH ONLY 200 STREET MILES ON THEM - $40/pr-SOLD
• WILWOOD PROLITE 6R 6 PISTON RADIAL RACING CALIPERS - WILWOOD RADIAL MOUNT FRONT CALIPERS - WILWOOD P.N. 120-5760-FS and 120-5761-FS - 6 PISTON CALIPERS, PISTONS MEASURE 1.25", 1.25" and 1.625" - ACCEPTS UP TO 1.25" THICK ROTOR - MATCHED RIGHT AND LEFT CALIPERS THAT RETAIL FOR OVER $1500/PR - REMOVED RECENTLY FROM AN ARCA CAR - TESTED AND BOTH MOVE NICE AND ACTUATE FINE - INCLUDES RADIAL MOUNTING BRACKETS - $450/pr

SUSPENSION & STEERING

      SPINDLES, BALL JOINTS, 5x5 HUBS - 

• (2) WINTERS GN FLOATER HUB, BARE HUB, WITH .810" ROTOR AND STUDS, CHECKED FOR STRAIGHTNESS, READY TO GO - $75-SOLD (1), (1) LEFT
• GRAND NATIONAL HUB SEALS - PAIR of GN HUB SEALS, *NEW* AFCO P.N. AFC10383 and P.N. SCP2168, FITS ALL 2 1/2" GN HUB BRANDS - $7.50/pr
• GRAND NATIONAL HUB CAMBERED DRIVE FLANGES - COMPLETE PAIR of GN CAMBERED DRIVE FLANGES - P.N. QTR176200 - FITS ALL 2 1/2" GN HUB BRANDS - VERY GOOD CONDITION - LOW MILES - 5x5 PATTERN - $325/pr
• STEEL HOWE 5x5 HUB - OLDER HOWE 5x5 HUB W/DRIVE PLATE, GOOD OVERALL CONDITION, INCLUDES USED BEARINGS AND STUDS, 8 BOLT ROTOR PATTERN - $125
• COLEMAN STEEL DRIVE PLATE, GOOD OVERALL CONDITION, OLDER P.N. COL102106 - $50
• QUARTER MASTER CHAMBERED DRIVE PLATE - OLDER STYLE DRIVE PLATE FOR HOWE 5x5 HUBS (2" GN) - GOOD CONDITION DRIVE PLATE WITH NICE SPLINES - INCLUDES DUST COVER, NO PROBLEMS AT ALL - OLDER QMI P.N. QTR176400 - $150
• COLEMAN STEEL DRIVE PLATE, OLDER VERSION of COLEMAN PART NO. AF803, 5X4 3/4" and 5x5" BOLT PATTERN, GOOD CONDITION, NICE SPLINES, BARE FLANGE - $40
• COLEMAN 5x5 GN HUB DUST CAP - MACHINED ALUMINUM DRIVE FLANGE DUST CAP FOR COLEMAN 5x5 ALUMINUM GRAND NATIONAL HUB, P.N. COL803-100, EXCELLENT CONDITION WITH CAP SCREWS - $15
• HOWE STEEL GN 5x5 HUBS - APPEAR to be an older VERSION of HOWE 5x5 - 2 1/2" GN - NEARLY COMPLETE WITH STUDS, USED BEARINGS AND NUTS - 5x5 BOLT PATTERN - 8 BOLT ROTOR MOUNTING includes 1.25" thick used rotors within .010" run out - HUBS checked O.K. for run out - (ONE HUB AT .002", other at .003") - MISSING DRIVE PLATES - 5/8" FINE STUDS - GOOD CONDITION OLDER HUBS - $200/PR
• COLEMAN STEEL DRIVE PLATE - GOOD USED SHAPE - FITS IMCA AND SPORTSMAN STEEL HUBS - 5x5 and 5x4 3/4" - 5/8" STUDS - old COLEMAN P.N. COL140-425, current P.N. COL21632 - $40
• PAIR of ALUMINUM STOCK CAR PRODUCTS REAR HUBS - 5x5 GN - COMPLETE LMSC ALUM ASSEMBLIES (P.N. GN435) - WITH 10 BOLT ROTOR ADAPTER PLATES and STEEL DRIVE PLATES - 5x5 5/8" FINE THREAD STUDS - INCLUDES INSTALLED USED BEARINGS and SEALS - GOOD CONDITION WITH GOOD SPLINES - CHECKED GOOD FOR RUNOUT - $250/pr
• BARE HOWE ALUMINUM HUB - BARE HUB - CHECKED GOOD FOR RUNOUT - 10 BOLT ROTOR MOUNTING - HOWE P.N. 3655X - $75 (QTY of 2)-SOLD (1), (1) LEFT
• BARE HOWE ALUMINUM HUB - BARE HUB - CHECKED GOOD FOR RUNOUT - 10 BOLT ROTOR MOUNTING - INCLUDES OLDER USED 10 BOLT ATTACHED ROTOR - HOWE P.N. 3655X - $75
• PACK of 4 LOWER BALL JOINT SLEEVES - SMOOTH LOWER BALL JOINT SLEEVES WITH SHOULDER, 2.115" o.d., 1.745" i.d. - $20 for all 4
• ALUMINUM FRONT HUB DUST CAP - GOOD SHAPE, FITS SCP FRONT HUBS AND OTHERS - 3 BOLT MOUNTING, FLAT FACE STYLE - $5
• SCP STEEL DRIVE PLATE - GOOD USED SHAPE - FITS CUP STYLE HUBS AND A FEW OTHER BRANDS AS WELL - $10 (QTY of 2)
• COLEMAN BUILT WIDE 5 LM SPINDLE - *NEW* SPARE 7 deg SPINDLE - NEVER INSTALLED - APPEARS TO BE STANDARD RIGHT SIDE SPINDLE - COLEMAN P.N. 808-300-R (RETAILS for $188) W/WELDED CALIPER BRACKET AND BOLT ON STEERING ARM (P.N. 22911) - $75
• COLEMAN BUILT WIDE 5 LM SPINDLE - *NEW* SPARE SPINDLE - NEVER INSTALLED - APPEARS TO BE STANDARD LEFT SIDE SPINDLE - COLEMAN P.N. 808-300-L (RETAILS for $188) W/WELDED CALIPER BRACKET AND BOLT ON STEERING ARM - $75-SOLD
• COLEMAN BUILT WIDE 5 LM SPINDLE - *NEW* SPARE 5 deg SPINDLE - NEVER INSTALLED - APPEARS TO BE STANDARD RIGHT SIDE SPINDLE - COLEMAN P.N. 24002 RT (RETAILS for $266) COMPLETE W/BOLT ON STEERING ARM - $75 (QTY of 2)-BOTH SOLD
• HOWE 5x5 STEEL DRIVE PLATE - OLDER STYLE DRIVE PLATE for HOWE 5x5 HUBS - GOOD CONDITION DRIVE PLATE WITH NICE SPLINES INCLUDING DUST COVER CNC ETCHED "PCR" - ALSO FITS ACRO AND AT PERFORMANCE HUBS - OLDER HOWE P.N. HOW 20549 - $50
• COLEMAN DRIVE FLANGE - ALUMINUM DRIVE PLATE, 5x5 PATTERN, P.N. AF-803 - DECENT USED SHAPE - $40

          SHOCKS & SPRINGS

Used Shocks and Springs (Coil over, Barrel and Conventional) - $20 and up M&R Racing Equipment - Used Springs - Click here or on Picture for a Complete listing

•  General condition of shocks:
• Fair condition: Unknown age at least 1 season of use, minor dents, minor scrapes, feels decent.
• Good condition: Unknown age or over 1 season of use, very minor dents, minor scrapes, feels decent.
• Very good condition: About 1 season or less of age, generally no dents, no scrapes, feels very decent.
• Excellent condition: Less than 5 nights of age, no dents or problems.
•  
• We now have a Roehrig Shock Dyno in-house!!!

• all used shocks will be dynoed against ACTUAL RATES to assure their quality - most shocks NOW include dyno sheets !!!

• dyno results ON SHOCKS ARE ALL RATED AT COMPRESSION/REBOUND REGARDLESS of BRAND
•  
• TONS OF USED SHOCKS FROM 5 LAPS TO 1 SEASON OLD
•  
• USED BILSTEIN SHOCKS
• BILSTEIN 1 5/8" SMALL BODIED STEEL BODIED SHOCKS "S7M" SERIES
• (1) S7M4545 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4.5/4.5 - INCLUDES DYNO SHEET - $50
•  
• BILSTEIN 2" STEEL BODIED DIGRESSIVE SHOCKS "7Z" AND "9Z" SERIES
• (1) 6Z2020 - 6" SHOCK - VERY GOOD CONDITION - SCHRADER VALVE INSTALLED - RATES AT 3 - INCLUDES DYNO SHEET - $65
• (1) 7Z2010 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 1/2 - INCLUDES DYNO SHEET - $65
• (1) S7Zxxxx - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $65
• (1) S7Z3050 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $65
• (1) S7Z4040 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S7Z5050 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S7Z5050 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $65
• (1) S7Z7060 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 7/8 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CUSTOM VALVED SHOCK - RATES AT 7/10 - INCLUDES DYNO SHEET - $65
• (1) S9Z1020 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $65
• (2) S9Z3030 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $65-SOLD (1), (1) LEFT
• (1) S9Z3030 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S9Z4030 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S9Z4040 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S9Z4040 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $65-SOLD
• (1) S9Z5050 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $65
• (1) S9Z6010 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 1/5 - INCLUDES DYNO SHEET - $65
•  
• STOCK MOUNTING BILSTEINS
• (1) AK1044 - STOCK MOUNTING STEEL (REAR), EXCELLENT CONDITION, 3 NIGHTS OLD - $40
•  
• BILSTEIN 2" STEEL BODIED RACER REBUILDABLE DIGRESSIVE SHOCKS W/SCHRADER VALVE
• (1) BILB46-DTA8A - 8" SHOCK - GOOD CONDITION - CURRENTLY RATES AT 4/6 - INCLUDES DYNO SHEET - $100-SOLD
•  
• BILSTEIN 2" STEEL BODIED SHOCKS 
• CUSTOM REVALVED SHOCKS FROM A CRAFTSMAN TRUCK TEAM - STANDARD STEEL BODIED SHOCKS W/OVERSIZED METRIC ENDS (1/2" BUSHINGS ARE EASY TO PURCHASE AND INSTALL) 
• (3) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 3/8 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/8 - INCLUDES DYNO SHEET - $50
• (4) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/10 - INCLUDES DYNO SHEET - $50-SOLD (2), (2) LEFT
• (2) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/8 - INCLUDES DYNO SHEET - $50
• (2) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/9 - INCLUDES DYNO SHEET - $50
• (3) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/10 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/11 - INCLUDES DYNO SHEET - $50-SOLD
•  
• BILSTEIN 2" STEEL BODIED RACER REBUILDABLE SHOCKS W/SCHRADER VALVE (std snap ring take-apart)
• CUSTOM REVALVED SHOCKS FROM A CRAFTSMAN TRUCK TEAM - STANDARD STEEL BODIED SHOCKS W/OVERSIZED METRIC ENDS (1/2" BUSHINGS ARE EASY TO PURCHASE AND INSTALL) 
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 3/4 - INCLUDES DYNO SHEET - $50-SOLD
• (2) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 3/8 - INCLUDES DYNO SHEET - $50-SOLD 
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/7 - INCLUDES DYNO SHEET - $50-SOLD
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/10 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/8 - INCLUDES DYNO SHEET - $50-SOLD
• (2) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/9 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/10 - INCLUDES DYNO SHEET - $50
•  
• BILSTEIN 2" STEEL BODIED RACER REBUILDABLE SHOCKS W/SCHRADER VALVE AND THREAD-ON SHAFT SIDE CAP
• CUSTOM REVALVED SHOCKS FROM A CRAFTSMAN TRUCK TEAM - STANDARD STEEL BODIED SHOCKS W/OVERSIZED METRIC ENDS (1/2" BUSHINGS ARE EASY TO PURCHASE AND INSTALL) 
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 2/7 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/5 - INCLUDES DYNO SHEET - $50-SOLD
• (2) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/8 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/5 - INCLUDES DYNO SHEET - $50
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 4/15 (yes, 15) - INCLUDES DYNO SHEET - $50-SOLD
• (1) S8Xxxxx - 8" SHOCK - VERY GOOD CONDITION - CURRENTLY RATES AT 5/8 - INCLUDES DYNO SHEET - $50
•  
• MISC BILSTEINS
• STEEL FINE THREADED BODIED SHOCK - (1) BST8-8600 - 8" SHOCK -  GOOD CONDITION (OLDER DESIGN, FITS PENSKE COIL OVER KITS) - RATES AT 6 - INCLUDES DYNO SHEET - $45
•  
• USED AFCO SHOCKS
• AFCO STOCK MOUNT SERIES SHOCKS
• (2) 1022 - FRONT SHOCK - GOOD CONDITION - RATES GOOD (XTRA HEAVY/MED SPLIT) - $25
• (1) 1031 - REAR SHOCK - DECENT CONDITION -  RATES GOOD (HEAVY) - $20-SOLD 
• (1) 1035 - REAR SHOCK - EXCELLENT CONDITION - ONLY (1) NIGHT OLD - RATES GOOD (SOFT/HEAVY) - $35-SOLD
•  
• AFCO STEEL FIXED BEARING SHOCKS 1200 SERIES (WHITE)
• (1) 1273 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $35
• (1) 1275-3 - 7" SHOCK - FAIR CONDITION - (ONE 1/4" DENT, 1 1/2" LONG/APPEARS NO PROBLEMS/GOOD TEST SHOCK) - RATES AT 5/2 - INCLUDES DYNO SHEET - $20
• (1) 1275-3 - 7" SHOCK - GOOD CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - $35
• (1) 1275-3 - 7" SHOCK - GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $35
• (1) 1276 - 7" SHOCK - GOOD PHYSICAL CONDITION BODIED SHOCK, BUT A BIT SOFT - RATES AT 2/5 - INCLUDES DYNO SHEET - $25
• (2) 1276 - 7" SHOCK - GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $35
• (1) 1276 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 6/5 - INCLUDES DYNO SHEET - $35
• (1) 1276 - 7" SHOCK - DECENT CONDITION - ONE RUB MARK - PAINTED RED - RATES AT 6/7 - INCLUDES DYNO SHEET - $30-SOLD
• (1) 1276 - 7" SHOCK - GOOD CONDITION - (BODY END MOUNTING EYE TWEAKED 5 deg) - RATES AT 5/6 - INCLUDES DYNO SHEET - $30
• () 1276 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $35 
• (1) 1276 - 7" SHOCK - GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $35
• (1) 1276-2 - 7" SHOCK - DECENT CONDITION - ONE RUB MARK - RATES AT 6/2 - INCLUDES DYNO SHEET - $30-SOLD 
• (1) 1276-4 - 7" SHOCK - GOOD CONDITION - RATES AT 6/4 - INCLUDES DYNO SHEET - $35
• (1) 1276-4 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $35
• (3) 1276-4 - 7" SHOCK - GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $35
• (1) 1277-2 - 7" SHOCK - GOOD CONDITION - RATES AT 7/2 - INCLUDES DYNO SHEET - $35
• (1) 1293 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $35
• (2) 1293 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $35-BOTH SOLD
• (1) 1293 - 9" SHOCK - GOOD CONDITION - RATES AT 3 (ONE SMALL DENT) - INCLUDES DYNO SHEET - $35
• (1) 1293 - 9" SHOCK - GOOD CONDITION - (ONE 1/4" DENT/NO PROBLEMS) RATES AT 3 - INCLUDES DYNO SHEET - $35
• (1) 1293-5 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $35
• (1) 1293-5 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $35-SOLD
• (2) 1294 - 9" SHOCK - GOOD CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $35
• (1) 1295 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 1295 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $35
• (1) 1296 - 9" SHOCK - GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $35
•  
• AFCO STEEL FIXED BEARING SHOCKS 1000 SERIES (BLUE)
• (1) 1074 - 7" SHOCK - *NEW* IN THE BOX - SHELF WORN ONLY - $65
• (1) 1075 - 7" SHOCK - GOOD/FAIR CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $25
• (2) 1075 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $35
• (1) 1075 - 7" SHOCK - FAIR CONDITION (ONE DENT 1/4"x 1") - RATES AT 5/4 - INCLUDES DYNO SHEET - $20
• (1) 1076 - 7" SHOCK - *NEW* IN THE BOX - SHELF WORN ONLY - $65
• (1) 1076 - 7" SHOCK - FAIR CONDITION (ONE DENT 1/4"x 2") - RATES AT 4/5 - INCLUDES DYNO SHEET - $20
• (1) 1077 - 7" SHOCK - GOOD CONDITION - RATES AT 7/5 - INCLUDES DYNO SHEET - $30
• (1) 1077 - 7" SHOCK - GOOD CONDITION - RATES AT 6/7 - INCLUDES DYNO SHEET - $30
• (1) 1077-2 - 7" SHOCK - GOOD CONDITION - RATES AT 7/2 - INCLUDES DYNO SHEET - $30
• (1) 1093 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $35
• (1) 1093-5 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $30
• (1) 1094 - 9" SHOCK - VERY GOOD CONDITION - OLDER GOLD ANODIZED STYLE - RATES AT 4 - INCLUDES DYNO SHEET - $35
• (1) 1095 - 9" SHOCK - *NEW* IN THE BOX - SHELF WORN ONLY - $65
• (1) 1095 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $30-SOLD
• (1) 1095 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $30
• (1) 1095 - 9" SHOCK - GOOD/FAIR CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $30
• (1) 1095 - 9" SHOCK - GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $25
• (1) 1095 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $30
•  
• AFCO "EXTREME" SERIES STEEL BODY - GAS CHARGED MONO-TUBE (OLDER SHOCK MODEL) - 20 SERIES SHOCKS (BLUE)
• (1) 2073 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $50
•  
• AFCO STEEL BODY - REBUILDABLE 1500 SERIES SHOCKS - STEEL SMOOTH SMALL BODY
• (2) 1573-1 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/1 - INCLUDES DYNO SHEET - $35
•  
• AFCO ALUMINUM BODY - REBUILDABLE 1600 SERIES SHOCKS - ALUMINUM SMOOTH SMALL BODY
• (1) 1673S - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $75
• (1) 1675S - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $75
•  
• AFCO ALUMINUM BODY - REBUILDABLE 1600 SERIES SHOCKS - ALUMINUM THREADED SMALL BODY
• (1) 1671-3 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 1/3 - INCLUDES DYNO SHEET - $75
• (1) 1672 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $75
• (1) 1673-1 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/1 - INCLUDES DYNO SHEET - $75
• (1) 1674-1 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/1 - INCLUDES DYNO SHEET - $75
• (1) 1674 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/4 - INCLUDES DYNO SHEET - $75
• (1) 1674 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $75
•  
• AFCO STEEL BODY - REBUILDABLE 1900 SERIES SHOCKS (BLUE)
• (1) 1994 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $75
• (1) 1979-1 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 7/1 - INCLUDES DYNO SHEET - $75
•  
• AFCO "R" SERIES ALUMINUM SMOOTH BODY - LARGE BODY 1100 SERIES SHOCKS 
• (1) 1171-9 - 7" SHOCK - GOOD CONDITION - RATES AT 1/7 - INCLUDES DYNO SHEET - $75
• (1) 1171-14 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 1/11 - INCLUDES DYNO SHEET - $75
• (1) 1171-14 - 7" SHOCK - GOOD CONDITION - RATES AT 2/10 - INCLUDES DYNO SHEET - $75
• (1) 1172-6 - 7" SHOCK - GOOD CONDITION - RATES AT 2/5 - INCLUDES DYNO SHEET - $75
• (1) 1174-6 - 7" SHOCK - GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $75
• (1) 1193-5 - 9" SHOCK - GOOD CONDITION - RATES AT 2/5 - INCLUDES DYNO SHEET - $75
• (1) 1195-6 - 9" SHOCK - GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $75
•  
• AFCO "R" SERIES ALUMINUM THREADED BODY - 1300 SERIES SHOCKS 
• (1) 1352-1 - 5" SHOCK - VERY GOOD CONDITION - RATES AT 1 - INCLUDES DYNO SHEET - $75
• (1) 1352 - 5" SHOCK - VERY GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $75
• (1) 1375 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - INCLUDES INSTALLED COIL OVER KIT - $90-SOLD
• (1) 1375 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - INCLUDES INSTALLED COIL OVER KIT - $90-SOLD
• (1) 1375 - 7" SHOCK - GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $75
• (1) 1375 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $75-SOLD
• (1) 1376 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - INCLUDES INSTALLED COIL OVER KIT - $90
• (1) 1376 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $75-SOLD 
• (1) 1376-3T - 7" SHOCK - GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $75
• (1) 1376-4 - 7" SHOCK - GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $75
• (1) 1392 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $75
• (1) 1393-5 - 9" SHOCK - GOOD CONDITION - THREADED BODY GOOD to FAIR - RATES AT 2/3 - INCLUDES INSTALLED COIL OVER KIT - INCLUDES DYNO SHEET - $75-SOLD
• (1) 1394 - 9" SHOCK - GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $75
• (1) 1394 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - INCLUDES INSTALLED COIL OVER KIT - $90
• (2) 1394 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $75
• (1) 1395 - 9" SHOCK - GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $75
• (1) 1393 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $75-SOLD
•  
• AFCO "T1" SERIES DOUBLE ADJUSTABLE ALUMINUM THREADED BODY SHOCK 
• (1) AFC1770 - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS AT 1-5/1-8 - INCLUDES DYNO SHEET - $185-SOLD
• (1) AFC1770 - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS AT 2-6/1-8 - INCLUDES DYNO SHEET - $185-SOLD
• (1) AFC1770 - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS AT 2-6/1-9 - INCLUDES DYNO SHEET - $185-SOLD
• (1) AFC1770 - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS AT 2-7/3-11 - INCLUDES DYNO SHEET - $185
• 
•  
• USED CARRERA SHOCKS
•  
• CARRERA STOCK MOUNT SHOCKS - STEEL
• (2) 2858 - FRONT SHOCKS, GOOD CONDITION - $25
• (2) 2858 - FRONT SHOCK, EXCELLENT CONDITION - $30
• (1) 2856 - FRONT SHOCK, VERY GOOD CONDITION - $25
• (1) 2856 - FRONT SHOCK, VERY GOOD CONDITION, SLIGHT BEND IN MOUNTING TAB - $30
• (1) 2385 - REAR SHOCK, GOOD CONDITION - $25
• (1) 2385 - REAR SHOCK, GOOD CONDITION, TORN RUBBER MOUNT - $25
• (2) 2385 - REAR SHOCKS, EXCELLENT CONDITION - $30
•  
• CARRERA STEEL BODY 21 SERIES SHOCKS
•  
• CARRERA STEEL BODY 31 SERIES SHOCKS (NOW QA1 5500 SERIES) (CHROME BODIED)
• (1) DUMMY SHOCK - 7" CHROME STEEL BODY, NO RATING - $25
• (1) 3173/5 - 7" SHOCK - GOOD CONDITION (ONE SMALL SCRAPE) - RATES AT 4/3 - INCLUDES DYNO SHEET - $35
• (1) 3174 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $45
• (3) 3174 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $35
• (1) 3174 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $35
• (1) 3174 - 7" SHOCK - GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $35
• (1) 3174 - 7" SHOCK - GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $45
• (1) 3174 - 7" SHOCK - GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $45
• (1) 3174 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $45
• (1) 3174/6 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $35
• (1) 3175 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $45
• (1) 3175 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $35
• (1) 3175 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 3175 - 7" SHOCK - GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $45
• (1) 3175 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $45
• (1) 3176 - 7" SHOCK - GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $40
• (1) 3176 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $35-SOLD 
• (1) 3176 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 4/6 - INCLUDES DYNO SHEET - $35
• (1) 3176 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $45
• (1) 3177 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 6 - INCLUDES DYNO SHEET - $35
• (1) 3177 - 7" SHOCK - GOOD CONDITION - RATES AT 6 - INCLUDES DYNO SHEET - $40
• (1) 319x - 9" SHOCK - GOOD CONDITION - DUMMY SHOCK W/2" EXTENSION - RATES AT 0 - $25
• (2) 3194 - 9" SHOCK - GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $45
• (3) 3194 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $35
• (1) 3194 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $35
• (1) 3194 - 9" SHOCK - GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $45
• (1) 3195/3 - 9" SHOCK - GOOD CONDITION - ONE SMALL 1/4" DENT - RATES AT 2/4 - INCLUDES DYNO SHEET - $30
• (1) 3195 - 9" SHOCK - EXCELLENT CONDITION - RATES AT 2/5 - INCLUDES DYNO SHEET - $35
• (1) 3195 - 9" SHOCK - GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $45
• (1) 3195 - 9" SHOCK - GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $35
• (1) 3195 - 9" SHOCK - GOOD CONDITION - W/SCHRADER STYLE ADAPTER ON TOP - RATES AT 4/5 - INCLUDES DYNO SHEET - $35
•  
• CARRERA ALUMINUM THREADED BODY 61 SERIES
• (1) 6161/9 - 6" SHOCK - GOOD CONDITION - RATES AT 7/1 - INCLUDES DYNO SHEET - $65
• (1) 616x/9 SPL - 6" SHOCK - GOOD CONDITION - RATES AT 10/1 - INCLUDES DYNO SHEET - $65
• (1) 617x - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $75
• (1) 6174 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $65
• (2) 6174 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $65
• (1) 6174/6 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $65
• (1) 6175 - 7" SHOCK - NEWER VERSION P.N. 2075 - VERY GOOD CONDITION - RATES AT 4/6 - INCLUDES DYNO SHEET - $65-SOLD
• (1) 6176 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 6/5 - INCLUDES DYNO SHEET - $65
• (1) 6186/5 - 8" SHOCK - GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $65
• (1) 6187/6 - 8" SHOCK - GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $65
• (1) 6192 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $75
• (1) 6194/3 - 9" SHOCK - GOOD CONDITION - RATES AT 1/2 - INCLUDES DYNO SHEET - $65
• (1) 6194 - 9" SHOCK - GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $75
• (1) 6194 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $75
• (2) 6195 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $75
• (1) 6195 - 9" SHOCK - VERY GOOD CONDITION - HAS A SCHRADER VALVE PLUG INSTALLED - RATES AT 5/7 - INCLUDES DYNO SHEET - $75
• (1) 6196 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5/4 - INCLUDES DYNO SHEET - $75-SOLD
• (1) 6196/5 - 9" SHOCK - GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $65
•  
• (1) CARRERA ARS (ADVANCED RACING SUSPENSION) 6100 SERIES - REBOUND ADJUSTABLE - 7" ALUMINUM THREADED BODIED SHOCK - VERY GOOD CONDITION SHOCK - CARRERA SHOCK E6178-4/3 (was the LR) RATES AT 5/2-6 (comp/reb) - INCLUDES DYNO SHEET - $125
• (1) CARRERA ARS (ADVANCED RACING SUSPENSION) 6100 SERIES - REBOUND ADJUSTABLE - 7" ALUMINUM THREADED BODIED SHOCK - VERY GOOD CONDITION SHOCK - ONE SMALL 1/8" DENT - DOES NOT EFFECT RATE or COIL OVER SLEEVE - CARRERA SHOCK E6178-4/3 (was the RR) RATES AT 5/3-7 (comp/reb) - INCLUDES DYNO SHEET - $125
•  
• CARRERA ALUMINUM THREADED BODY 63 SERIES SMALL BODIED SHOCK
• (1) 6366 - 6" SHOCK - EXCELLENT CONDITION - RATES AT 6 - INCLUDES DYNO SHEET - $45
• (1) 6374 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 3 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 6374 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 3/4 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 6374 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 4/3 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 6374 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 4 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 6375 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 4 - INCLUDES DYNO SHEET - $35
• (1) 6375 - 7" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS AND CLAY STAINED - RATES AT 4/5 - INCLUDES DYNO SHEET - $35-SOLD
• (1) 6394 - 9" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS - RATES AT 3/4 - INCLUDES DYNO SHEET - $45
• (1) 6397/4 - 9" SHOCK - GOOD CONDITION - REMOVED FROM A 360 SPRINT - ONLY SMALL NICKS - RATES AT 4/6 - INCLUDES DYNO SHEET - $45
•  
• CARRERA ALUMINUM SMOOTH BODY 7100 SERIES 
• (1) 7173/5 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $75
• (1) 7195/4 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $75
• (1) 7195/3 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 2/5 - INCLUDES DYNO SHEET - $65
• (1) 7195/4 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $65
•  
• CARRERA ALUMINUM SMOOTH BODY 7300 SERIES 
• (1) 7376/4 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $50-SOLD
•  
• CARRERA ALUMINUM THREADED BODY 9100 SERIES 
• (1) 9176 - 9" SHOCK WITH COIL OVER KIT - VERY GOOD CONDITION - RATES AT 6/8 - INCLUDES DYNO SHEET 
• - CAN ALSO BE SOLD WITHOUT CO KIT FOR $20 LESS - $155
• (1) 9174 - 9" SHOCK WITH COIL OVER KIT - VERY GOOD CONDITION - RATES AT 2/5 - INCLUDES DYNO SHEET 
• - CAN ALSO BE SOLD WITHOUT CO KIT FOR $20 LESS - $155
• (1) 9175T - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $65
• (1) 9175/6 - 7" SHOCK - GOOD CONDITION - THREADS ARE RUBBED A LITTLE, BUT SPIN FINE - RATES AT 4/6 - INCLUDES DYNO SHEET - $65
• (1) 9176/3 - 7" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 2/8 - INCLUDES DYNO SHEET - $125
• (1) 9176/5 - 7" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 4/7 - INCLUDES DYNO SHEET - $125
• (1) 9175 - 7" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 4/6 - INCLUDES DYNO SHEET - $125
• (1) 9176 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/6 - INCLUDES DYNO SHEET - $125
• (1) 9176 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 6 - INCLUDES DYNO SHEET - $65
• (1) 9193 - 9" SHOCK - GOOD CONDITION - CUSTOM REVALVED BY SIMPLY SUSPENSION - RATES AT 3/2 - INCLUDES DYNO SHEET - $75
• (1) 9194 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $125
• (1) 919L4L3 - 9" SHOCK - GOOD CONDITION - CUSTOM REVALVED BY SIMPLY SUSPENSION - RATES AT 1/4 - INCLUDES DYNO SHEET - $75
• (1) 919L4L3 - 9" SHOCK - GOOD CONDITION - CUSTOM REVALVED BY SIMPLY SUSPENSION - RATES AT 3/1 - INCLUDES DYNO SHEET - $75
• (1) 9195/3 - 9" SHOCK - GOOD CONDITION - CUSTOM REVALVED BY SIMPLY SUSPENSION - RATES AT 3/2 - INCLUDES DYNO SHEET - $75
• (1) 9195/4 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $100
• (1) 9195/4 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/6 - INCLUDES DYNO SHEET - $75
• (1) 918-4 - 9" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 3/4 - INCLUDES DYNO SHEET - $95
• (1) 919L6L5 - 9" SHOCK - GOOD CONDITION - CUSTOM REVALVED BY SIMPLY SUSPENSION - RATES AT 2 - INCLUDES DYNO SHEET - $75-SOLD
• (1) 918-6/5B - 9" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 4/8 - INCLUDES DYNO SHEET - $75
• (1) 918-xx - 9" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 4/5 - INCLUDES DYNO SHEET - $95
• (1) 918-5 - 9" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 4/6 - INCLUDES DYNO SHEET - $95
• (1) 918-7/6B - 9" SHOCK - EXCELLENT CONDITION - REVALVED AND DYNOED - RATES AT 5/9 - INCLUDES DYNO SHEET - $75
•  
• CARRERA "94" SERIES ALUMINUM THREADED BODY 9400 SERIES - "GP" EXPANDED CHAMBER/ REBOUND ADJUSTABLE 
• -SOLD
•  
• USED INTEGRA SHOCKS
• INTEGRA 310 SERIES 7" STEEL BODIED SHOCKS
• (1) 310-43176-3 - 7" RACER REBUILDABLE - VERY GOOD CONDITION - RATES AT 6/3 - INCLUDES DYNO SHEET - $95-SOLD
•  
• INTEGRA STEALTH SERIES ALUMINUM GAS PRESSURE / RACER REBUILDABLE/REVALVEABLE THREADED BODIED SHOCK
• (1) 310-40193 - (RETAILS NEW for $349) - OLDER GOLD/RED ANODIZED COLORS - SAME CURRENT PARTS - SITTING FOR 3 YEARS - 9" RACER REBUILDABLE - EXCELLENT CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $150 (QTY of 2)
• (1) 310-40194 - (RETAILS NEW for $349) - OLDER GOLD/RED ANODIZED COLORS - SAME CURRENT PARTS - SITTING FOR 3 YEARS - 9" RACER REBUILDABLE - EXCELLENT CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $150
• (1) 310-40193-5 - (RETAILS NEW for $349) - OLDER GOLD/RED ANODIZED COLORS - SAME CURRENT PARTS - SITTING FOR 3 YEARS - 9" RACER REBUILDABLE - EXCELLENT CONDITION - RATES AT 3/6 - INCLUDES DYNO SHEET - $150
•  
• USED KONI SHOCKS
• 4 WAY ADJUSTABLE STEEL BODIED SHOCKS (W/ENDS)
• (1) KON30-6436 - 6" ADJUSTABLE SHOCK - GOOD CONDITION - (OLDER P.N. KON30-1307) - RATES AT 2/3 to 6 - INCLUDES DYNO SHEET - $60
• (3) KON30-6325 - 6" ADJUSTABLE SHOCK - GOOD CONDITION - (OLDER P.N. KON30-1303) - RATES AT 2/5 to 8 - INCLUDES DYNO SHEET - $60-SOLD (2), (1) LEFT
• (1) KON30-8436 - 8" ADJUSTABLE SHOCK - GOOD CONDITION - (OLDER P.N. KON30-1305) - RATES AT 3/6 to 9 - INCLUDES DYNO SHEET - $60
• (2) KON30-8436 - 8" ADJUSTABLE SHOCK - GOOD CONDITION - (OLDER P.N. KON30-1305) - RATES AT 3/5 to 8 - INCLUDES DYNO SHEET - $60 
•  
• USED PRO SHOCKS
• PRO STEEL/NON REBUILDABLE (WB) FIXED BEARING SHOCKS
• (1) WB735 - 7" SHOCK - LIKE NEW CONDITION - RATES AT 2/4 - INCLUDES DYNO SHEET - $30
• (1) WB74 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) WB74 - 7" SHOCK - VERY GOOD CONDITION, OLDER PAINTED STYLE - RATES AT 3/4 - INCLUDES DYNO SHEET - $30
• (1) WB75 - 7" SHOCK - LIKE NEW CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $30
• (1) WB75 - 7" SHOCK - LIKE NEW CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
• (1) WB75 - 7" SHOCK - GOOD CONDITION (ONE DENT/NO PROBLEMS) - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
• (1) WB75 - 7" SHOCK - GOOD CONDITION (ONE 1/4" DENT/NO PROBLEMS) - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
• (1) WB76 - 7" SHOCK - GOOD CONDITION, OLDER PAINTED STYLE - RATES AT 4/5 - INCLUDES DYNO SHEET - $30-SOLD
• (1) WB75 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $30
• (1) WB75 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
• (1) WB76 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $30-SOLD
• (1) WB76 - 7" SHOCK - GOOD CONDITION, OLDER PAINTED STYLE (ONE SMALL DENT, BUT OK)- RATES AT 6 - INCLUDES DYNO SHEET - $30
• (1) WB76 - 7" SHOCK - GOOD CONDITION (TWO SMALL DENTS, BUT OK) - RATES AT 5 - INCLUDES DYNO SHEET - $30-SOLD
• (1) WB77 - 7" SHOCK - EXCELLENT CONDITION - RATES AT 7/6 - INCLUDES DYNO SHEET - $30
• (1) WB763 - 7" SHOCK - GOOD CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $25
• (1) WB763 - 7" SHOCK - GOOD CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $30
• (1) WB791 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 6/1 - INCLUDES DYNO SHEET - $30 (QTY of 2)
• (1) WB93 - 9" SHOCK - GOOD CONDITION (ONE DECENT 1/4" DENT/NO APPARENT PROBLEMS) - RATES AT 2 - INCLUDES DYNO SHEET - $25
• (1) WB94 - 9" SHOCK - GOOD CONDITION (ONE SMALL DENT/NO APPARENT PROBLEMS) - RATES AT 3 - INCLUDES DYNO SHEET - $25
• (1) WB94 - 9" SHOCK - VERY GOOD CONDITION - OLDER GOLD PAINTED STYLE - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (3) WB94 - 9" SHOCK - GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) WB94 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) WB94 - 9" SHOCK - LIKE NEW CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $35
• (1) WB95 - 9" SHOCK - GOOD CONDITION (ONE DECENT 1/4" DENT/NO APPARENT PROBLEMS) - RATES AT 4/5 - INCLUDES DYNO SHEET - $25-SOLD 
• (1) WB953 - 9" SHOCK - GOOD CONDITION (TWO SMALL DENTS/NO APPARENT PROBLEMS) - RATES AT 4/2 - INCLUDES DYNO SHEET - $25-SOLD 
• (1) WB953 - 9" SHOCK - LIKE NEW CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - $30
• (1) WB95 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
• (1) WB95 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $30
•  
• PRO STEEL/NON REBUILDABLE REMOVABLE BEARING END SHOCKS (WITH ENDS)
• (2) 7300 - 7" SHOCK - GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $30
• (1) 7400 - 7" SHOCK - GOOD CONDITION - CHROMED - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) 7500 - 7" SHOCK - GOOD CONDITION - RATES AT 3/5 - INCLUDES DYNO SHEET - $30
• (1) 7530 - 7" SHOCK - GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) 7630 - 7" SHOCK - GOOD CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $30
• (1) 7700 - 7" SHOCK - GOOD CONDITION - RATES AT 6/7 - INCLUDES DYNO SHEET - $30-SOLD
• (1) 7910 - 7" SHOCK - VERY GOOD CONDITION - INCLUDES ENDS - RATES AT 7/1 - INCLUDES DYNO SHEET - $30-SOLD
• (1) 9000 - 9" SHOCK - DUMMY SHOCK - GOOD CONDITION - NO RATING - $20
• (1) 9400 - 9" SHOCK - VERY GOOD CONDITION - INCLUDES ENDS - RATES AT 3 - INCLUDES DYNO SHEET - $30
• (1) 9400 - 9" SHOCK - GOOD CONDITION - INCLUDES ENDS - RATES AT 4 - INCLUDES DYNO SHEET - $30
• (1) 9400 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $30
• (2) 9500 - 9" SHOCK - GOOD CONDITION - INCLUDES ENDS - RATES AT 4/5 - INCLUDES DYNO SHEET - $30
•  
• PRO STEEL/REBUILDABLE TAKE-APART REMOVABLE BEARING END SHOCKS (WITH ENDS)
• (1) TA740 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $45
• (1) TA743 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/2 - INCLUDES DYNO SHEET - $45
• (1) TA763 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5/3 - INCLUDES DYNO SHEET - $45
• (1) TA9xxx - 9" SHOCK - GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $45
•  
• PRO STEEL/STOCK MOUNTING SHOCKS
• (1) 7500 - W/STREET STOCK SHOCK ENDS (FRONTS), VERY GOOD CONDITION - $40
• (1) 7600 - W/STREET STOCK SHOCK ENDS (FRONTS), VERY GOOD CONDITION - $40
• (2) SS100 - FRONT SHOCK, GOOD CONDITION - RATES GOOD (HEAVY) - $20
• (3) SS201 - REAR SHOCK, GOOD CONDITION - RATES GOOD - $20
• (2) SS100A - FRONT SHOCKS, VERY GOOD CONDITION - $35
•  
• PRO "A" SERIES ALUMINUM SMOOTH BODY/REBUILDABLE SHOCKS
• (1) A530B - 5" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $65
• (1) A65-6 - 6" SHOCK - VERY GOOD CONDITION - RATES AT 5/7 - INCLUDES DYNO SHEET - $65
• (1) A740 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $65
• (1) A740 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $65
• (1) A750 - 7" SHOCK - GOOD CONDITION - ONE SMALL 1/8" DENT - RATES AT 4 - INCLUDES DYNO SHEET - $65
• (1) A752 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - $65
• (2) A791B - 7" SHOCK - VERY GOOD CONDITION - RATES AT 7/1 - INCLUDES DYNO SHEET - $65
• (1) A71-14B - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/12 - INCLUDES DYNO SHEET - $65
• (1) A840B - 8" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $65
• (2) A940 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $65
• (1) A950B - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4 - INCLUDES DYNO SHEET - $65
•  
• PRO "AC" SERIES ALUMINUM THREADED BODY/REBUILDABLE SHOCKS
• (1) AC73 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/3 - INCLUDES DYNO SHEET - $70
• (1) AC735 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/4 - INCLUDES DYNO SHEET - $70-SOLD
• (2) AC74 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 3/4 - INCLUDES DYNO SHEET - $70
• (1) AC746 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 2/7 - INCLUDES DYNO SHEET - $70
• (1) AC750 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 4/5 - INCLUDES DYNO SHEET - $70
• (1) AC76 - 7" SHOCK - VERY GOOD CONDITION - RATES AT 5 - INCLUDES DYNO SHEET - $70
• (1) AC92B - 9" SHOCK - VERY GOOD CONDITION - RATES AT 2 - INCLUDES DYNO SHEET - $70
• (1) AC94B - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $70
• (1) AC940 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 3 - INCLUDES DYNO SHEET - $70
• (1) AC942 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/1 - INCLUDES DYNO SHEET - INCLUDES 1" EXTENSION - $70-SOLD 
• (1) AC942 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - $70
• (1) AC953 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - $70
• (1) AC953 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/2 - INCLUDES DYNO SHEET - INCLUDES 1" EXTENSION - $70
• (1) AC953 - 9" SHOCK - VERY GOOD CONDITION - RATES AT 4/3 - INCLUDES DYNO SHEET - $70-SOLD
• (1) AC91B - 9" SHOCK WITH COIL OVER KIT - VERY GOOD CONDITION - RATES AT 1 - INCLUDES DYNO SHEET 
• - CAN ALSO BE SOLD WITHOUT CO KIT FOR $15 LESS - $85
• (1) AC97B - 9" SHOCK - VERY GOOD CONDITION - RATES AT 6 - INCLUDES DYNO SHEET - $70
•  
• PRO "AC" SERIES ALUMINUM THREADED BODY/REBUILDABLE REBOUND ADJUSTABLE SHOCKS
• (1) AC7xx - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS (5/8-11) - INCLUDES INSTALLED COIL OVER KIT - INCLUDES DYNO SHEET - $125 
• (1) AC7xx - 7" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS (4/3-7) - INCLUDES DYNO SHEET - $125 
• (1) AC9438B - 9" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS (4/3-8) - INCLUDES DYNO SHEET - $175-SOLD
• (1) AC9438B - 9" SHOCK - VERY GOOD CONDITION - RATES GOOD AT ALL INCREMENTS (4/3-8) - INCLUDES DYNO SHEET - $175-SOLD
•  
• PRO "ASB" SERIES ALUMINUM THREADED BODY/REBUILDABLE SMALL BODIED SHOCKS
• -SOLD
•  
• USED PENSKE SHOCKS
• PENSKE "7100" SERIES STEEL SMOOTH BODIED SHOCK - REBUILDABLE NON-ADJUSTABLE
• (1) PS-71626 - 6" SHOCK - EXCELLENT CONDITION - RATES GOOD AT 2/6 - INCLUDES DYNO SHEET - $125
•  
• PENSKE "7100" SERIES STEEL SMOOTH BODIED SHOCK - DOUBLE ADJUSTABLE - REMOTE CANISTER
• (1) PS-716xx - 6" SHOCK - EXCELLENT CONDITION - RATES GOOD AT 2-4/5-10 - INCLUDES DYNO SHEET - $250
•  
• PENSKE "7300" SERIES ALUMINUM SMOOTH BODIED SHOCK - REBOUND ADJUSTABLE
• (1) PS-7309SA - 9" SHOCK - EXCELLENT CONDITION - RATES GOOD AT 2/3-7 - INCLUDES DYNO SHEET - $225-SOLD
• (1) PS-7309SA - 9" SHOCK - EXCELLENT CONDITION - SHOCK WAS REMOVED FROM A CUP TEAM, SEALED WITH TALLADEGA/DAYTONA SEAL - RATES GOOD AT 3.5/4-10 (comp/reb) - INCLUDES DYNO SHEET - $250 (QTY of 2)-BOTH SOLD
• 
• (1) PS-7308SA - 8" SHOCK - EXCELLENT CONDITION - SHOCK WAS REMOVED FROM A TOP CRAFTSMAN TRUCK TEAM, FRESH FROM MARTINSVILLE - RIGHT FRONT W/1" EXTENSION - RATES GOOD AT 5/10-13 (comp/reb) - INCLUDES DYNO SHEET - $250
• (1) PS-7308SA - 8" SHOCK - EXCELLENT CONDITION - SHOCK WAS REMOVED FROM A TOP CRAFTSMAN TRUCK TEAM, FRESH FROM MARTINSVILLE - LEFT FRONT - RATES GOOD AT 3/10-13 (comp/reb) - INCLUDES DYNO SHEET - $250
•  
• USED QA1 SHOCKS
• QA1 STOCK MOUNT RACER REBUILDABLE SERIES SHOCKS
• (2) 3057 - FRONT SHOCK - GOOD CONDITION - RATES GOOD (HEAVY) - $45-SOLD (1), (1) LEFT
•  
• QA1 "50" SERIES STEEL BODY/REBUILDABLE SHOCKS
• -SOLD
•  
• QA1 "67" SERIES ALUMINUM THREADED BODY/REBUILDABLE SHOCKS
• -SOLD
•  
• USED MISC SHOCKS
• ADVANCED RACING SUSPENSION RACER REBUILDABLE/REVALVEABLE ALUMINUM THREADED BODY SHOCK - EXCELLENT CONDITION SHOCK - POSITIVE GAS CHARGED DESIGN - P.N. E4296-4/4 - RATES AT 4/5 - INCLUDES DYNO SHEET - RETAILS NEW for $300 - 7" SHOCK W/1 1/2" EXTENSION - NOW - $150
• ADVANCED RACING SUSPENSION RACER REBUILDABLE/REVALVEABLE ALUMINUM THREADED BODY SHOCK - EXCELLENT CONDITION SHOCK - POSITIVE GAS CHARGED DESIGN - P.N. E4296-4/4.5 - RATES AT 4/5 - INCLUDES DYNO SHEET - RETAILS NEW for $300 - 7" SHOCK W/1 1/2" EXTENSION - NOW - $150
• 2 KWIK ADJUSTABLE GAS CHARGED SHOCKS *NEW* SET of 4 - ORIGINALLY DESIGNED BY DERRICK COPE, THEN PURCHASED BY CV PRODUCTS BRIEFLY UNTIL BOUGHT OUT BY PRO SHOCKS - SET of 4 NEW SHOCKS, ALL (4) REBUILDABLE, (2) FRONTS ARE REBOUND ADJUSTABLE - PART NUMBERS ON SHOCKS ARE: 
• LF - P.N. A*/L(20)/D 2SWTJ  RF - P.N. B*/L(20)/C**5SWTJ  
• LR - P.N. A/DL(5x20)/B**6SWTJ  RR - P.N. C/DL(5x20)/B 6SWTJ  
• SHOCKS RATE AT:
• LF - comp 3/reb 9-12  RF - comp 5/reb 9-12
• LR - comp 2/reb 5  RR - comp 4/reb 4
• SET INCLUDES ALL DYNO SHEETS - ($1400 SET WHEN PURCHASED NEW ONLY 3 YEARS AGO) FULL SET of (4) NOW ONLY $600
•  
• MISC SHOCKS & ACCESSORIES
• 2" RUBBER SHOCK BUMPER AND BUMPER SPRING, USED PAIR IN GOOD SHAPE, RUBBER IS HEAVY RATE BLACK - $10
• COLEMAN 1" - 2 1/2" COIL OVER SPACER - SIMILAR to COLEMAN P.N. ST-409-1 - GOOD SHAPE - $10
• COLEMAN 2" - 2 1/2" COIL OVER SPACER - COLEMAN P.N. ST-409-2 - GOOD SHAPE - $10 (QTY of 2)
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (4) MISC BUMP STOPS, BLACK IN COLOR, 2 1/4" TALL - $20 (QTY of 2)
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (3) MISC BUMP STOPS, BLACK IN COLOR, 2 1/4" TALL - $15
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (4) MISC BUMP STOPS, BLACK IN COLOR, 1 3/4" - 2 1/4" TALL - SOME TRIMMED - $15
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (4) MISC BUMP STOPS, BROWN IN COLOR, 2 1/4" TALL - $20 
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (4) MISC BUMP STOPS, (2) GREEN IN COLOR, (2) BROWN IN COLOR, 2 1/4" TALL - $20 
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (2) MISC BUMP STOPS, BROWN IN COLOR, 3" TALL - $10
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (5) MISC BUMP STOPS, BROWN IN COLOR, 3/4" - 2 1/4" TALL - ALL TRIMMED - $20 
• AFCO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (6) MISC BUMP STOPS, BLACK IN COLOR, 5/8" - 1 1/2" TALL - ALL TRIMMED - $20 
• AFCO/PRO/PENSKE STYLE 4 RIB POLY BUMP STOPS - PACK of (5) MISC BUMP STOPS, BROWN AND YELLOW IN COLOR, 1 1/4" - 4" TALL - SOME TRIMMED - $20 
• ECONOMY BARREL STYLE POLY BUMP STOPS - PACK of (5) MISC BUMP STOPS, BLACK IN COLOR, 1 3/4" - 2 1/4" TALL - $15
• ECONOMY BARREL STYLE POLY BUMP STOPS - PACK of (6) MISC BUMP STOPS, BLACK IN COLOR, 1 1/8" - 1 3/4" TALL - $15
• ECONOMY BARREL STYLE POLY BUMP STOPS - PACK of (3) MISC BUMP STOPS, BLACK IN COLOR, 1 1/4" - 1 3/4" TALL - $15
• SPRING LOADED SHOCK PIN - VERY GOOD CONDITION, HANDLE HAS BEEN NARROWED - SPRING LOADED SHOCK PIN - $5
• AFCO COIL OVER TAKE-UP SPRING - NICE CONDITION, P.N. 27005 - 5LB RATING - $25
• PAIR of WEHRS MACHINE 1/2" DIA SHOCK BOLTS - PAIR of 1/2" DIA *NEW* SHOCK BOLTS - P.N. WM 148L - $5/pr
• A-1 RACE PRODUCTS 5" COIL OVER ADAPTER - BOTTOM PLATE ADAPTS FROM 2 1/2" SPRINGS to 5" SPRINGS ON COIL-OVERS - $8 
• KLUHSMAN RACE PRODUCTS 5" COIL OVER ADAPTERS - INCLUDES TOP AND BOTTOM PLATE - FITS CARRERA DIRT (OLDER STYLE) 3100 KRC P.N. 8828 (MISSING PIN) (QTY of 5)
• KLUHSMAN RACE PRODUCTS 5" COIL OVER ADAPTERS - BOTTOM PLATE ADAPTS FROM 2 1/2" SPRINGS to 5" SPRINGS ON COIL-OVERS - $8 (QTY of 8)
• KLUHSMAN RACE PRODUCTS 5" COIL OVER ADAPTERS - INCLUDES TOP AND BOTTOM PLATE - FITS STANDARD CARRERA 91 and 94 SERIES QA1 and OTHERS - similar to KRC P.N. 8828 (MISSING PIN) (QTY of 2)
• K-PRENE URETHANE STYLE 2 1/2" COIL OVER SPRING RUBBER - VERY GOOD CONDITION SPACER/RUBBER - RED (hardness) - .700" THICKNESS - $10 (QTY of 2)-BOTH SOLD
• K-PRENE URETHANE STYLE 2 1/2" COIL OVER SPRING RUBBER - VERY GOOD CONDITION SPACER/RUBBER - ORANGE (hardness) - .625" THICKNESS - $10-SOLD

       A-ARMS & CONTROL ARMS

• 68-72 CHEVELLE UPPER A-ARMS - $15EA,  AND TRAILING ARMS - $50 EACH
• '78-'88 METRIC G-BODY RIGHT SIDE LOWER A-ARM, POLY URETHANE BUSHINGS AND DECENT K727 BALL-JOINT - $50
• SPECIAL**'68-'72 CHEVELLE UPPER A-ARMS, BLASTED AND READY TO GO, $20 EACH OR $35/PR.
• SPECIAL**'73-'77 MID SIZE GM (CHEVELLE) UPPER A-ARMS, BLASTED AND READY TO GO, $20 EACH OR $35/PAIR
• HOWE U-CHANNEL, TRAILING ARM BRACKETS, 11" TALL, 1 1/2" WIDE, 3" DEEP - $20
• G-BODY METRIC CHEATER RIGHT SIDE LOWER CONTROL ARM, SECTIONED AND REWELDED, ARM IN EXTENDED 1", COMPLETE WITH BALLJOINT AND POLYURETHANE BUSHINGS - $65
• PAIR OF LOWER G-BODY METRIC LOWER ARMS, PAIR OF LOWER METRIC LOWER A-ARMS. LOWER SHOCK MOUNTS ADDED, POLYURETHANE BUSHINGS, GOOD BALL-JOINTS, LOWER PLATE ADDED FOR SWAY BAR, FRESH SPARES FROM A MID-AM SPORTSMAN - $75/PR
• (2) 5" WIDE X 4" TALL SPRING CUPS WITH 5/8" HEIM MOUNTS - $15 EACH
• STRUT STYLE LOWER CONTROL ARMS, 15" IN LENGTH, (2) TO CHOOSE FROM - $15 EACH
• '74-'77 MONTE, CHEVELLE, GM MID, UPPER A-ARM URETHANE BUSHING SET - $15
• LEFT SIDE MODIFIED UPPER A-ARM, 6 1/2" X 10" STEEL SWEDGES, CLEVIS, BALL JOINT HOLDER WITH SCREW-IN BALL JOINT AND 5/8" LH HEIMS, COMPLETE ARM, STRAIGHT, VERY FEW NIGHTS OF USE - $25
• RIGHT SIDE MODIFIED UPPER A-ARM, 5 1/2" X 11" STEEL SWEDGES, CLEVIS, BALL JOINT HOLDER WITH SCREW IN BALL JOINT AND 5/8" LH HEIMS, COMPLETE ARM, STRAIGHT, VERY FEW NIGHTS OF USE - $25
• METRIC G-BODY LOWER A-ARM, RIGHT SIDE, LOWER BALL JOINT WELDED IN, NEEDS NEW BUSHINGS, CLEANED AND PAINTED - $15
• G-BODY REAR TRAILING ARMS FOR '68-'72 CHEVELLE REAR-END, PAIR OF G-BODY REAR TRAILING ARMS MODIFIED (SHORT) FOR USING A '68-'72 A-BODY REAR END IN A G-BODY FRAME - $40/PR
• CLAMP ON STEEL BRAKE BRACKETS - PAIR of STEEL 5 1/4" MOUNTING (DYNALITE STYLE) CALIPER BRACKETS - MISSING CLAMP HALF - $25/pr
• FLEXI-FLYER '78-'88 G-BODY METRIC UPPER CONTROL ARMS - TRICK UPPER A-ARMS, MISSING CROSS SHAFTS, OFFSET MATCHING ARMS, USED IN THE FLEXI-FLYER KIT TO WIDEN a G-BODY CHASSIS 1 1/2" - $75/pr
• SOUTHWEST SPEED CHEVELLE CENTER LINK - *NEW* - IN THE PACKAGE (LISTS FOR $65) SOUTHWEST P.N. 107-227 - $50
• FLEXI-FLYER '78-'88 G-BODY METRIC STOCK LEFT UPPER CONTROL ARM - TRICK UPPER A-ARM - COMPLETE CORE WITH STOCK CROSS SHAFT AND BUSHINGS - SOME RUST PITS - USED IN THE FLEXI-FLYER KIT TO WIDEN G-BODY CHASSIS 1 1/2" - $20
• '64-'72 STOCK CHEVELLE LOWER CONTROL ARM - LEFT SIDE ONLY! - COMMON A-ARM FOR HARRIS and DIRTWORKS MODS. BALL JOINT & BUSHINGS NEED REPLACING - A-ARM IS BLASTED, WITH MINOR RUST PITTING, READY FOR YOUR APPLICATION - COMPLETE WITH ROUND/OVAL BUSHINGS - ONLY $65 (VERY LIMITED QUANTITIES)
• '78-'88 G-BODY METRIC FABRICATED REAR TRAILING ARMS - TRICK UPPER TRAILING ARMS - FABRICATED SQUARE TUBE DESIGN - OFFSET HOUSING-END HOLE, NEEDS NEW CUSTOM BUSHINGS - OTHER SIDE HAS STOCK GM RUBBER BUSHINGS - FROM CENTER TO CENTER TRAILING ARM MEASURES APPROXIMATELY 11 1/4" - $30/PAIR
• '78-'88 G-BODY METRIC RIGHT SIDE LOWER CONTROL ARM - '78-'88 G-BODY METRIC RIGHT SIDE LOWER CONTROL ARM - POLYURETHANE BUSHINGS INSTALLED - LARGE BALL JOINT HAS BEEN WELDED IN TO RAISE SPINDLE HEIGHT - CONTROL ARM HAS BEEN BLASTED AND PAINTED BLACK - $30
• '73-'77 GM STOCK UPPER TRAILING ARM - '73-'77 STOCK GM UPPER TRAILING ARM - COMES WITH GOOD RUBBER BUSHING - CENTER TO CENTER MEASURES APPROXIMATELY 12 13/16" - $15
• '68-'72 STOCK NOVA LOWER CONTROL ARM - "TRICK" A-ARM TO WIDEN THE TRACK AND ALTER THE CASTER OF G-BODY CHASSIS - BALL JOINTS & BUSHINGS NEED REPLACING - A-ARMS ARE BLASTED, WITH MINOR RUST PITTING, READY FOR YOUR APPLICATION - SINGLE (NOVA) RIGHT SIDE or G-BODY LEFT SIDE - $75 (QTY of 2)
• G-BODY REAR TRAILING ARMS - '78-'88 MID-SIZE G-BODY REAR END - PAIR of G-BODY REAR TRAILING ARMS WITH TRICK MONO-BALL BUSHINGS INSTALLED, NEVER RACED SINCE INSTALLED - $100/PR-SOLD
• MOOG SCREW-IN UPPER BALL JOINT - *NEW* IN THE BOX, SCREW-IN FOR ALL LEFTHANDER UPPERS AND OTHER MODELS, MOOG P.N. K-772 - $12 (QTY of 2)
• PAIR of UPPER CONTROL ARM BUSHINGS - G-BODY, FITS '78-'88 MID-SIZE GM, MONTE, CUTLASS, GRAND PRIX, ETC - PAIR for STOCK FRONT UPPER A-ARM (*NEW* OUT OF THE BOX) - $15/pr-SOLD
• WEHRS MACHINE A-ARM SPACER - 6" MOUNTING - 1/8" THICK - $2.50
• '68-'72 STOCK NOVA LOWER CONTROL ARM - "TRICK" A-ARM TO WIDEN THE TRACK AND ALTER THE CASTER OF G-BODY CHASSIS - BALL JOINTS & BUSHINGS ARE NEW - A-ARM IS NEW, READY FOR YOUR APPLICATION - SINGLE (NOVA) RIGHT SIDE or G-BODY LEFT SIDE POLYURETHANE BUSHINGS, RAISED ROLL CENTER LOWER BALL JOINT (LRG DIA 5651) AND SHOCK MOUNT ALSO INSTALLED - $105
• '64-'72 STOCK CHEVELLE LOWER CONTROL ARMS - THESE ARE THE COMMON A-ARMS USED FOR HARRIS AND DIRTWORKS MODS - A-ARMS WERE BLASTED AND PAINTED WITH MINOR RUST PITTING, READY FOR YOUR APPLICATION - COMPLETE MATCHED PAIR WITH NEW POLYURETHANE ROUND BUSHINGS AND NEW BALLJOINTS INSTALLED - $125/pr
• WEHRS MACHINE A-ARM CAMBER SHIMS - GM METRIC - (2) GM METRIC 6 15/16" - 1/8" THICK *NEW* - P.N. WM35125M - $8/pr
•  
• TUBULAR A-ARMS - BOLT-IN STYLE BALL JOINT
• 
• BOLT-IN UPPER CONTROL ARM - 7" A-ARM, LHC P.N. 001-270 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-270 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 1/4" A-ARM, similar to LHC P.N. 001-272 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - GOOD CONDITION - $15 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 7 1/4" A-ARM, AFCO BRAND, P.N. 20000S, similar to LHC P.N. 001-372 - STEEL SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 7 1/4" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-272 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 1/2" A-ARM, LHC P.N. 001-275 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 1/2" A-ARM, AFCO BRAND, similar to LHC P.N. 001-275 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 7 3/4" A-ARM, LHC P.N. 001-277 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 3/4" A-ARM, UNKNOWN BRAND, STEEL SHAFT/SLOTTED MOUNTING - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 3/4" A-ARM, AFCO BRAND, similar to LHC P.N. 001-277 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 7 3/4" A-ARM, UNKNOWN BRAND, similar to LHC P.N. 001-277 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8" A-ARM, similar to LHC P.N. 001-280 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - GOOD CONDITION - $15 (QTY of 2) 
• BOLT-IN UPPER CONTROL ARM - 8" A-ARM, PCR BRAND, similar to LHC P.N. 001-270 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 8" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-280 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8 1/2" A-ARM, LHC P.N. 001-285 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - GOOD CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8 1/2" A-ARM, COLEMAN BRAND, similar to LHC P.N. 001-385 - STEEL SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8 1/2" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-285 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8 1/2" A-ARM, similar to LHC P.N. 001-385 - STEEL SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 8 1/2" A-ARM, AFCO BRAND, P.N. 20004-1, similar to LHC P.N. 001-285 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 8 3/4" A-ARM, LHC P.N. 001-287 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, LHC P.N. 001-290 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 4)-SOLD (1), (3) LEFT
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, HOWE BRAND,  P.N. 22280 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, COLEMAN BRAND, similar to LHC P.N. 001-290 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, WARRIOR BRAND, similar to LHC P.N. 001-290 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-290 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 4)
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, AFCO BRAND, P.N. 20009, similar to LHC P.N. 001-290 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 3)
• BOLT-IN UPPER CONTROL ARM - 9" A-ARM, AFCO BRAND, similar to LHC P.N. 001-2107 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9 1/4" A-ARM, PCR BRAND, similar to LHC P.N. 001-292 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9 1/4" A-ARM, similar to LHC P.N. 001-292 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• BOLT-IN UPPER CONTROL ARM - 9 1/4" A-ARM, similar to LHC P.N. 001-395 - STEEL SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - GOOD CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9 1/2" A-ARM, UNKNOWN BRAND,  similar to LHC P.N. 001-295 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 9 1/2" A-ARM, HOWE BRAND,  P.N. 22287 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20 
• BOLT-IN UPPER CONTROL ARM - 10 1/2" A-ARM, RANDERCAR BRAND, similar to LHC P.N. 001-2105 - ALUM SHAFT - USES 081-1185 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $20-SOLD
•  
• TUBULAR A-ARMS - BOLT-IN STYLE BALL JOINT - 1 1/4" OFFSET
• SCREW-IN UPPER CONTROL ARM - 1 1/4" OFFSET - 8 1/2" A-ARM, UNKNOWN BRAND - STEEL SHAFT - USES 081-1162 BALL JOINT - 6 3/4" MOUNTING - GOOD CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 1 1/4" OFFSET - 8" A-ARM, UNKNOWN BRAND - STEEL SHAFT - USES 081-1185 BALL JOINT - 6 3/4" MOUNTING - GOOD CONDITION - $20 (QTY of 3)
• BOLT-IN UPPER CONTROL ARM - 1 1/4" OFFSET - 8 1/2" A-ARM, UNKNOWN BRAND - STEEL SHAFT - USES 081-1185 BALL JOINT - 6 3/4" MOUNTING - GOOD CONDITION - $20
• BOLT-IN UPPER CONTROL ARM - 1 1/4" OFFSET - 9 1/2" A-ARM, similar to LHC P.N. 001-495 - ALUM SHAFT/SLOTTED MOUNTING - USES 081-1185 BALL JOINT - 6" MOUNTING - GOOD CONDITION - $20
•  
• TUBULAR A-ARMS - SCREW-IN STYLE BALL JOINT
• 
• SCREW-IN UPPER CONTROL ARM - 7 1/2" A-ARM, LHC P.N. 001-175 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 7 1/2" A-ARM, similar to LHC P.N. 001-175 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 7 1/2" A-ARM, PSR BUILT - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 8" A-ARM, LHC P.N. 001-180 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 5)
• SCREW-IN UPPER CONTROL ARM - 8 1/4" A-ARM, LHC P.N. 001-182 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 8 1/2" A-ARM, LHC P.N. 001-185 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 8 1/2" A-ARM, LHC P.N. 001-100-850 - ALUM SHAFT/SLOTTED MOUNTING - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 8 3/4" A-ARM, LHC P.N. 001-187 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - VERY GOOD CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 8 3/4" A-ARM, LHC P.N. 001-187 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 2)-SOLD (1), (1) LEFT
• SCREW-IN UPPER CONTROL ARM - 9" A-ARM, LHC P.N. 001-190 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 2)
• SCREW-IN UPPER CONTROL ARM - 9 1/4" A-ARM, LHC P.N. 001-192 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - VERY GOOD CONDITION - $25  (QTY of 2)
• SCREW-IN UPPER CONTROL ARM - 9 1/2" A-ARM, LHC P.N. 001-195 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 
• SCREW-IN UPPER CONTROL ARM - 9 1/2" A-ARM, similar to LHC P.N. 001-195 - ALUM SHAFT/SLOTTED MOUNTING - USES 081-1162 BALL JOINT - 6" MOUNTING - VERY GOOD CONDITION - $25 
• SCREW-IN UPPER CONTROL ARM - 9 1/2" A-ARM, JOES RACING PRODUCTS, similar to LHC P.N. 001-197-10SS - STEEL SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 
• SCREW-IN UPPER CONTROL ARM - 9 1/2" A-ARM, PORT CITY RACING PRODUCTS, similar to LHC P.N. 001-197-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 
• SCREW-IN UPPER CONTROL ARM - 9 3/4" A-ARM, LHC P.N. 001-197 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 3)
• SCREW-IN UPPER CONTROL ARM - 9 3/4" A-ARM, JOE'S RACING PRODUCTS - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - LIKE NEW - $30
• SCREW-IN UPPER CONTROL ARM - 10 1/2" A-ARM, U-B MACHINE P.N. 19-1024 - STEEL SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 2)
• SCREW-IN UPPER CONTROL ARM - 8 1/4" A-ARM, FITS G-BODY RH - STEEL SHAFT - USES 081-1162 BALL JOINT - 6 7/8" MOUNTING - GOOD OLDER CONDITION - $20
•  
• TUBULAR A-ARMS - SCREW-IN STYLE BALL JOINT - 10deg 
• SCREW-IN UPPER CONTROL ARM, 10deg - 8 3/4" A-ARM, JOE'S RACING PRODUCTS BRAND - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - LIKE NEW - $30
• SCREW-IN UPPER CONTROL ARM, 10deg - 8 3/4" A-ARM, LHC P.N. 001-187-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM - 9" A-ARM, LHC P.N. 001-190-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 
• SCREW-IN UPPER CONTROL ARM, 10deg - 9" A-ARM, LHC P.N. 001-112-900-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" SLOTTED MOUNTING - VERY GOOD CONDITION - $25
• SCREW-IN UPPER CONTROL ARM, 10deg - 9" A-ARM, LHC P.N. 001-112-950-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" SLOTTED MOUNTING - VERY GOOD CONDITION - $25
• SCREW-IN UPPER CONTROL ARM, 10deg - 9" A-ARM, LHC P.N. 001-190-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM, 10deg - 9 1/4" A-ARM, LHC P.N. 001-192-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 8)
• SCREW-IN UPPER CONTROL ARM, 10deg - 9 1/2" A-ARM, LHC P.N. 001-195-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM, 10deg - 9 1/2" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
• SCREW-IN UPPER CONTROL ARM, 10deg - 9 3/4" A-ARM, LHC P.N. 001-197-10 - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25 (QTY of 2)
• SCREW-IN UPPER CONTROL ARM, 10deg - 9 3/4" A-ARM, JOE'S RACING PRODUCTS BRAND - ALUM SHAFT - USES 081-1162 BALL JOINT - 6" MOUNTING - LIKE NEW - $30 (QTY of 2)
• SCREW-IN UPPER CONTROL ARM, 10deg - 10 3/4" A-ARM, PSR/PATHFINDER - ALUM SHAFT/SLOTTED MOUNTING - USES 081-1162 BALL JOINT - 6" MOUNTING - EXCELLENT CONDITION - $25
•  
• TUBULAR A-ARMS - HEIM END MONO-BALL STYLE BALL JOINT
• MONO BALL UPPER CONTROL ARM - 10" A-ARM, PSR/PATHFINDER - ALUM SHAFT/SLOTTED MOUNTING - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20
•  
• TUBULAR A-ARMS - HEIM END MONO-BALL STYLE BALL JOINT - 10deg 
• 
• TUBULAR UPPER A-ARMS, 6" CENTER MOUNTING, STEEL SHAFT, HEIM END BALL-JOINT - $10 EACH : 6 1/2"   7"  7 1/2"
• MONO BALL UPPER CONTROL ARM, 10deg - 7 1/4" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20
• MONO BALL UPPER CONTROL ARM, 10deg - 7 1/2" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20
• MONO BALL UPPER CONTROL ARM, 10deg - 8" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20
• MONO BALL UPPER CONTROL ARM, 10deg - 9" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20 (QTY of 2)
• MONO BALL UPPER CONTROL ARM, 10deg - 9 1/2" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20 (QTY of 4)
• MONO BALL UPPER CONTROL ARM, 10deg - 10 1/4" A-ARM, PSR/PATHFINDER - ALUM SHAFT - USES MONO BALL - 6" SLOTTED MOUNTING - EXCELLENT CONDITION - $20 
•  
• TUBULAR A-ARMS - MISC
• 5 DEG LH BALLJOINT HOLDER - USES STANDARD SCREW-IN BALL JOINT - LIKE NEW - 5deg ANGLE - LH - $5 
• LEFTHANDER MODIFIED UPPER CONTROL ARM - RH - COMPLETE ASSEMBLY REMOVED FROM A LEFTHANDER CHASSIS MODIFIED, RH SIDE - LHC P.N. 001-700-2 - MISSING LONG SIDE "CASTER" TUBE - $20
•  

      SUSPENSION (FRONT) (SWAY BARS, BRACKETS, CLAMPS, ETC)

• ASSORTED UPPER SPRING PLATES - $5EA
• CUP TAKE-OFF SPRING SPACERS, FULL STOCK OF CUP TAKE-OFF RUBBER SPRING SPACERS, EQUIPPED WITH QUICK-GRAB CABLES, OVER 100 TO CHOOSE FROM - $8 EACH
• UPPER 5" and 5 1/2" SPRING PLATE CUPS $4ea
• SWIVEL SPRING CUPS FOR PENSKE SHOCKS, USED IN MANY ASPHALT LATE MODELS INCLUDING PATHFINDER, NICE USED SET, MADE BY RIGHTFOOT RACING PRODUCTS - $25/SET
• CUP TAKE-OFF SPRING SPACERS, FULL STOCK OF CUP TAKE-OFF RUBBER SPRING SPACERS, EQUIPPED WITH QUICK-GRAB CABLES, OVER 100 TO CHOOSE FROM - $8 EA
• RCP SOLID ROD END - 5/8" HOLE, 3/4" THREAD, RH THREADS, LIKE NEW - $15
• 14" STEEL WEIGHT JACK BOLT - LIKE NEW, STANDARD WEIGHT, P.N. 300-14 - $10 
• OLDER 1 1/8" FINE THREAD WEIGHT JACK ASSEMBLY - 1 1/8" FINE THREAD, 5" DIA SPRING CUP, 8" IN LENGTH JACK BOLT, GOOD CONDITION - $5 (QTY of 2)
• AFCO OLD STOCK HEIMS, (3) AFCAD10721T & (4) AFC10721T. ROD END, 3/4" LEFT HAND MALE,  ALUMINUM W/TEFLON LINER - $20/EA
• PACK of (6) ALUMINUM ROD END SPACERS - (6) USED SHOULDERED ROD END SPACERS 1/2" I.D., 1 1/4" "L - $7.50/all-SOLD
• STANDARD COIL SPRING SPACER - *NEW*, NEVER INSTALLED, P.N. ALL56116, FITS 5" AND 5 1/2" SPRINGS - $15
• AFCO CENTERED CLAMP-ON SHOCK BRACKET - EXCELLENT CONDITION FOR 1 1/2" ROUND TUBING - $10 (QTY of 2)
• 8" STEEL WEIGHT JACK BOLT - GOOD SHAPE, STANDARD WEIGHT - P.N. 300-8 - $5 (QTY of 2)
• 3/4" HEIM JOINT ASSORTMENT - (3) HD TEFLON LINED 3/4" HEIMS - (2) RH w/1/2" REDUCERS, (1) LH - (3) GOOD CONDITION USED HEIMS WITH JAM NUTS - $25/ALL
• 3/4" HEIM JOINT ASSORTMENT - (2) HD TEFLON LINED 3/4" HEIMS - (2) RH GOOD CONDITION USED HEIMS WITH JAM NUTS - $20/ALL
• 3/4" HEIM JOINT ASSORTMENT - (3) HD TEFLON LINED 3/4" HEIMS - (2) RH, (1) LH GOOD CONDITION USED HEIMS WITH JAM NUTS - $25/ALL 
• STEEL WEIGHT JACK LIGHT WEIGHT SPRING CUP - GOOD CONDITION PERFORMANCE BODIES P.N. PRP27351111 - $7
• 3/4" ALUMINUM CLEVIS - 3/4" RH  x 1/2" HOLE, 1/4" SLOT - RIGHT HAND ALUMINUM CLEVIS - $8.50
• COLEMAN MONO-BALL UPPER SCREW-IN BALL JOINT - COMPLETE WITH STUD AND SPACERS - COLEMAN P.N. COL834-405 - $35
• FRONT UPPER LW SPRING CUP - PERFORMANCE BODIES P.N. PRP27351111 - $7.50 (QTY of 2)
• ALLSTAR COIL SPRING SPACER - HIDDEN COIL SPRING SPACER, GOOD FOR 5" and 5 1/2" FRONT SPRINGS, GOOD USED CONDITION - P.N. ALL56116 - $12 (QTY of 2)
• ALLSTAR ADJUSTABLE COIL SPRING SPACER - HIDDEN ADJUSTABLE COIL SPRING SPACER, GOOD FOR 5" and 5 1/2" FRONT SPRINGS, GOOD USED CONDITION - P.N. ALL56118 - $24
• STOCK G-BODY UPPER BALL JOINT *NEW* - IN THE BOX, SHELF WORN - $10
• 3/4" STEEL CLEVIS END - 3/4"-16RH THREAD x 3/8" HOLE, 3/8" SLOT - $7.50 (QTY of 2)
• 8" STEEL WEIGHT JACK BOLT - GOOD SHAPE, STANDARD WEIGHT - P.N. 300-8 with JAM NUT - $5 
• 11" STEEL WEIGHT JACK BOLT - GOOD SHAPE, STANDARD WEIGHT - P.N. 300-11 with JAM NUT - $5 
• LIGHT WEIGHT ALUMINUM FRONT UPPER SPRING CUP and JACK BOLT - ALUMINUM UPPER SPRING SEAT FOR 5" and 5 1/2" DIA SPRINGS - 3.25" I.D. - WITH BOLTED TOGETHER 6" TALL JACK BOLT - STANDARD STYLE - GOOD SHAPE - $10 (QTY of 2)
• FRONT UPPER SWIVELER SPRING CUP - SWIVELER UPPER SPRING SEAT FOR 5" and 5 1/2" DIA SPRINGS - 3.25" I.D. - 6" TALL JACK BOLT - STANDARD STYLE - EXCELLENT SHAPE - P.N. COL20801 - $25 
• FRONT UPPER SPRING CUP - CONVENTIONAL UPPER SPRING SEAT FOR 5" and 5 1/2" DIA SPRINGS - STANDARD STYLE - GOOD SHAPE - $4 (QTY of 2)
• STEEL STUD/THREADED CONNECTOR - 9 1/2" LONG THREADED 3/4" FINE OUTSIDE - EACH END TAPPED 1/2" COARSE WAS BEING USED TO CONNECT (2) SWEDGE TUBES TOGETHER - $5
• 1/8" STEEL SPRING PLATE - FLAT SPRING PLATE for MOUNTING 6 1/2" O.D. - 3" I.D. - NEW - $3 (QTY of 6)
• 1/8" STEEL SPRING PLATE - FLAT SPRING PLATE for MOUNTING 6 3/8" O.D. - 3 1/2" I.D. W/1/8" RELIEF SLOT - NEW - $3 (QTY of 9)
• ALUMINUM UPPER A-ARM SPACERS - PAIR of UPPER A-ARM SPACERS - 6" CENTERED, 1/8" THICK and 3/8" THICK - BLACK ANODIZED - $8/pr
• 11" ALUMINUM WEIGHT JACK BOLT - *NEW* CONDITION - 1" COARSE THREAD - 1/2" DRIVE INVERTED HEAD - GUNDRILLED, ULTRA LIGHT - $15 (QTY of 4)
• 3/4" STEEL CLEVIS END - 3/4"-16RH THREAD x 3/8" HOLE, 3/8" SLOT - FLAT STYLE HEAD - LIKE NEW - LHC 049-200007 - $8
• GM G-BODY FRAME HORN SECTION - RIGHT SIDE - CUT OFF RIGHT SIDE FRAME HORN FROM A '78-'88 GM G-BODY - PRIMED AND READY, CUT 21" FROM THE FRONT FACE - $25
• GM G-BODY FRAME HORN SECTION - LEFT SIDE - CUT OFF LEFT SIDE FRAME HORN FROM A '78-'88 GM G-BODY - PRIMED AND READY, CUT 21" FROM THE FRONT FACE - $25
• COLEMAN BUMP STEER STUD KIT - RACK & PINION - COLEMAN P.N. 808-950 - *NEW* IN THE PACKAGE - INCLUDES SHIMS - $14
• PAIR of BALL JOINT PLATES - FITS SMALLER G-BODY STYLE BALL JOINTS - *NEW* STEEL PLATES - $7.50/pr
• 11" STEEL WEIGHT JACK BOLT - GOOD SHAPE, STANDARD WEIGHT - P.N. 300-11 - $5
• 5/8" STEEL CLEVIS END - 5/8"-18RH THREAD x 3/8" HOLE - 3/8" SLOT - FLAT STYLE HEAD -LIKE NEW - LHC P.N. 001-90780 - $7.50
• AFCO CENTERED CLAMP-ON SHOCK BRACKET - EXCELLENT CONDITION FOR 1 3/4" ROUND TUBING - $10 (QTY of 2)

• SWAY BAR and STABILIZER BAR ASSEMBLIES and MOUNTS
• 
• STOCK 1 1/8" DIAMETER SWAY BAR, 47" CENTER TO CENTER OF LINK MOUNTS - $25
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 3/4" BAR HOLE, 10" FROM EYE TO TIP, STEEL SOLID SHAFT, GOOD SHAPE, SMOOTH TOP - $5
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, SWIVEL BOTTOM EYE - 2" BAR HOLE, 13" FROM EYE TO TIP, STEEL SOLID SHAFT, GOOD SHAPE, RATCHET TOP WITH SKID PAD WELDED TO THE BOTTOM - $35
• MISC. USED SWAY BAR STAB EYE BOLTS - $4
• UNIVERSAL FRONT STABILIZER BAR, STANDARD STOCK STYLE STABILIZER (SWAY BAR), STD 36" CENTER, 46" CENTERED ENDS, 1-1/4" DIA. HOLLOW BAR, EYELETS ON RIGHT SIDE, LEFT SIDE CAPPED - $65
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE, 1 1/2" BAR HOLE, INCLUDES (1) JAM NUT, 10" FROM EYE TO TIP, STEEL, GOOD SHAPE - $5 (QTY of 2)
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE, 1 1/2" BAR HOLE, INCLUDES (1) JAM NUT, 10" FROM EYE TO TIP, ALUMINUM, GOOD SHAPE - $5 
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE, 1 1/2" BAR HOLE, INCLUDES (1) JAM NUT, 11" FROM EYE to TIP, STEEL, GOOD SHAPE - $5 
• HOWE SWAY BAR ADJUSTER - STABILIZER "EASY ADJUSTER" SWIVEL EYE BOLT, ACME THREADS, INCLUDES WELD NUT AND SLEEVE - $35
• 1 1/4" x 49 SPLINE HOLLOW STABILIZER BAR - 1 1/4" O.D. (350# RATE) - GOOD USED CONDITION - $75 (QTY of 2)
• STEEL STABILIZER BAR ARMS - GOOD CONDITION PAIR of SCHROEDER SWAY BAR ARMS - 15 DEG BEND, 2 1/2" OFFSET, 1 3/4" BAR, 48 SPLINE - $75/pr
• STEEL STABILIZER BAR ARMS - GOOD CONDITION PAIR of SCHROEDER SWAY BAR ARMS - "S" PATTERN, 2" OFFSET, 1 1/2" BAR, 49 SPLINE - $75/pr
• STEEL STABILIZER BAR ARMS - GOOD CONDITION PAIR of SCHROEDER SWAY BAR ARMS - "S" PATTERN, 2" OFFSET, 1 1/4" BAR, 49 SPLINE - $75/pr
• 1 1/4" x 49 SPLINE HOLLOW STABILIZER BAR - SPEEDWAY ENGINEERING .120" WALL - 1 1/4" O.D. (268# RATE w/12" ARMS) GOOD USED CONDITION, LOW MILEAGE - $75 
• 1 1/4" x 49 SPLINE HOLLOW STABILIZER BAR - SCHROEDER RACING PRODUCTS .120" WALL - 1 1/8" O.D. (425# RATE w/12" ARMS) GOOD USED CONDITION, LOW MILEAGE - $75 
• 1 1/4" x 49 SPLINE HOLLOW STABILIZER BAR - SCHROEDER RACING PRODUCTS .120" WALL - 1 1/8" O.D. (425# RATE w/12" ARMS) APPEARS TO HAVE NEVER BEEN INSTALLED - $75 
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE 1 1/2" BAR HOLE, 12" FROM EYE to TIP, STEEL SOLID SHAFT, GOOD SHAPE, SMOOTH TOP - $5 
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 1/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - OPEN BAR ON LEFT SIDE - 200# RATE - FITS '78-'88 G-BODY and many late models - COMPARABLE TO LEFTHANDER CHASSIS P.N. 2371-1 - $95 (QTY of 3)
• ADJUSTABLE RATE HOWE TUBULAR FRONT STABILIZER BAR - '93 and UP ADJUSTABLE RATE STABILIZER (SWAY BAR) - STD 33" CENTER, 41 1/2" CENTERED ENDS, 1 1/4" DIA TUBULAR BAR, THREADED INSERT ON RIGHT SIDE - OPEN BAR ON LEFT SIDE - HOWE P.N. HOW23794ASA - $75
• (2) STABILIZER EYE BOLT, 7/8" COARSE THREAD, FIXED BOTTOM EYE, 1 1/2" BAR HOLE, 11" FROM EYE TO TIP, STEEL SOLID SHAFT, GOOD SHAPE, SMOOTH TOP - $5.00/EA
• UNIVERSAL HOWE TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) - STD 30 1/2" CENTER, 42" CENTERED ENDS, 1 1/8"D TUBULAR BAR, EYELET ON RIGHT SIDE, OPEN BAR ON LEFT SIDE - NARROW FIT ASA CHASSIS, OLDER HOWE P.N. 2381-1 - $25 (QTY of 3)
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) - STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 3/8"D, TUBULAR BAR, EYELET ON RIGHT SIDE,  FITS '78-'88 G-BODY, END HAS BEEN MODIFIED TO ACCEPT STOCK LINKS ON BOTH SIDES, INCLUDES POLYURETHANE ENDS - $95
• ADJUSTABLE RATE HOWE TUBULAR FRONT STABILIZER BAR - '93 and UP ADJUSTABLE RATE STABILIZER (SWAY BAR) STD 34" CENTER, 45.5" CENTERED ENDS, 1 1/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - OPEN BAR ON LEFT SIDE - HOWE P.N. 23793 - $75
• STABILIZER EYE BOLT - ALUMINUM - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 1/2" BAR HOLE, 12" FROM EYE TO TIP, ALUMINUM SOLID SHAFT, (2) JAM NUTS, GOOD SHAPE - INVERTED HEX TOP - $10
• FACTORY SOLID FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 30" CENTER, 48" CENTERED ENDS, 1" D SOLID BAR, EYELETS ON BOTH ENDS - FITS '78-'88 G-BODY FRAME - $55
• STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 1/2" BAR HOLE, 10 1/2" FROM EYE TO TIP, STEEL SOLID SHAFT, GOOD SHAPE, INVERTED HEX TOP - $5 
• STEEL STABILIZER BAR ARM - 1 1/2" DIA x 48 SPLINE STRAIGHT ARM - 12 1/2" from BAR TO CONTACT PAD - $20 (QTY of 2)
• STEEL STABILIZER BAR ARM - 1 1/2" DIA x 48 SPLINE STRAIGHT ARM - 15" from BAR TO CONTACT PAD - $20
• STEEL STABILIZER BAR ARM - 1 1/2" DIA x 48 SPLINE 30deg ANGLE OUT ARM - 11" from BAR TO CONTACT PAD - $20
• FACTORY SOLID FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 30" CENTER, 46" CENTERED ENDS, 1" D SOLID BAR, EYELETS ON BOTH SIDES - FITS STOCK '78-'88 G-BODY FRAME - $55 
• HOWE UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 1/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - OPEN BAR ON LEFT SIDE (straight/not curve up) - 200# RATE - FITS '93 and UP HOWE and many late models - HOWE P.N. 23793 - $75 
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 1/16" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - GREEN - 175# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-4 - $75 (QTY of 3)
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 1/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - YELLOW - 200# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-2 - $75 (QTY of 3)
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 1/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - YELLOW - 200# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-2 - SCRAPED UP ON THE LEFT SIDE - $65 
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - BLUE - 150# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-3 - $75 (QTY of 3)
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 3/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - SILVER - 500# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-137HV - $115 
• UNIVERSAL TUBULAR FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STD 34" CENTER, 46 1/2" CENTERED ENDS, 1 3/8" D TUBULAR BAR, EYELET ON RIGHT SIDE - CAPPED BAR ON LEFT SIDE (older curve up) - BROWN - 400# RATE - FITS '78-'88 G-BODY and many late models - PORT CITY RACING P.N. 100-2-354-137 - $95 
• ALUMINUM STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 1/2" BAR HOLE, 10" FROM TOP of EYE TO TIP, ALUM SOLID SHAFT, (2) JAM NUTS, GOOD SHAPE - SMOOTH TOP - LHC P.N. 039-40-2111 - $15
• ALUMINUM STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 1/2" BAR HOLE, 7 1/2" FROM TOP of EYE TO TIP, ALUM SOLID SHAFT, (1) JAM NUT, GOOD SHAPE - LHC P.N. 039-40-2111 - $10
• ALUMINUM STABILIZER EYE BOLT - 7/8" COARSE THREAD, FIXED BOTTOM EYE - 1 1/2" BAR HOLE, 7 1/2" FROM TOP of EYE TO TIP, ALUM SOLID SHAFT, GOOD SHAPE - LHC P.N. 039-40-2111 - $10
• FACTORY G-BODY FRONT STABILIZER BAR - STANDARD, STOCK STYLE STABILIZER (SWAY BAR) STANDARD 44 1/2" CENTERED ENDS, MOUNTS AT 32" CENTERED - 1 1/4" DIA SOLID BAR - $100 

     SUSPENSION (REAR)                                                                                                                                                           

    (PANHARD BARS, BRACKETS, CLAMPS, PULL RODS, TORQUE ABSORBERS, ETC)

• ASSORTMENT OF ALUMINUM 3" AXLE CLAMP AND SPACERS, (1) CLAMP, (2) SPACERS - $5
• LIFT BAR ASSEMBLY - $45
• COLEMAN AXLE TUBE CLAMPS, #825-100, NEW BUT MISSING BOLT - $20/PR
• PANHARD BAR, 28 1/2" LENGTH, NO HEIMS - $25
• OLDER HOWE PANHARD BAR ADJUSTER, NEW, NEVER INSTALLED, INCLUDES 2 PIECE BRACKET, JACK BOLT, NUT W/ZERK - $60
• AFCO COIL OVER ELIMINATOR, NEW ROLLER BEARING DESIGN (PAR T NO. 20169RB) 15" - 24" - $100
• HOWE COIL OVER ELIMINATOR STANDARD DESIGN, PART NO. 30223, 13 1/4" - 20 1/2" - $50
• (2) AFCO COIL SLIDER REBUILD KITS, PART NO. 20171-10B - $22EA
• STEEL CAST SLIDING PANHARD BAR MOUNT, HOWE PART NO. 30780, CLAMPS TO 1 3/4" ROUND TUBING, GOOD CONDITION, RACE READY - $20
• FRONT CLAMP-ON MOUNT BRACKET for PANHARD BAR - 8" FRONT EXTENSION - $25-SOLD
• THIRD LINK BUSHINGS, NEW, STANDARD, BLACK 0 $8/PR
• LEFTHANDER CHASSIS ALUMINUM PANHARD BAR MOUNT, GOOD CONDITION FOR 1 1/2" TUBING, PART NO. 035-396-2 - $25
• FIXED PANHARD BAR, 20 1/2" - $40
• AFCO ADJUSTABLE J-BAR, CURRENTLY SET UP AS 24", GOOD CONDITION J BAR, AFCO PART NO. 20225 - $60
• MISC 9" FORD AND QUICK CHANGE PANHARD BAR BRACKETS - $10EA
• AFCO 22" ADJUSTABLE PRELOAD PANHARD BAR, AFC20225, IN GOOD SHAPE, ADJUSTABLE PRE-LOAD WITH RUBBER BUSHINGS AND ROD ENDS, WEIGHT 9.5 LBS - $80
• 5" COIL OVER ELIMINATOR - STANDARD HOWE STYLE P.N. 30221, 10 1/4" COLLAPSED, 15 1/4" EXTENDED - $35
• AFCO SPRING LOADED TORQUE LINK, SPRING LOADED TORQUE LINK PULL BAR, MOSTLY COMPLETE, NEEDS HEIMS ON BOTH ENDS. INDICATOR ROD AND TAB CRACKED OFF. INCLUDES 5" X 6" TALL 1050 "PR" (PULL ROD) SPRING, AFCO PART NUMBER AFC20210 - $65
• 5" COIL OVER ELIMINATORS, SOUTHWEST SPEED BRAND CO ELIMINATOR, COMPRESSED LENGTH APP. 17", EXTENDED LENGTH APP. 25", NICE CONDITION
• (2) ALUMINUM BIRDCAGE FOR DIRT LATE MODEL, '98 ROCKET, FAIR, USED SHAPE - $20
• LEFTHANDER UPPER 3RD LINK TORQUE ABSORBER, EXCELLENT SHAPE, BARE ASSEMBLY W/1600# SPRING, LEFTHANDER PART NO. LFT001-317-9-1600 - $65
• AFCO BEARING STYLE SPRING SLIDER, AFCO PART NO AFC20167RB, 15" COMP/22" EXT - 7" STROKE, VERY GOOD CONDITION UNIT - $95
• USED UPPER SPRING CUPS - $4/EA
• AFCO ADJUSTABLE COIL SPRING SPACER, HIDDEN ADJUSTER, GOOD FOR 5" AND 5 1/2" FRONT SPRINGS. NEW, NEVER INSTALLED - $30
• ALLSTAR ADJUSTABLE COIL SPRING SPACER, HIDDEN ADJUSTER, GOOD FOR 5" AND 5 1/2" FRONT SPRINGS, NEW, NEVER INSTALLED - $30
• PORT CITY 4-HOLE UPPER REAR END BRACKETS - GOOD CONDITION, 5 3/4" TALL FROM TOP REAR END MOUNTING HOLE TO TOP LINK - $20/PR
• LEFTHANDER CHASSIS CLAMP-ON REAR LOWER BRACKET FOR 5" O.D. SPRINGS - VERY GOOD, LIKE NEW CONDITION, P.N. 001-319-922 - $45
• LEFTHANDER CHASSIS CLAMP-ON REAR LOWER BRACKET FOR 5" O.D. SPRINGS - VERY GOOD, LIKE NEW CONDITION, MISSING SPRING CUP, P.N. 001-319-9033 - $25
• LHC MODIFIED CLAMP-ON REAR BRACKET - LEFT REAR CLAMP ON BRACKET, LHC P.N. 001-319-90-1 - $25 
• LEAF SPRING AXLE PERCHES - $5EA
• 5" SPRING COILOVER ADAPTER PLATES - $10EA
• SWEET PANHARD BAR - SWEET OVAL STYLE PAN HARD BAR, HEAVY DUTY STYLE, P.N. SWE501-60012, BARE "OVAL" ASSEMBLY, MODIFIED WITH 3/4" SPUDS ON BOTH SIDES (NO THROUGH HEIM) - $65
• SWEET ALUMINUM TRAILING ARM BRACKET - SWEET ALUMINUM TRAILING ARM BRACKET IN VERY GOOD CONDITION, P.N. SWE 501-60007 - $65 (QTY of 3)-SOLD (2), (1) LEFT
• FRONT MOUNT PANHARD BAR BRACKET - QUICK CHANGE SIDE W/ADJUSTER BOLT FOR PORT CITY AND PATHFINDER STYLE CHASSIS - $75
• CLAMP ON ADJUSTABLE PANHARD BAR BRACKET - GOOD SHAPE, CLAMPS TO 1 3/4" ROUND TUBING, 11" THREADED ADJUSTMENTS WITH STEEL TABS - $75
• AFCO ALUMINUM J BAR - EXCELLENT CONDITION, AFCO P.N. 20224AL, 3/4" MOUNTING EACH END - $80-SOLD
• HOWE COIL OVER ELIMINATOR - HOWE P.N. HOW 30224, COLLAPSED LENGTH 14 1/4", EXTENDED LENGTH 22 1/2" - GOOD CONDITION COMPLETE ELIMINATOR - $35
• HOWE STYLE COIL OVER ELIMINATOR - HOWE P.N. HOW30224, COLLAPSED LENGTH 14 1/4", EXTENDED LENGTH 22 1/2" - FAIR USED CONDITION, SHOWING AGE MISSING (1) HEIM - GOOD ASSEMBLY for SPARE or PARTS - $25
• OLDER HOWE STYLE COIL OVER ELIMINATOR - COLLAPSED LENGTH 16", EXTENDED LENGTH 22", WELL USED CONDITION, COMPLETE ELIMINATOR, GOOD SPARE ONLY - $15
• PORT CITY RACING PANHARD BAR - PCR OVAL STYLE PAN HARD BAR, LIGHT WEIGHT STYLE BARE "OVAL" ASSEMBLY - *NEW* NEVER INSTALLED - $75
• SWEET MULTI-ADJUSTABLE PANHARD BRACKET - GOOD CONDITION UNIT, MOUNTS TO QC REAR - INCLUDES BOLT AND SPACER - 5 POSITION ALUMINUM BRACKET - $35
• POLYURETHANE G-BODY REAR LOWER CONTROL ARM BUSHINGS - (2) BUSHINGS FOR (1) STOCK G-BODY TRAILING ARM *NEW* OUT OF THE PACKAGE - $20/pr
• 5/8" ALUMINUM TRAILING ARM - SMOOTH ROUND TUBING 5/8" WITH RIGHT AND LEFT HEIMS - 15" IN LENGTH - $15
• MULTI-ADJUSTABLE ALUMINUM PANHARD BRACKET - GOOD CONDITION UNIT, MOUNTS TO QC REAR, 5 HOLE POSITION ALUMINUM BRACKET - ANODIZED BLACK - $35
• PATHFINDER HOOP STYLE PANHARD BAR - OLDER STYLE RECTANGLE VERSION (PRE 2005) PANHARD BAR FOR PATHFINDER CHASSIS *NEW* NEVER INSTALLED - BARE NO ENDS - $20
• LONG PANHARD BAR - BARE, NO ENDS - MEASURES 26" FROM TIP TO TIP - $20
• STEEL PANHARD BAR BRACKET - PANHARD BAR BRACKET FOR QUICK CHANGE REAR ENDS - 4 POSITION - GOOD USED SHAPE - $10
• CLAMP ON AXLE MOUNT PANHARD BRACKET - GOOD CONDITION STEEL BRACKET - FRONT STYLE FOR LEFTHANDER 7 1/4" DEEP - LHC P.N. 001-31188 - $25
• LEFTHANDER UPPER 3RD LINK TORQUE ABSORBER, EXCELLENT SHAPE, BARE ASSEMBLY W/1200# SPRING, LEFTHANDER PART NO. 001-317-9-1200 (BLUE SPRING) - $60
• SOUTHWEST SPEED J-BAR, LOOKS TO BE NEVER INSTALLED, PERFECT SHAPE, PART NO. 570-599, MEASURES 19 1/2" CL TO CL - $50
• LEFTHANDER LIFT BAR BUSHING ASSEMBLY, GOOD CONDITION ASSEMBLY, LEFTHANDER PART NO. 001-3160-5 - $15
• LEFTHANDER UPPER 3RD LINK TORQUE ABSORBER RUBBER SNUBBER, LIKE NEW COMPLETE ASSEMBLY W/17" TUBE W/ROD ENDS, LEFTHANDER PART NO. 001-315 - $75
• AFCO SPRING LOADED TORQUE LINK, GOOD CONDITION ASSEMBLY W/7" TUBE, DOUBLE PULL SPRING, AFCO PART NO. AFC20412B - $75
• CLAMP ON COIL-OVER REAR AXLE BRACKET, 7 1/2" TALL, FRONT AND REAR SHOCK MOUNT, 2 TRAILING ARM POSITIONS, NICE SHAPE - $25
• CLAMP ON PANHARD BAR REAR AXLE BRACKET, 9 1/2" LONG, COLEMAN PART NO. COL675-109 - $30
• CLAMP ON PANHARD  BAR REAR AXLE BRACKET, 5 1/2" LONG, UB MACHINE PART NO. UBM46-1526 - $15
• 5/8" ALUMINUM TRAILING ARM - SMOOTH ROUND TUBING WITH RIGHT AND LEFT HEIMS - 13 1/2" in LENGTH - $15
• LEFTHANDER CHASSIS CONTROL ARM COIL-OVER CONTROL BRACKET - 7" CENTER TO BOTTOM HEIGHT - LHC P.N. 001-319-911 - SINGLE HOLE MOUNT - FITS '97 and OLDER LHC - GOOD CONDITION - $15
• LEFTHANDER CHASSIS CONTROL ARM COIL-OVER CONTROL BRACKET - 8 1/2" CENTER TO BOTTOM HEIGHT - LHC P.N. 001-319-912 - 2 HOLE MOUNT - FITS '97 and NEWER LHC - GOOD CONDITION - $25 (QTY of 2)
• ALUMINUM SLIDING PANHARD MOUNT - J-BAR - 3/4" BOLT SIZE - MOUNTS TO 1 1/2" TUBING FRAME SIDE - GOOD USED CONDITION - BLACK ANODIZED - $20
• SOUTHWEST SPEED SHORT SWING ARM - 2 POSITION - SHORT STYLE - 14" CL to CL - COMPLETE WITH HEIMS - EXCELLENT CONDITION - $20 (QTY of 2)
• ALLSTAR SHORT SWING ARM - 2 POSITION - SHORT STYLE - 13 1/2" CL to CL - NEEDS 3/4" HEIM ONE SIDE - EXCELLENT CONDITION - $20
• LONG PANHARD BAR - BARE, NO ENDS - MEASURES 31 1/2" FROM TIP to TIP - STRENGTH RIB GUSSET ACROSS THE TOP - $20
• LONG PANHARD BAR - COMPLETE WITH 3/4" HEIMS EACH END - MEASURES 32 1/2" FROM CENTER to CENTER - STRENGTH RIB GUSSET ACROSS THE TOP - $30
• SPEEDWAY LONG SWING ARM - 2 POSITION - LONG STYLE - 19" SWING ARM THAT MEASURES 20 1/2" CL to CL - 3/4" HEIMS - VERY GOOD CONDITION - $20
• AFCO J BAR - PANHARD BAR - OLDER VERSION of AFCO J BAR - PANHARD BAR (VERSION WITH THE TOP GUSSET ACROSS THE TOP LENGTH) - 20" LENGTH FROM CL to CL - INCLUDES NOTCHED AND SERRATED MOUNTING BOLT ASSEMBLY - $25
• PATHFINDER CHASSIS TUBULAR OVAL PANHARD BAR - GOOD CONDITION, NO DAMAGE BARE FRAME - $55
• SWEET PANHARD BAR - SWEET OVAL STYLE PAN HARD BAR, LIGHT WEIGHT STYLE - P.N. SWE501-60015, BARE "OVAL" ASSEMBLY - $55 (QTY of 2)
• PAIR of LOWER TRAILING ARM BUSHINGS - G-BODY, FITS '78-'88 MID-SIZE GM, MONTE, CUTLASS, GRAND PRIX, ETC - PAIR for STOCK FRONT UPPER A-ARM (*NEW* OUT OF THE BOX) - $20/pr-SOLD
• STEEL PANHARD J BAR - 21" STEEL J BAR, 3/4" HEIM EACH END - NO DAMAGE, GOOD CONDITION - $35
• ADJUSTABLE STEEL PANHARD J BAR - 19 1/2" STEEL J BAR, 3/4" HEIM EACH END - THREADED SLEEVE ON THE LONG END - NO DAMAGE, GOOD CONDITION - $35
• AXLE CLAMP SHOCK MOUNT - 3" I.D. AXLE CLAMP WITH SHORT SHOCK MOUNT - $12
• AXLE CLAMP SHOCK MOUNT - 3" I.D. AXLE CLAMP WITH 4" TALL 45deg ANGLE SHOCK MOUNT - $12
• STEEL SLIDING PANHARD BAR MOUNT - 2" SQUARE - FRAME SIDE - 3/4" THREAD IN BOLT SIZE (2) POSITION - TOP/BOTTOM - MOUNTS TO 2" SQUARE TUBING FRAME SIDE - GOOD USED CONDITION - $20
• STEEL 4 LINK BIRDCAGE - STEEL 4 LINK BIRDCAGE REMOVED FROM A '99 MASTERSBILT LATE MODEL IN DECENT SHAPE WITH SINGLE SIDE SHOCK MOUNT - NEEDS TEFLON LINER - $40
• SOUTHWEST SPEED J-BAR - VERY GOOD CONDITION, P.N. 570-599 - MEASURES 19 1/2" CL to CL - $35
• CLAMP ON AXLE MOUNT LONG PANHARD BRACKET - GOOD CONDITION STEEL BRACKET - FRONT STYLE ONLY 5" DEEP - $15
• CLAMP ON REAR AXLE TRAILING ARM/SHOCK BRACKET - 7" TALL, SINGLE SHOCK MOUNT - LIKE NEW SHAPE - LHC P.N. 001-319-90-1, FITS '96 and OLDER LHC and OTHERS - LEFT SIDE - $25 
• LEFTHANDER UPPER 3rd LINK TORQUE ABSORBER - GOOD CONDITION ASSEMBLY W/1600# SPRING - LEFTHANDER P.N. 001-317-9-1600 (RED SPRING) - INCLUDES 3/4" ALUMINUM HEX TUBE AND TEFLON HEIMS - 25" TOTAL LENGTH - LHC P.N. 001-315 - $85
• RHE PANHARD BAR/TRACK BAR ADJUSTER - SERRATED WELD-ON MAIN SIDE AND (2) SERRATED ADJUSTERS (1) ROUND, (1) SQUARE - $20
• HOWE STYLE COIL OVER ELIMINATOR - HOWE P.N. P.N. 30224 - COLLAPSED LENGTH 14 1/4", EXTENDED LENGTH 22 1/2" - LIKE NEW CONDITION - $55
• CLAMP ON REAR AXLE TRAILING ARM/SHOCK BRACKET - 5 1/2" TALL, DUAL SHOCK MOUNT - DECENT SHAPE - UNIVERSAL - $25
• CLAMP ON AXLE MOUNT BRACKET for PANHARD BAR - GOOD CONDITION STEEL BRACKET FRONT STYLE - ONLY 5 1/2" DEEP - $15
• REAR MOUNT LONG PANHARD BAR - INCLUDES 3/4" TEFLON LINED QA1 HEIMS - TOTAL LENGTH of 29" CL to CL - $25
• REAR MOUNT LONG PANHARD BAR - INCLUDES (1) 3/4" TEFLON LINED QA1 HEIM - TOTAL LENGTH of 32 1/2" CL to CL - $25
• LEFTHANDER RS RUBBER SNUBBER TRAILING ARM - GOOD CONDITION ASSEMBLY - LEFTHANDER P.N. 001-135 - INCLUDES 3/4" ALUMINUM HEX TUBE AND 3/4" HEIMS 27" TOTAL LENGTH (MISSING ONE HEIM) - $45
• LEFTHANDER RS RUBBER SNUBBER TRAILING ARM - GOOD CONDITION ASSEMBLY - LEFTHANDER P.N. 001-135 - INCLUDES 3/4" ALUMINUM HEX TUBE AND 3/4" HEIMS 29" TOTAL LENGTH - $65
• LEFTHANDER RS RUBBER SNUBBER TRAILING ARM - GOOD CONDITION ASSEMBLY - LEFTHANDER P.N. 001-135 - INCLUDES 3/4" ALUMINUM HEX TUBE AND 3/4" HEIMS 30" TOTAL LENGTH - $65
• LEFTHANDER UPPER 3rd LINK TORQUE ABSORBER - GOOD CONDITION ASSEMBLY W/1600# SPRING - LEFTHANDER P.N. 001-317-9-1600 (RED SPRING) - INCLUDES 3/4" ALUMINUM HEX AND 3/4" HEIMS - 26" TOTAL LENGTH CL to CL - (ONLY MISSING ONE HEIM) - $75
• LEFTHANDER UPPER 3rd LINK TORQUE ABSORBER - GOOD CONDITION ASSEMBLY W/1600# SPRING - LEFTHANDER P.N. 001-317-9-1600 (RED SPRING) - INCLUDES 3/4" ALUMINUM HEX AND 3/4" HEIMS - 23" TOTAL LENGTH - (MISSING BOTH HEIMS) - $60
• PATHFINDER CHASSIS ENGINE BAY STRUT TUBE - GOOD CONDITION TUBE - 3/4" ALUMINUM HEX ENGINE BAY STRUT TUBE W/3/4" CLEVIS EACH END - 29" CL to CL - THERE ARE A FEW 3/16" MOUNTING HOLES DRILLED THROUGH IT - FITS PATHFINDER AND OTHER LM CHASSIS - $15
• COLEMAN RS SNUBBER TRAILING ARM w/BUSHINGS - VERY GOOD CONDITION ASSEMBLY - COLEMAN P.N. COL 22040 - INCLUDES 3/4" ALUMINUM HEX TUBE (MISSING HEIMS) - 25 1/4" TOTAL LENGTH TIP to TIP - $65
• COLEMAN UPPER 3rd LINK TORQUE ABSORBER - VERY GOOD CONDITION ASSEMBLY - COLEMAN P.N. COL 22031 - INCLUDES 3/4" ALUMINUM HEX TUBE AND 3/4" HEIMS - 24" TOTAL LENGTH CL to CL - $125
• ADJUSTABLE UPPER QUICK CHANGE MOUNT/LINK/BRACKET, MADE BY ARGO MFG, NEW, NEVER USED, ARGO PART NO. RP910 TAAB - $95
• CLAMP ON REAR AXLE TRAILING ARM/SHOCK BRACKET - 7" TALL, SINGLE SHOCK MOUNT - DECENT SHAPE - MISSING CLAMP SIDE - LHC P.N. 001-319-911 - FITS '96 and OLDER LHC and OTHERS - $15
• UPPER QUICK CHANGE REAR END ALUMINUM BRACKETS - PAIR of 4 HOLE QUICK CHANGE REAR END BRACKETS - 4 HOLE POSITIONS - $15/pr
• STEEL 4 LINK BIRDCAGES - PAIR OF STEEL 4 LINK BIRDCAGES REMOVED FROM AN UNKNOWN BRAND DIRT MODIFIED IN DECENT SHAPE - BLACK POWDER COATED W/NICE CONDITION TEFLON LINERS - STANDARD CONFIGURATION - APPEAR TO BE OLDER VERSION SPEEDWAY CAGES - $100/pr
• STEEL SWING ARM BIRDCAGE - SINGLE SWING ARM BIRDCAGE - STEEL WITH 1" OFFSET FROM TOP TO BOTTOM LINKS - $40
• PATHFINDER HOOP STYLE PANHARD BAR - OLDER STYLE RECTANGLE VERSION (PRE 2005) - PANHARD BAR FOR PATHFINDER CHASSIS - *NEW* NEVER INSTALLED - BISCUIT STYLE BAR W/BISCUIT INSTALLED ON ONE END - $20
• PATHFINDER HOOP STYLE PANHARD BAR - OLDER STYLE RECTANGLE VERSION (PRE 2005) - PANHARD BAR PATHFINDER CHASSIS - *NEW* NEVER INSTALLED - INCLUDES 3/4" SPHERICAL BEARING INSTALLED - $20
• ALUMINUM PANHARD BAR BRACKET - QUICK CHANGE PINION ALUMINUM PANHARD J-BAR BRACKET - SINGLE SIDE 5 HOLE MOUNTING - $20
• COLEMAN ALUMINUM SLIDING PANHARD MOUNT - J-BAR - 3/4" HOLE, MOUNTS T0 2" SQUARE TUBING - FRAME SIDE - VERY GOOD CONDITION - COLEMAN P.N. 821-200 - $40 (QTY of 2)
• COLEMAN STYLE ALUMINUM SLIDING PANHARD MOUNT - J-BAR - 3/4" HOLE. MOUNTS TO 2" SQUARE TUBING FRAME SIDE - VERY GOOD CONDITION - SIMILAR TO COLEMAN P.N. 821-200, STAMPED COLEMAN P.N. 24306 - $35
• RIGHT FOOT PERFORMANCE ACCEL/DECEL SYSTEM - EXCELLENT CONDITION ASSEMBLY - USED ONLY 2 WEEKS - RIGHT FOOT P.N. 4600 - $195-SOLD
• ALUMINUM 4 LINK BIRDCAGE - ALUMINUM 4 LINK BIRDCAGE REMOVED FROM AN UNKNOWN BRAND DIRT LATE MODEL IN DECENT SHAPE W/NICE CONDITION TEFLON LINER - STANDARD CONFIGURATION - APPEARS LEFT SIDE and APPEARS TO BE OLDER VERSION of a SPEEDWAY CAGE - $75
• LEFTHANDER CLAMP-ON BRACKET for 5" O.D. SPRINGS - LS CLAMP-ON BRACKET - MEASURES 4" FROM MOUNTING HOLE TO BOTTOM of AXLE TUBE W/SPRING CUP - LHC P.N. 001-319-9011 IN GOOD USED CONDITION - $35-SOLD
• LEFTHANDER CLAMP-ON BRACKET for 5" O.D. SPRINGS - RS CLAMP-ON BRACKET - MEASURES 4" FROM MOUNTING HOLE TO BOTTOM of AXLE TUBE W/SPRING CUP - LHC P.N. 001-319-9022 IN GOOD USED CONDITION - $35-SOLD
• STEEL PANHARD BAR BRACKET - FORD 9" PINION STEEL PANHARD J-BAR BRACKET - SINGLE SIDE 4 HOLE MOUNTING - ALLSTAR P.N. ALL60176 - $15-SOLD
• UPPER QUICK CHANGE REAR END STEEL BRACKETS - PAIR of 3 HOLE QUICK CHANGE REAR END BRACKETS - 3 HOLE POSITIONS - P.N. 032-316-7 - $15/pr
• UPPER QUICK CHANGE REAR END ALUMINUM BRACKETS - PAIR of 3 HOLE QUICK CHANGE REAR END BRACKETS - 3 HOLE POSITIONS - P.N. 086-316-7A - $15/pr
• QUICKCAR UPPER 3rd LINK TORQUE ABSORBER - GOOD CONDITION ASSEMBLY W/PAIR OF RED (MED) BISUITS - QUICKCAR P.N. QRP66500 (RED SPRING) - SHORT STYLE "MODIFIED" TORQUE ABSORBER - MISSING ONE FRONT BUSHING - $65-SOLD
• HOWE STEEL CAST SLIDING PANHARD MOUNT- J-BAR - 3/4" BOLT, MOUNTS TO 1 3/4" TUBING FRAME SIDE - VERY GOOD CONDITION - HOWE P.N. 30780 - $20-SOLD
• STEEL SLIDING PANHARD BAR MOUNT - 2" SQUARE - FRAME SIDE - GOOD USED CONDITION - PAINTED BLACK - $15
• STEEL SLIDING PANHARD MOUNT - J-BAR - 3/4" BOLT, MOUNTS TO 1 3/4" TUBING FRAME SIDE - VERY GOOD CONDITION - 3/16" THICK STEEL U-STRAP - $15

          STEERING (WHEELS, RACKS, BOXES, PUMPS, QUICKENERS, ETC)

• GM PITMAN ARMS, 5" WITH 1/2" DROP - $15, 7" NO DROP - $15, 6" NO DROP - $15, 6 1/2" NO DROP - $15, 6 1/2" WITH 2" DROP - $15, 5 1/2", WITH 1/2" DROP - $15
• PITMAN ARMS, $15 EACH 6" - 1" DROP, 5 1/2" - 3/4" DROP
• PITMAN ARM, 5" - 1/2" DROP - $45
• FACTORY STYLE POWER STEERING HOSE, PRESSURE SIDE, 21" LONG - $10
• POWER STEERING RESERVOIR CLAMP SET-UP - $10
• 6-7/8" PITMAN ARM, STOCK PITMAN ARM OFF OF A CAMARO STEERING BOX, SPLINES WILL FIT G-BODY STEERING BOX. MEASURES 6-7/8" LONG (CENTER TO CENTER) WITH 1" DROP, IN EXCELLENT CONDITION - $45
• 5-1/2" PITMAN ARM, SPLINE FITS GM STEERING BOX, MEASURES 5 1/2" LONG (CENTER TO CENTER) WITH A 1" DROP, IN EXCELLENT CONDITION - $15
• 5-1/2" PITMAN ARM, SPLINE FITS GM STEERING BOX, MEASURES 5-1/2" LONG (CENTER TO CENTER) WITH A 1/2" DROP, IN GOOD CONDITION, A FEW SMALL MARKS - $15
• REBCO STEERING KIT, REBCO STEERING DISCONNECT HUB, PART NO. REB8630, MISSING 360 SPLINE, ALSO INCLUDES ALUMINUM 3-FINGER FIREWALL MOUNT, ALL NEW ITEMS, TORN PACKAGING - $30
• PAIR of HEX SHAFT TIE RODS - COMPLETE PAIR OF TIE RODS WITH 5/8" TAPERED END TO FIT FACTORY SPINDLE APPLICATIONS, 6" STANDARD 5/8" TAPERED ENDS, 1/2" ALUMINUM HEIM OTHER END, 12" ALUMINUM HEX ONE END, 13" ALUMINUM HEX, OTHER END 18" AND 20 1/2" TOTAL LENGTHS, LIKE NEW ASSEMBLIES - $35/PAIR
• GM C.J.R. SAGINAW STEERING BOX. 16:1 RATIO, BUILT BY C.J.R., TOP CUP TEAM TAKE-OFF WITH ONLY 1 OR 2 RACES. CLEANED, CHECKED OVER, INTERNALS IN EXCELLENT CONDITION, SEALS IN DECENT SHAPE, -6AN FITTINGS, FITS MOST GM VEHICLES, HD 13/16", -36 SPLINE, READY TO BOLT ON - $150 
• CUSTOM ALUMINUM WATER NECK AND POWER STEERING TANK - MOUNTS ON TOP OF INTAKE ON WATER NECK - ALLOWS (2) FITTINGS FOR REAR INTAKE FLOW, INTEGRAL POWER STEERING TANK - $45
• GM '78-'88 G-BODY POWER STEERING PITMAN ARM - FACTORY 6 1/4" LENGTH, 2" DROP FOR SMALLER 605 BOX, EXCELLENT CONDITION - $45  (QTY of 2)
• GM '68-'72 CHEVELLE POWER STEERING PITMAN ARM - FACTORY 5" LENGTH, 1/4" DROP for STANDARD SAGINAW BOX, EXCELLENT CONDITION - $45
• SWEET MANUFACTURING POWER STEERING PULLEY - EXCELLENT UNRACED CONDITION, REMOVED FOR A DIFFERENT STYLE PULLEY, SWEET P.N. 301-30022, 7 3/8" O.D. SPEEDWAY PULLEY - $50 (qty of 2)
• SWEET STYLE POWER STEERING PUMP - ALUMINUM SWEET STYLE PUMP (1100# psi) FOR 235 VALVE SERVO - NEVER RAN SINCE FRESH FROM LEE - FRESH UNIT CARRIED AS A SPARE FOR A HOOTERS PRO CUP CAR - $85
• SWEET POWER STEERING ASSEMBLY - NICE ASSEMBLY, COMPLETE FROM LINES TO RESERVOIR - ALUMINUM SWEET PUMP (1100# psi) WITH 4 1/2" DIAMETER SERPENTINE PULLEY (P.N. CVD73220), ALL 3 LINES, AND BILLET CV PRODUCTS ALUMINUM RESERVOIR - REMOVED FROM A WINNING PRO CUP CAR - $250
• ADJUSTABLE GM IDLER ARM - UNKNOWN YEAR, UNKNOWN SPECIFIC APPLICATION - BOLT ON ADJUSTABLE ARM for SETTING BUMP STEER - $10 (QTY of 2)
• SWEET MANUFACTURING GM SAGINAW STEERING BOX - 16:1 RATIO SWEET BOX - TOP CUP TEAM TAKE-OFF WITH ONLY A FEW RACES, CLEANED, CHECKED OVER INTERNALS IN EXCELLENT CONDITION - SEALS IN DECENT SHAPE, -6AN FITTINGS - FITS MOST GM VEHICLES, HD 13/16" - 36 SPLINE, READY TO BOLT ON - $100 (QTY of 3)-SOLD ALL (3)
• STEERING U-JOINT 3/4"-36 - NEW - NEVER INSTALLED, P.N. 910-32236-PLN - $45
• 3/4" STEERING SHAFT STOP - NEW - NEVER INSTALLED, P.N. 910-32378 - $10
• HEAD MOUNT POWER STEERING BRACKET - NEW - NEVER INSTALLED, P.N. 910-32904 - $25-SOLD
• GM '68-'72 CHEVELLE POWER STEERING PITMAN ARM - FACTORY 5" LENGTH, 1/2" DROP for STANDARD SAGINAW BOX - GOOD CONDITION, EXCEPT CENTER LINK HOLE IS EGGED and WOULD BE NEEDED TO BE BUSHED or DRILL TO 5/8" - $35 
• CV PRODUCTS POWER STEERING RESERVOIR ASSEMBLY - CV PRODUCTS NEW TRICK LIGHT WEIGHT POWER STEERING RESERVOIR ASSEMBLY, MOST PARTS "NEW IN THE BOX" - FITS SWEET PUMPS, CV PRODUCTS P.N. CV4250 - $75 
• WOODWARD UPPER SECTION STEERING COLUMN - REMOVED FROM A BUSCH CAR IN GOOD PHYSICAL CONDITION, P.N. SCA700, JACKET LENGTH of 17 3/4" LONG - $135
• HEAD MOUNT POWER STEERING BRACKET KIT - COMPLETE BRACKET KIT IN VERY GOOD SHAPE - FOR SWEET and SIMILAR DESIGN PUMPS - $25-SOLD
• STEERING SHAFT SECTION - 49" LONG, 3/4" SHAFT - ECONOMY, LOW DOLLAR SHAFT, WELDED IN THE MIDDLE, 103 U-JOINT ONE END, 102 COUPLER ON THE OTHER - OLDER PIECE, U-JOINT GETTING A BIT TIRED, CHEAP FOR AN ENDURO OR DEMO CAR - $15
• SWEET MFG POW